ALPINE SKI & SNOWBOARD PREPARATION

CERA F POWDERS,
SOLIDS AND LIQUID
SWIX CERA F – Still...
• the Most Trusted
• the Fastest
• the Highest Purity
• the Most Podium Results
Refinements and improvements were made to
the Cera F Line in 2008, and testing is
ongoing as usual for further refinements in the
quest to be able to supply racers and snowboard
riders with the best possible glide performance.
There are many fluorocarbon products in the
market, but very few have gone through the
synthesizing steps to modify the fluorocarbon
powder like Cera F for specific use on ski and
snowboard bases.
Swix Cera F has a coded batch production system
for tracking quality control. The result is:
• Longevity, outstanding base bonding capacity
• Speed and acceleration
• Resistance to snow contaminants
• Exceptional purity for best performance
Also, Cera F powders, waxes and liquids do not
contain CFCs and are not harmful to the environment.
Safety reminder
Neither Cera F powder or its vapor from ironing
should be exposed to temperatures
above 300°C (570°F). Therefore avoid exposure
to torches, heat guns, space heater, and
cigarette smoking.
Recommended ironing temperatures for
Cera F are approximately 150°C/165°C
(300°F/330°F) which are far below the level
for Cera F decomposition.
20 21