KR 10 scara R600, R850 WP - KUKA Robotics

More documents

Recommendations

Info

KR 10 scara R600, R850 WPthe individual components, with particular reference to the maintenance specifications.MisuseAny use or application deviating from the intended use is deemed to be impermissiblemisuse. This includes e.g.:• Transportation of persons and animals• Use as a climbing aid• Operation outside the permissible operating parameters• Use in potentially explosive environments• Operation without additional safeguards• Outdoor operation3.1.3 EC declaration of conformity and declaration of incorporationThis industrial robot constitutes partly completed machinery as defined by theEC Machinery Directive. The industrial robot may only be put into operation ifthe following preconditions are met:• The industrial robot is integrated into a complete system.Or: The industrial robot, together with other machinery, constitutes a completesystem.Or: All safety functions and safeguards required for operation in the completemachine as defined by the EC Machinery Directive have been addedto the industrial robot.• The complete system complies with the EC Machinery Directive. This hasbeen confirmed by means of an assessment of conformity.Declaration ofconformityDeclaration ofincorporationThe system integrator must issue a declaration of conformity for the completesystem in accordance with the Machinery Directive. The declaration of conformityforms the basis for the CE mark for the system. The industrial robotmust be operated in accordance with the applicable national laws, regulationsand standards.The robot controller is CE certified under the EMC Directive and the Low VoltageDirective.The industrial robot as partly completed machinery is supplied with a declarationof incorporation in accordance with Annex II B of the EC Machinery Directive2006/42/EC. The assembly instructions and a list of essentialrequirements complied with in accordance with Annex I are integral parts ofthis declaration of incorporation.The declaration of incorporation declares that the start-up of the partly completedmachinery remains impermissible until the partly completed machineryhas been incorporated into machinery, or has been assembled with other partsto form machinery, and this machinery complies with the terms of the EC MachineryDirective, and the EC declaration of conformity is present in accordancewith Annex II A.The declaration of incorporation, together with its annexes, remains with thesystem integrator as an integral part of the technical documentation of thecomplete machinery.20 / 57 Issued: 26.03.2010 Version: Spez KR 10 scara WP V5 en
3. Safety3.1.4 Terms usedTermAxis rangeStopping distanceWorkspaceOperator(User)Danger zoneKCPManipulatorSafety zoneStop category 0Stop category 1Stop category 2System integrator(plant integrator)T1T2External axisDescriptionRange of each axis, in degrees or millimeters, within which it may move.The axis range must be defined for each axis.Stopping distance = reaction distance + braking distanceThe stopping distance is part of the danger zone.The manipulator is allowed to move within its workspace. The workspaceis derived from the individual axis ranges.The user of the industrial robot can be the management, employer ordelegated person responsible for use of the industrial robot.The danger zone consists of the workspace and the stopping distances.The KCP (KUKA Control Panel) teach pendant has all the operator controland display functions required for operating and programming theindustrial robot.The robot arm and the associated electrical installationsThe safety zone is situated outside the danger zone.The drives are deactivated immediately and the brakes are applied. Themanipulator and any external axes (optional) perform path-orientedbraking.Note: This stop category is called STOP 0 in this document.The manipulator and any external axes (optional) perform path-maintainingbraking. The drives are deactivated after 1 s and the brakes areapplied.Note: This stop category is called STOP 1 in this document.The drives are not deactivated and the brakes are not applied. Themanipulator and any external axes (optional) are braked with a normalbraking ramp.Note: This stop category is called STOP 2 in this document.System integrators are people who safely integrate the industrial robotinto a complete system and commission it.Test mode, Manual Reduced Velocity ( 250 mm/s permissible)Motion axis which is not part of the manipulator but which is controlledusing the robot controller, e.g. KUKA linear unit, turn-tilt table, Posiflex.3.2 PersonnelThe following persons or groups of persons are defined for the industrial robot:• User• PersonnelAll persons working with the industrial robot must have read and understoodthe industrial robot documentation, including the safety chapter.UserPersonnelThe user must observe the labor laws and regulations. This includes e.g.:• The user must comply with his monitoring obligations.• The user must carry out instruction at defined intervals.Personnel must be instructed, before any work is commenced, in the type ofwork involved and what exactly it entails as well as any hazards which may exist.Instruction must be carried out regularly. Instruction is also required afterparticular incidents or technical modifications.Issued: 26.03.2010 Version: Spez KR 10 scara WP V5 en21 / 57
Page 1 and 2: RobotsKUKA Roboter GmbHKR 10 scara
Page 4 and 5: KR 10 scara R600, R850 WP3.9 Applie
Page 6 and 7: KR 10 scara R600, R850 WPFig. 1-2:
Page 8 and 9: KR 10 scara R600, R850 WPAmbient co
Page 10 and 11: KR 10 scara R600, R850 WPWorkingenv
Page 18 and 19: KR 10 scara R600, R850 WP18 / 57 Is
Page 22 and 23: KR 10 scara R600, R850 WPPersonnel
Page 24 and 25: KR 10 scara R600, R850 WPTrigger T1
Page 26 and 27: KR 10 scara R600, R850 WPOperating
Page 28 and 29: KR 10 scara R600, R850 WPWarning!Th
Page 30 and 31: KR 10 scara R600, R850 WP3.7 Overvi
Page 32 and 33: KR 10 scara R600, R850 WP3.8.3 Star
Page 34 and 35: KR 10 scara R600, R850 WPThe follow
Page 36 and 37: KR 10 scara R600, R850 WP3.8.9 Deco
Page 40 and 41: KR 10 scara R600, R850 WPAxis Mecha
Page 42 and 43: KR 10 scara R600, R850 WPAxis range
Page 48 and 49: KR 10 scara R600, R850 WPBelgiumKUK
Page 50 and 51: KR 10 scara R600, R850 WPMalaysiaKU
Page 52 and 53: KR 10 scara R600, R850 WPSouth Afri
Page 56 and 57: KR 10 scara R600, R850 WPManual Red

KR 10 scara R600, R850 WP - KUKA Robotics

Create successful ePaper yourself

Delete template?

Save as template?