KR 10 scara R600, R850 WP - KUKA Robotics

More documents

Recommendations

Info

KR 10 scara R600, R850 WP38 / 57 Issued: 26.03.2010 Version: Spez KR 10 scara WP V5 en
4. Planning4 Planning4.1 Mounting baseDescriptionThe robot is fastened to the mounting base with 4 bolts. A suitable steel constructioncan be used as the mounting base. The mounting surface must be atleast 20 mm thick. It must be ensured that the steel structure is able to withstandsafely and permanently the dynamic loads (>>> 2.4 "Loads acting onthe mounting base" page 15) to which it is subjected.In order to fasten the robot to a concrete foundation, a suitable steel plate mustbe prepared and fastened to the concrete foundation.The connecting cables to the robot controller must be installed in a cable duct.If required, additional measures must be taken to ensure electromagneticcompatibility (EMC).Caution!Installation, connection and start-up of the robot must be carried out in accordancewith the applicable national laws and regulations.The robot may only be started up if the applicable regulations have been observed.Hole patternThe following holes must be used for mounting the robot.Fig. 4-1: Hole pattern for KR 10 scara4.2 Instructions for mechanical axis range limitationDescriptionThe robot’s working envelope can be reduced to the required minimum in axes1 to 3 using mechanical axis range limitation systems.Warning!If the mechanical axis range limits are changed, the robot could collide withits end stops, resulting in damage to the robot and its tooling. The softwarelimit switches must be set to a position at least 2 to 3° in front of the axis rangelimits.In order to be able to use the mechanical axis range limitations, it is necessaryto construct it. Instructions are supplied.Issued: 26.03.2010 Version: Spez KR 10 scara WP V5 en39 / 57
Page 1 and 2: RobotsKUKA Roboter GmbHKR 10 scara
Page 4 and 5: KR 10 scara R600, R850 WP3.9 Applie
Page 6 and 7: KR 10 scara R600, R850 WPFig. 1-2:
Page 8 and 9: KR 10 scara R600, R850 WPAmbient co
Page 10 and 11: KR 10 scara R600, R850 WPWorkingenv
Page 18 and 19: KR 10 scara R600, R850 WP18 / 57 Is
Page 20 and 21: KR 10 scara R600, R850 WPthe indivi
Page 22 and 23: KR 10 scara R600, R850 WPPersonnel
Page 24 and 25: KR 10 scara R600, R850 WPTrigger T1
Page 26 and 27: KR 10 scara R600, R850 WPOperating
Page 28 and 29: KR 10 scara R600, R850 WPWarning!Th
Page 30 and 31: KR 10 scara R600, R850 WP3.7 Overvi
Page 32 and 33: KR 10 scara R600, R850 WP3.8.3 Star
Page 34 and 35: KR 10 scara R600, R850 WPThe follow
Page 36 and 37: KR 10 scara R600, R850 WP3.8.9 Deco
Page 40 and 41: KR 10 scara R600, R850 WPAxis Mecha
Page 42 and 43: KR 10 scara R600, R850 WPAxis range
Page 48 and 49: KR 10 scara R600, R850 WPBelgiumKUK
Page 50 and 51: KR 10 scara R600, R850 WPMalaysiaKU
Page 52 and 53: KR 10 scara R600, R850 WPSouth Afri
Page 56 and 57: KR 10 scara R600, R850 WPManual Red

KR 10 scara R600, R850 WP - KUKA Robotics

Create successful ePaper yourself

Delete template?

Save as template?