Base Station Antenna Systems 2008 Product Selection Guide - AVW
Base Station Antenna Systems 2008 Product Selection Guide - AVW Base Station Antenna Systems 2008 Product Selection Guide - AVW
Teletilt ® Remote Electrical Downtilt SystemGrounding KitsTeletilt ® 602299 RET Component Grounding KitRecommended for use with RET system equipment to provide protection against lightning damage.Part NumberDescription602299 RET component grounding kitIncludes1 Ground cable (#6 AWG with lugs), 2 ft (610 mm)4 Spacers3 M10 split lockwashers1 12 in rubber mastic tape (black butyl)1 DEHN grounding clamp #390 259 stainless steel2 M10 x 1.5, 25 mm long, hex head cap screws2 M10 hex nuts1 Electrical tape1 Installation bulletin 602299Provides lightning protection for Teletilt ® RET equipmentAndrew Wireless Solutions www.andrew.com77
Teletilt ® Remote Electrical Downtilt SystemRET System With Smart Bias TeesInstead of a home run control cable up the height of a tower or building, the AISG signals can beinjected (piggy-backed) into the existing RF cable by using smart bias tees. For this to be done, asmart bias tee is installed at the bottom of the antenna line devices and modulates the AISG signalsinto the RF cable.There are two options that can be used for dividing out the AISG signal from the RF cable intocontrol cables leading to the antenna line devices at the top of the site. One option is to use asecond smart bias tee at the top. The AISG port on that smart bias tee can be connected to ajunction box, actuator, or any other RET device. A second option is to use an AISG tower mountedamplifier (TMA), which also has an AISG port for connecting to any RET devices.RET System Using AISG Port on ATC300-1000 with Either Smart Bias Tees oran AISG TMA at the TopSmart Bias TeeOptionTMAOptionAntennaSmart Bias TeeAISGTMAActuatorAISGControlCableAISGUSBCoaxialCable~ ~ ~ ~ ~ATC200-LITE-USBPortable ControllerorATC300-1000ControllerLightningProtection UnitCrossoverEthernetCableorNetworkAISG ConnectorBTS(Computer interface not supplied.)78Andrew Wireless Solutions www.andrew.com
- Page 27 and 28: 1800/1900/UMTS1710-2180 MHz80-95°
- Page 29 and 30: 1800/1900/UMTS1850-1990 MHz60-75°
- Page 31 and 32: 1800/1900/UMTS1850-1990 MHz80-95°
- Page 33 and 34: 1800/1900/UMTS1920-2180 MHz80-95°
- Page 35 and 36: Notes34Andrew Wireless Solutions w
- Page 37 and 38: 700/800/900 MHzFeatures and Benefit
- Page 39 and 40: 700/800/900 MHzSingle Band Sector B
- Page 41 and 42: 700/800/900 MHz806-896 MHz30 30 30
- Page 43 and 44: 700/800/900 MHz806-896 MHz80-95° H
- Page 45 and 46: 700/800/900 MHz806-960 MHz80-95° H
- Page 47 and 48: 700/800/900 MHz870-960 MHz60-75° H
- Page 49 and 50: Notes48Andrew Wireless Solutions w
- Page 51 and 52: WiMAXFeatures and BenefitsSector An
- Page 53 and 54: WiMAXSingle Band Sector Base Statio
- Page 55 and 56: Notes54Andrew Wireless Solutions w
- Page 57 and 58: 30-512 MHzFeatures and BenefitsGrou
- Page 59 and 60: 30-512 MHz30-174 MHz60-75° Horizon
- Page 61 and 62: 30-512 MHz406-512 MHz60-75° Horizo
- Page 63 and 64: Teletilt ® Remote Electrical Downt
- Page 65 and 66: Teletilt ® Remote Electrical Downt
- Page 67 and 68: Teletilt ® Remote Electrical Downt
- Page 69 and 70: Teletilt ® Remote Electrical Downt
- Page 71 and 72: Teletilt ® Remote Electrical Downt
- Page 73 and 74: Teletilt ® Remote Electrical Downt
- Page 75 and 76: Teletilt ® Remote Electrical Downt
- Page 77: Teletilt ® Remote Electrical Downt
- Page 81 and 82: Teletilt ® Remote Electrical Downt
- Page 83 and 84: Teletilt ® Remote Electrical Downt
- Page 85 and 86: Teletilt ® Remote Electrical Downt
- Page 87 and 88: Teletilt ® Remote Electrical Downt
- Page 89 and 90: Teletilt ® Remote Electrical Downt
- Page 91 and 92: Teletilt ® Remote Electrical Downt
- Page 93 and 94: Teletilt ® Remote Electrical Downt
- Page 95 and 96: Notes94Andrew Wireless Solutions w
- Page 97 and 98: Concealment SolutionsOverview Micro
- Page 99 and 100: Concealment SolutionsMicro AcCELLer
- Page 101 and 102: Concealment SolutionsAntenna Concea
- Page 103 and 104: Concealment SolutionsAntenna Concea
- Page 105 and 106: Mounting Hardware and AccessoriesFo
- Page 107 and 108: Mounting Hardware and AccessoriesFo
- Page 109 and 110: Mounting Hardware and AccessoriesFo
- Page 111 and 112: Mounting Hardware and AccessoriesFo
- Page 113 and 114: Mounting Hardware and AccessoriesFo
- Page 115 and 116: Applications/Engineering NotesOverv
- Page 117 and 118: Applications/Engineering NotesBasic
- Page 119 and 120: Applications/Engineering NotesAnten
- Page 121 and 122: Applications/Engineering NotesAnten
- Page 123 and 124: Applications/Engineering NotesAnten
- Page 125 and 126: Applications/Engineering NotesAnten
- Page 127 and 128: Applications/Engineering NotesAnten
Teletilt ® Remote Electrical Downtilt SystemRET System With Smart Bias TeesInstead of a home run control cable up the height of a tower or building, the AISG signals can beinjected (piggy-backed) into the existing RF cable by using smart bias tees. For this to be done, asmart bias tee is installed at the bottom of the antenna line devices and modulates the AISG signalsinto the RF cable.There are two options that can be used for dividing out the AISG signal from the RF cable intocontrol cables leading to the antenna line devices at the top of the site. One option is to use asecond smart bias tee at the top. The AISG port on that smart bias tee can be connected to ajunction box, actuator, or any other RET device. A second option is to use an AISG tower mountedamplifier (TMA), which also has an AISG port for connecting to any RET devices.RET System Using AISG Port on ATC300-1000 with Either Smart Bias Tees oran AISG TMA at the TopSmart Bias TeeOptionTMAOption<strong>Antenna</strong>Smart Bias TeeAISGTMAActuatorAISGControlCableAISGUSBCoaxialCable~ ~ ~ ~ ~ATC200-LITE-USBPortable ControllerorATC300-1000ControllerLightningProtection UnitCrossoverEthernetCableorNetworkAISG ConnectorBTS(Computer interface not supplied.)78Andrew Wireless Solutions www.andrew.com