core-flo dc brochure - Bisco, Inc.

Dual-Cured Flowable Core Build-Up/Dentin Replacement Material“CORE-FLO DC is a great material,good flow, and great handling!”Dr. Jack D. Griffin Jr., Private Practice, Eureka Springs, MOHIGH STRENGTH AND LOW WATER SORPTIONASSURES A STRONG FOUNDATION FOR CROWNSAND DIRECT RESTORATIVES - CUTS JUST LIKE DENTINNON-SLUMPING MATERIAL ALLOWS FORPREDICTABLE PLACEMENT AND A SIMPLIFIED COREBUILD-UP AND POST CEMENTATION TECHNIQUECORE-FLO DC is a versatile dual-cured, fluoride-containingmaterial that is ideal for core build-ups, post cementation anddentin replacement. CORE-FLO DC is radiopaque and availablein two aesthetic shades, NATURAL/A1 and OPAQUE WHITEand a contrasting BLUE to meet all of your direct and indirectrestorative requirements.LOW SHRINKAGE PROPERTIES ALLOW IT TO BEUSED EFFECTIVELY AS A DENTIN REPLACEMENTMATERIALEXCELLENT FLOWABILITY - VOID-FREE FLOW MAKESIT IDEAL FOR POST CEMENTATIONPHYSICAL PROPERTIESLight-Cured Self-CuredDiametral Tensile Strength 53 (4) MPa 48 (2) MPaCompressive Strength 266 (17) MPa 261 (8) MPaFlexural Strength 129 (15) MPa 114 (16) MPaFlexural Modulus 11 (0.4) GPa 10 (0.2) GPaBarcol Hardness 76 (1) 71 (1)Dentistry courtesy of Michael Morgan, D.D.S.Shrinkage 2.5 (0.05)% 2.2 (0.1)%Film Thickness 25 (3.4) µmPhoto courtesy ofMichael Morgan, D.D.S.HIGH RADIOPACITYCORE-FLO DC iseasily identifiable on aradiograph for quickand effortless diagnosis.Radiopacity1.6 (0.08) mmWater Sorption Wsp =13 (1.1) ug/mm 3Water Solubility Wsi = 0 ug/mm 3At room temperature (20°C/68°F - 25°C/77°F):Working Time:Minimum 2 minutesSetting Time:Maximum 7 minutesData on file. BISCO, Inc.

YOUR RESTORATION IS ONLY AS STRONGAS ITS CORE FOUNDATIONIDEAL HARDNESS - CUTS JUST LIKE DENTINOnce cured, CORE-FLO DC is easy to prepare. It has perfect hardnessin both light-cured and self-cured modes for sculpting with rotaryinstruments; it is not too soft and not too hard.High Initial Barcol HardnessSUPERIOR PHYSICAL PROPERTIESCORE-FLO DC has excellent fatigue resistance and similar modulusof elasticity of natural dentin. Clinicians will get long lastingdurable restorations when cementing posts and restoring a core withCORE-FLO DC.High Compressive Strength in SC and LC ModeEXCELLENT COMPATIBILITY WITH BISCO ADHESIVEHigh Flexural Modulus in SC and LC ModeThe combination of CORE-FLO DC and ONE-STEP ® offer unsurpassedbond strengths to the dentin, enamel and fiber post. No other corematerial and its corresponding adhesive come close!High Shear Bond StrengthINTEGRITY OF THE CORESEM Imaging of CORE-FLO DC and DMG America’s LuxaCore Z Dual.The SEM of LuxaCore Z Dual shows voids/bubbles within the resin.Development of defects, along the interface of the post, may negativelyaffect the strength of the abutment, thus increasing the risk of microcrackpropagation and fracture under functional loading.Clearfil is a registered trademark of Kuraray.LuxaCore and LuxaBond are registered trademarks of DMG America.Tenure is a registered trademark of Denmat.Build-It and Bond-1 are registered trademarks of Pentron.FR is a trademark of Pentron.BISCO’sCORE-FLO DCDMG America’sLuxaCore Z Dual

BOTTOM UP DENTISTRY. TOP DOWN ESTHETICS.POST CEMENTATION AND CORE BUILD-UP TECHNIQUE12Apply UNI-ETCH ® w/BAC tothe canal. Etchfor 15 seconds.Rinse.Remove excessmoisture.Apply 2 coats ofONE-STEP ® /ONE-STEP ® PLUS. Blotexcess from canaluntil dry.Light cure for 10seconds.Determine postlength.Coat the post withONE-STEP/ONE-STEP PLUS. Lightcure for 10 seconds.12Prepare the Dual-Syringe Dispenserfor CORE-FLO DC.ExpressCORE-FLO DC.Seat the post,maintaining firmpressure for 5-10seconds.Continue to expressCORE-FLO DCaround the post tobuild-up the core.Remove excessmaterial and lightcure for 40 secondsor allow toself cure.Completepreparation priorto impression.ORDERING INFORMATIONCORE-FLO DCCORE-FLO DC NATURAL/A1 - OPAQUE WHITE INTRO KIT1 Dual-Syringe CORE-FLO DC Shade: NATURAL/A1 (Base/Catalyst, 8g mixed),1 Dual-Syringe CORE-FLO DC Shade: OPAQUE WHITE (Base/Catalyst, 8g mixed),1 Syringe UNI-ETCH w/BAC (5g), 1 Bottle ONE-STEP (2ml),Accessories, Instructions/MSDSPlus a dual-syringe dispenser is also provided.CORE-FLO DC BLUE INTRO KIT2 Dual-Syringes CORE-FLO DC Shade: BLUE (Base/Catalyst, 8g mixed ea.),1 Syringe UNI-ETCH w/BAC (5g), 1 Bottle ONE-STEP (2ml),Accessories, Instructions/MSDSPlus a dual-syringe dispenser is also provided.CORE-FLO DC - 1 Dual-Syringe (Base/Catalyst 8g, mixed), Accessories, Instructions/MSDSNATURAL/A1OPAQUE WHITEBLUETO ORDER CALL:1-800-BIS-DENT (800-247-3368)www.bisco.comRx OnlyMC-2033CFA-23110KA-23120KA-23011PA-23012PA-23013P