6-26 caliper1.cdr

BLADE MICROMETERCode3232-253232-503232-753232-1003232-1253232-1503232-175Range0-25mm25-50mm50-75mm75-100mm100-125mm125-150mm150-175mmCode3232-13232-23232-33232-43232-53232-63232-7Range0-1"1-2"2-3"3-4"4-5"5-6"6-7"Graduation: metric 0.01mminch 0.0001"The anvil and spindle have blade tips to measure thegroove diameter of shafts and keywaysBlade tip: thickness x width x length=0.75x6x6.5mm( 0.030x0.236x0.256")Non-rotating spindle,ratchet stopWith zero adjusting wrenchSupplied with standard rodsPacked in plastic box or wooden boxELECTRONIC BLADE MICROMETER31323532Code3532-253532-503532-753532-1003532-1253532-1503532-175Code3132-253132-503132-753132-1003132-1253132-1503132-175Range0-25mm/0-1"25-50mm/1-2"50-75mm/2-3"75-100mm/3-4"100-125mm/4-5"125-150mm/5-6"150-175mm/6-7"Resolution: 0.001mm/0.00005"The anvil and spindle have blade tips to measurethe groove diameter of shafts and keywaysBlade tip: thickness x width x length=0.75x6x6.5mm( 0.030x0.236x0.256")Buttons: on/off, data set, mm/in, ABS/INC, data outputSR44 battery, with one spare battery, auto power offRS 232 output, 3532 is supplied with data output cableNon-rotating spindleWith battery cover wrenchSupplied with standard rodsPacked in plastic box or wooden boxP67