6-26 caliper1.cdr

SINE TABLECodeRoller distance(center to center)Table size4151-11576.2±0.005mm115x100mm4151-165127±0.005mm165x75mm4151-1651127±0.005mm165x125mm4151-1652127±0.005mm165x150mm4151-1653127±0.005mm165x300mm4151-200127±0.005mm200x300mm4151-300254±0.005mm300x150mm4151-3001254±0.005mm300x300mm4151-115E3 ± 0.0002"4-17/32x4"4151-165E5 ± 0.0002"6-1/2x2-15/16"4151-166E4151-167E4151-168E4151-200E4151-300E4151-301E5 ± 0.0002"5 ± 0.0002"5 ± 0.0002"5 ± 0.0002"10 ± 0.0002"10 ± 0.0002"6-1/2x5"6-1/2x6"6-1/2x12"8x12"12x6"12x12"Designed for setting and checking of precisionangles with gauge blocksAlloy steel, hardened, ground and lappedPacked in wooden boxSINE VISECodeRoller distance(center to center)Jaw openingJaw width4152-50100±0.005mm65mm50mm4152-63100±0.005mm85mm63mm4152-73150±0.0075mm100mm73mm4152-88150±0.0075mm125mm88mm4152-100200±0.01mm125mm100mm4152-125200±0.01mm160mm125mm4152-1504152-50E4152-63E4152-73E200±0.01mm4 ± 0.0002"4 ± 0.0002"6 ± 0.0003"175mm2-9/16"3-3/8"4"150mm2"2-1/2"3"Designed for setting and checking ofprecision angles with gauge blocksAlloy steel, hardened, ground and lappedPacked in wooden box4152-88E6 ± 0.0003"5"3-1/2"4152-100E8 ± 0.0004"5"4"4152-125E8 ± 0.0004"6-15/16"5"4152-150E8 ± 0.0004"6-7/8"6"P235