1 - Wescor Inc.

S E C T I O N 2SWEAT INDUCTION AND ANALYSIS2.1 Performing the Sweat Test15 Remove Holders and Sensor, and CleanElectrodesDisconnect the cable from the sensor,remove the sensor from the holder and discardthe used sensor. Disconnect the cableplug from the socket of the SweatInduction/Analysis module and turn OFFthe power.Remove the holders from the patient andgently wash and dry the entire skin areasinvolved in the test.Wash and dry the electrode plates.wash & dry metal platesNANODUCT(Date) (Time)Check ControlsIontophoresisSweat AnalysisRecall Reading16 Recall the Display ReadingIf you selected SUPPRESS READINGS, or ifthe control unit powers off, the last readingcan be recalled by selecting RECALL READ-ING on the display menu and pressingENTER.Recall Reading also outputs the last readingto the serial port where it can be printedif a serial printer is connected to the port.22