6-26 caliper1.cdr

ELECTRONIC V-ANVIL MICROMETER35903190CodeCodeRangeFlutes3590-1533190-1531-15mm/0.04-0.6"33590-2033190-2035-20mm/0.2-0.8"33590-3533190-35320-35mm/0.8-1.4"33590-5033190-50335-50mm/1.4-2.0"33590-6533190-65350-65mm/2.0-2.6"33590-8033590-9533590-2533590-5031Code3590-2553590-4553590-6553590-8553590-1055Code3190-8033190-9533190-2533190-5031Code3190-2553190-4553190-6553190-8553190-1055Code65-80mm/2.6-3.2"80-95mm/3.2-3.8"2.3-25mm/0.09-1"25-50mm/1-2”Range5-25mm/0.2-1.0"25-45mm/1.0-1.8"45-65mm/1.8-2.6"65-85mm/2.6-3.4"85-105mm/3.4-4.2”Range3333Flutes55555FlutesResolution: 0.001mm/0.00005"Measure the outside diameter of cutting heads(such as taps, reamers, end mills) with odd number of flutesButtons: on/off, data set, mm /in,ABS/INC, data outputIP54 protectionSR44 battery, with one spare battery, auto power offRS232 output, 3590 is supplied with data output cableCarbide tipWith battery cover wrenchSupplied with standard rodsPacked in plastic box or wooden box3590-2573190-2575-25mm/0.2-1.0"73590-4573190-45725-45mm/1.0-1.8"73590-6573190-65745-65mm/1.8-2.6"73590-8573190-85765-85mm/2.6-3.4”7P85