TERCERA ™ Owner's Manual - Del Mar Fans and Lighting

LIGHT HARDWARETercera E11 50W Halogen BulbLIGHT INSTALLATIONGlass AssemblyStep 1. Install both Halogen Bulbs into the LightKit. Figure 1.Note: When replacing bulbs, only replace with max50 watt bulbs.IMPORTANT ! When installing the halogen bulb,carefully cut off the end of the plastic sleeve thebulb comes in and hold the bulb by the plasticsleeve to screw it into the socket.FIGURE 1.Step 2. Position the indentations in the outer rim ofthe glass shade so that they line up with the tabs onthe inside surface of the fan light fixture rim.Step 3. Carefully lift the glass shade up inside thelight fixture as far as it will go. Figure 2.FIGURE 2.Step 4. Rotate the shade in a clockwise directionuntil it is held tightly in place by the four tabs. Figure3.FIGURE 3.15