6-26 caliper1.cdr

7-PIECE MEASURING TOOL SETInclud es:1)Electronic digital caliper, range 0-150mm/0-6 ",resolution 0.01mm/0.0005", code 1112-1502)Electronic outside micrometer, range 0-25mm/0-1",resolution 0.001mm/0.00005", code 3109-253)Electronic digital indicator, range 0-10mm/0-0.5",resolution: 0.005mm/0.0005"4)Magnetic stand, magnetic force 60kgf, code 6201-605)Micrometer stand, code 63006)Depth base attachment, code 61407)Zero setting barPacked in blow mould caseCode5007-29-PIECE MEASURING TOOL SET5009-1 includ es:1)Electronic digital caliper, range 0-150mm/0-6 ", resolution 0.01mm/0.0005",code 1112-1502)Outside micrometer, range 0-25mm, graduation 0.01mm, code 3202-253)Protractor, range 0-180°, graduation 1°, code 4799-1804)Pitch gage, range 0.25-7mm, 24pcs, metric 60° thread,code 4820-1245)Radius gage, range 1-7mm, 17 concave blades and 17 convex blades,code 4801-176)Feeler gage, range 0.05-1.00mm, 20pcs, code 4602-207)90° beveled edge square, 100x70mm, code 4790-10008)Two ends scriber, length 230mm/9.1" , code 72309) Rule, 0-150mm/0-6", code 7110-1505009-1E includes:1)Electronic digital caliper, range 0-150mm/0-6", resolution 0.01mm/0.0005",code 1112-1502)Outside micrometer, range 0-1", graduation 0.0001", code 3202-13)Protractor, range 0-180°, graduation 1°, code 4799-1804)Pitch gage, range 4-42TPI, 30pcs, UNIFIED 60° thread, code 4820-2305)Radius gage, range 1/32-1/4", 15 concave blades and 15 convex blades,code 4801-15E6)Inch feeler gage, range 0.0015-0.025", 26pcs, code 4612-267)90° beveled edge square, 4x2.75", code 4790-0E48)Two ends scriber, length 230mm/9.1", code 72309)Rule, 0-150mm/0-6", code 7110-150Packed in blow mould caseCode5009-15009-1EP274