Base Station Antenna Systems 2008 Product Selection Guide - AVW
Share Embed Flag
Download ePaper

Base Station Antenna Systems 2008 Product Selection Guide - AVW

Base Station Antenna Systems 2008 Product Selection Guide - AVW Base Station Antenna Systems 2008 Product Selection Guide - AVW

avw.co.nz
12.07.2015 Views

Teletilt ® Remote Electrical Downtilt SystemSurge ArrestorsAPTDC-BDFDF-DB and APTDC-BDFDM-DB Arrestor Plus ® Surge ArrestorsAPTDC series surge arrestors protect RET site components in the BTS from damage due to lightningstrikes or power surges. The APTDC-BDFDF-DB and APTDC-BDFDM-DB surge arrestors are alsodesigned to allow AISG signals to pass through the coaxial cable to a top smart bias tee or AISGtower mounted amplifier. These surge arrestors can be used with a dc 2.1 bias tee or a smart biastee located at the bottom of the tower.ElectricalModel APTDC-BDFDF-DB APTDC-BDFDM-DBRegulatory compliance AISG Compliant AISG CompliantFrequency range 806–960 and 1710–2170 MHz 806–960 and 1710–2170 MHzReturn loss1.0–5.0 MHz 22.0 dB 22.0 dB2.0–2.3 MHz 25.0 dB 25.0 dB806–960 MHz 26.0 dB 24.0 dB1710–2000 MHz 26.0 dB 24.0 dB2000–2170 MHz 26.0 dB 24.0 dBIntermodulation –150 dBc (3rd order; 2 x 20 W) –150 dBc (3rd order; 2 x 20 W)Average power 3000 W 3000 WConnector impedance 50 ohms 50 ohmsGas tube voltage 350 V 350 VLightning strike capability 10 times @ 30 kA, 8/20 waveform 10 times @ 30 kA, 8/20 waveformLightning strike capability test method IEEE C62.42-1991 IEEE C62.42-1991Peak power, maximum 40 kW 40 kWInsertion loss, typical 0.05 dB 0.07 dBInterface 1 Interface 2 APTDC-BDFDF-DBMechanicalInterface 1 7-16 DIN female bulkhead 7-16 DIN female bulkheadInterface 2 7-16 DIN female 7-16 DIN maleWeight 0.64 kg (1.41 lb) 0.60 kg (1.32 lb)Height 81.03 mm (3.19 in) 87.88 mm (3.46 in)Length 87.88 mm (3.46 in) 87.88 mm (3.46 in)Width 41.91 mm (1.65 in) 41.91 mm (1.65 in)All specifications are subject to change. Please see www.andrew.com for the most current information.Andrew Wireless Solutions www.andrew.com85

Teletilt ® Remote Electrical Downtilt SystemCoaxial Cable for SMA to SMB ConnectionC100-PSMSB-M8The Andrew C100-PSMSB-M8 braided coaxial cable provides a connection between an SMB porton the ATC300-1000 Teletilt controller and the SMA port of an ABT series dc 2.1 bias tee. Pleasecontact Andrew Wireless Solutions for additional lengths.ElectricalModelC100-PSMSB-M8Cable construction typeCNT-100 braided coaxial, black jacketConnector typeSMB, maleImpedance50 ohmsInsertion loss (typical), 824–960 MHz 0.95 dBInsertion loss (typical), 1910–2170 MHz 1.35 dB C100-PSMSB-M8MechanicalDimensions, LBending radiusTorque, normalTorque, waterproofOperating temperature range0.8 m6.4 mm0.8–1.1 Nm1.7 Nm–40° C to +85° CAll specifications are subject to change. Please see www.andrew.com for the most current information.86Andrew Wireless Solutions www.andrew.com

Teletilt ® Remote Electrical Downtilt SystemCoaxial Cable for SMA to SMB ConnectionC100-PSMSB-M8The Andrew C100-PSMSB-M8 braided coaxial cable provides a connection between an SMB porton the ATC300-1000 Teletilt controller and the SMA port of an ABT series dc 2.1 bias tee. Pleasecontact Andrew Wireless Solutions for additional lengths.ElectricalModelC100-PSMSB-M8Cable construction typeCNT-100 braided coaxial, black jacketConnector typeSMB, maleImpedance50 ohmsInsertion loss (typical), 824–960 MHz 0.95 dBInsertion loss (typical), 1910–2170 MHz 1.35 dB C100-PSMSB-M8MechanicalDimensions, LBending radiusTorque, normalTorque, waterproofOperating temperature range0.8 m6.4 mm0.8–1.1 Nm1.7 Nm–40° C to +85° CAll specifications are subject to change. Please see www.andrew.com for the most current information.86Andrew Wireless Solutions www.andrew.com

logo

products

Resources

Company

Terms of service
Privacy policy
Cookie policy
Cookie settings
Imprint
Change language
Made with love in Switzerland
© 2024 Yumpu.com all rights reserved

Hooray! Your file is uploaded and ready to be published.

Saved successfully!

Ooh no, something went wrong!