Medalist Power Wheelchair Owner's Manual

For service assistance, please call your authorized ActiveCare dealer.Assembly1. Loosen and remove the two knobs on the shroudbehind the seat post. Lift the cover shroud upward toremove it.2. Install the seat post. Ensure that the seat post isaligned so that the two flanges with holes are facing therear of the product. Having these flanges rotated intoany other position will result in instability in the seat.3. From behind the product, looking forward, insert theseat bolt into hole on the left side of the seat post. Thisbolt is also used to adjust the seat height. Insert the boltas far into the hole as it will go, making sure that thebolt passes all the way through to the hole on theopposite side. Install the washer and nut and tightenthem using the included flat wrench.4. Connect both battery connectors to the main cable.7 Medalist Owner’s Manual