ALPINE SKI & SNOWBOARD PREPARATION

CERA F SOLID TURBO ROTO FLEECE APPLICATION
1.
Rub on an even layer.
2.
Use the T18F Roto Fleece at a speed of approx.
1.500 RPM. Start from the tip and work the
Cera F into the base by moving the drill back
and forth approx. a foot at a time as you work
your way towards the tail. Use light pressure.
3.
Use the 16M Horsehair Roto Brush with speed
1.500 RPM. Start from the tip and move back
and forth approx. a foot at a time towards the
tail. (OBS! Do not use the same brush as for
standard waxes.) Use light pressure.
4.
Finish with the T17W Blue or White Nylon Roto
Brush. Twice in one continuous pass from tip to
tail in four to five seconds. (OBS! Do not use the
same brush as on standard waxes.) Use light
pressure.
CERA F SOLID TURBO HAND CORK APPLICATION
1.
Rub on an even layer.
2.
Cork in with a Natural Cork (T20/T22).
3.
Brush with the Blue Nylon Brush (T160).
Approx. 10 strokes.
52 53