12.07.2015 Views

Base Station Antenna Systems 2008 Product Selection Guide - AVW

Base Station Antenna Systems 2008 Product Selection Guide - AVW

Base Station Antenna Systems 2008 Product Selection Guide - AVW

SHOW MORE
SHOW LESS
  • No tags were found...

You also want an ePaper? Increase the reach of your titles

YUMPU automatically turns print PDFs into web optimized ePapers that Google loves.

Teletilt ® Remote Electrical Downtilt SystemRET Installation AccessoriesAWE-A12 WeatherShield WeatherproofingComplete your transmission line installation with Andrew’s new AWE-A12 WeatherShield connection protection enclosure, which seals and protects connectors from the environment.This robust, one-piece weatherproofing enclosure offers an additional measure of system protectionby providing a high temperature resistant, watertight seal around the connectors while also helpingto dampen vibration that can loosen connector interfaces over time.The reusable enclosure contains an innovative trifold seal that provides complete moisture blockfor installed connectors. The ease of installation on hard-to-reach connections and the long-termprotection provided by this enclosure make it the most cost-effective solution available today. TheAWE-A12 WeatherShield connection protection enclosure takes just seconds to install. Simply placethe housing around the connector and snap the tabs together.No tapes, tools, or shrink tubes are required. The Andrew AWE-A12 WeatherShield connectionprotection enclosure will accommodate Type N and 7–16 DIN connections and is compatible withAndrew HELIAX ® cable, SureFlex cable assemblies, as well as most brands of standard jumpers.Part NumberAWE-A12DescriptionEnclosure for 0.5 in antenna connection/device AWE-A12Hoisting Grip for RET CableLift and support RET cable up a tower safely and quickly, without the threat of slippage usingAndrew’s new 3CCGRIP hoisting grip. This one-piece grip speeds and simplifies installation byeliminating time consuming lacing. Recommended for use at 200 ft (60 m) intervals.Part Number3CCGRIPDescriptionHoisting grip for RET control cablesNylon Cable Tie For RET Cable AttachmentNylon cable ties provide support for RET cables. Typical applications include securing cables inbuildings and along horizontal antenna mounting arms.Part NumberDescription40417 Nylon cable ties, 0.3125 in (8 mm) wide 14.5 in (368 mm) long, kit of 50 3CCGRIP 40417Andrew Wireless Solutions www.andrew.com91

Hooray! Your file is uploaded and ready to be published.

Saved successfully!

Ooh no, something went wrong!