VALUE. SERVICE. QUALITY.

CAP MATERIALTHERMOSET or PHENOLIC (BAKELITE)These caps are known for providing the widest rangeof chemical compatibility and for being the mosttemperature tolerant of plastic closures. They alsoprovide the most consistent adherence to closedimensional tolerances. Ideal for pharmaceuticalapplications. Thermoset closures cannot be remeltedafter they are formed. Common resins include urea,phenolic and melamine.METAL400Division of All-Pak, Inc.Metal caps offer the widest range of temperaturetolerances and are very resistant to fracture from impact.Metal caps are great for industrial and food applications.A metal closure is manufactured from either steel(coated with anti-corrosive coating ofeither chromeplateor tinplate) oraluminum.POLYPROPYLENE(THERMOPLASTIC)410CLOSURESCAP TECHNICALINFORMATIONPolypropylene caps are knownfor good impact strength, costeffectiveness and pliability. They canbe remelted after they are formed.Caps & Neck FinishesScrew thread cap sizes are expressed in two numbers, whichrefer to the cap diameter (in millimeters) and the GPI Finish(the top of the containers). For example, a size 28-430 caphas a diameter of 28mm, and fits a container with a 430 GPIthread finish.415425430LINER MATERIALF217 & TEFLON ® LINED CAPS - Foam backed Teflon ® PTFE liners resist attack fromvirtually all chemicals at room temperature and provides resilience for a tight seal witha low moisture transmission rate. F217 has a low density foam core between two solidlayers of LDPE. Uses include: Analytical lab samples, high purity chemicals, strongacids, solvents, environmental samples, pharmaceuticals, and diagnostic reagents.The color green easily identifies the Teflon ® liner system. Available in Thermoset andPhenolic caps.PULP/VINYL LINED CAPS - Phenolic caps with pulp and vinyl liners are perfect forgeneral use. The liner is made of a vinyl coating applied to high density polyethylenecoated paper and then it is laminated to pulpboard. This general purpose liner iscommonly used for food, beverage, medical and chemical applications packed at lessthan 120° F., including mild acids, alkalis, solvents, alcohols, oils and aqueous products;not recommended for active hydrocarbons or bleaches. Available in Phenolic caps.POLYSEAL CONE LINED CAPS - These caps form an exceptionally tight seal and offera good chemical barrier. This liner molds itself around the sealing areas of the finish asthe cap is screwed on, virtually eliminating leakage, evaporation, contamination, bindingand backing off. Great for everything from liquids, to soaps, to macro-invertebrates.Available in Phenolic caps.RUBBER LINED CAPS - Black phenolic caps with rubber liners are autoclavable. Thisliner is FDA approved for food and pharmaceutical applications. Excellent properties ofresilience, resistance to moisture vapor and relatively low gas transmission. Also widelyused for packaging injectables. Great for culture work. They also provide the mostconsistent adherence to close dimensional tolerances. Available in Phenolic caps.RUBBER BACKED/TEFLON ® FACED CAPS - Designed for the ultimate in product safety.Autoclavable PTFE provides totally inert inner seal and surface facing the sample orproduct..030 SOLID POLYETHYLENE LINED CAPS - Caps with solid PE liners offer goodchemical resistance and low moisture vapor transmission rate and is great for nail polishremover and higher concentration acids & alkalis. Good for non-oil products filled atroom temperature. Because this lining system is paperless, your samples will not becontaminated with fiber or paper particles from the closure. Available in Phenolic caps.ALUMINUM FOIL LINED CAPS - These caps are typically used for food applications.Free of odor and taste problems. Also can be used for non-acid, non-alkaline products.Great for organic solvents, chrome cleaners, brake fluids and mineral oils. Available inPhenolic and Metal caps.TIN FOIL LINED CAPS – These caps offer good chemical resistance and are typicallyused with solids and powders. Good resistance to hydro-carbons, alcohols, ketones andoils. Not recommended for acids and alkalis. Available in Phenolic caps.STURDEESEAL ® PE FOAM LINED CAPS – These polypropylene caps have excellentsealing characteristics and offer good chemical resistance including acids, alcohols,alkalis, aqueous products, cosmetics, household oils and solvents.F422 HDPE FOAM LINED CAPS – Also called Acid Caps, these polypropylene caps areacid resistant. This F422 liner is comprised of a .38” LDPE core sandwiched betweenidentical layers of .002” - .003” virgin HDPE.UNLINED CAPS - Unlined polypropylene closures are available in white or black. Thesecaps are autoclavable and are suitable for many dry products.PLASTISOL LINED CAPS - Metal caps with a Plastisol liner offer excellent resistanceto mild acids as in food products. Permits “hot fill” operations to effectively produce avacuum seal.PULP/POLYETHYLENE CAPS – These metal caps are a great general purpose closure.They are ideal for powders and non-acidic food products and consumer products suchSepta are available in a variety of styles to insure compatibility. Choose PTFE/Siliconeto resist coring and provide great resealability. These septa are available in a variety ofcolors for easy sample identification. PTFE/Silicone/PTFE septa are good for multipleinjections. These septa have PTFE resistance until punctured, then the septa will havesilicone compatibility. PTFE/Red Rubber are economical and the PTFE facing provides abarrier for product contact. Some styles available with a slit for easy penetration.SEPTA STYLE Item #26as jar candles and honey.27A. RED & WHITEBAGGED SEPTASCaseQty. Item #BULK SEPTAS8mm 0.040” PTFE/Red Rubber VS11277-122 1,000 — —9mm 0.040” PTFE/Red Rubber VS11283-222 1,000 — —8mm 0.040” Red PTFE/Silicone/Red PTFE VS11282-132 1,000 — —9mm 0.040” Red PTFE/Silicone/Red PTFE VS11285-232 1,000 — —8mm 0.045” Red PTFE/Silicone VS11279-112 1,000 — —8mm 0.065” Red PTFE/Silicone VS11280-112 1,000 — —8mm 0.075” Red PTFE/Silicone VS11281-112 1,000 — —B. NATURAL & WHITE9mm 0.040” PTFE/Silicone VS11284-212 1,000 — —8mm 0.100” PTFE/Silicone VS11278-112 1,000 — —CaseQty.24mm 0.125” Natural Teflon ® PTFE/Silicone 5Y24QYS 100 5240A 4,00022mm 0.060” White Teflon ® PTFE/Silicone CAP-05188 500 — —DISC STYLE Item #DiscsBAGGED DISCSDiscs allow you to convertordinary caps into noncontaminatingclosures at afraction of the cost. Just pressthe disc into your existingclosure. Easy to-clean. Easy toremove. Easy to replace.CaseQty. Item #BULK DISCSCaseQty.8mm 0.010” White PTFE — — VS31275-142 1,0008mm 0.010” White PTFE with Slit — — VS31274-142 1,0009mm 0.010” White PTFE — — VS31276-242 1,00022-400 0.010” Natural Teflon ® PTFE 5Y22QYD 500 5Y22BYD 1,00024-400 0.010” Natural Teflon ® PTFE 5Y24QYD 500 5Y24BYD 1,00028-400 0.010” Natural Teflon ® PTFE 5Y28QYD 500 5Y28BYD 1,00033-400 0.010” Natural Teflon ® PTFE 5Y33QYD 500 5Y33BYD 1,00033-430 0.010” Natural Teflon ® PTFE 5Y34QYD 500 5Y34BYD 1,00038-400 0.010” Natural Teflon ® PTFE 5Y38QYD 500 5Y38BYD 1,00038-430 0.010” Natural Teflon ® PTFE 5Y30QYD 500 5Y30BYD 1,00043-400 0.010” Natural Teflon ® PTFE 5Y43QYD 500 5Y43BYD 1,00045-400 0.010” Natural Teflon ® PTFE 5Y45QYD 500 5Y45BYD 1,00048-400 0.010” Natural Teflon ® PTFE 5Y48QYD 500 5Y48BYD 1,00053-400 0.010” Natural Teflon ® PTFE 5Y53QYD 500 5Y53BYD 1,00058-400 0.010” Natural Teflon ® PTFE 5Y58QYD 500 5Y58BYD 1,00063-400 0.010” Natural Teflon ® PTFE 5Y63QYD 144 — —70-400 0.010” Natural Teflon ® PTFE 5Y70QYD 144 — —83-400 0.010” Natural Teflon ® PTFE 5Y83QYD 144 — —89-400 0.010” Natural Teflon ® PTFE 5Y89QYD 144 — —ANeckFinishNeckFinish Item #White PolypropyleneFlip Top CapsCaseQty.28-400 CAP-06904 275NeckFinish Item #Black PolypropyleneGlass DropperAssemblyDropperLength mm Item #BAGGED CAPSBAGGED CAPSCaseQty. Item #BULK CAPSCaseQty. Item #SeptaCaseQty.24-410 CAP-06047 144 5037 2,60028-400 CAP-06048 144 5038 2,500BULK CAPSCaseQty.20-400 74-76 CAP-05740 12 CAP-05739 3,60020-400 86-88 CAP-05742 12 CAP-05741 2,88022-400 100-102 CAP-05744 12 CAP-05743 2,160Trigger SprayersF217 Foam PE LinedTrigger Sprayer PumpsNeckFinish Item #BAGGED CAPSCaseQty. Item #Industrial Trigger SprayerPumps with F217 GasketBULK CAPSCaseQty.28-400 CAP-06051 144 5050 500BCLOSURES