Base Station Antenna Systems 2008 Product Selection Guide - AVW
Share Embed Flag
Download ePaper

Base Station Antenna Systems 2008 Product Selection Guide - AVW

Base Station Antenna Systems 2008 Product Selection Guide - AVW Base Station Antenna Systems 2008 Product Selection Guide - AVW

avw.co.nz
12.07.2015 Views

Teletilt ® Remote Electrical Downtilt SystemControllersElectricalPower supplyInput110/240 VacOutput2.5 A at 24 VdcApprovalsPower converterUL, CE, FCCInterface CE, CB IC 60950-1:2001Connectors/InterfacesComputer interfaceUSBSerialPower supply interfaceAISG interfaceCable connects to controller and USB port on PCRS-232 9-pin D cable assembly connects between adapter and PCdc jack, 3.0A maximum8-pin DIN style, female, IP67, data and powerMechanical/EnvironmentalNet weight0.9 lb (0.4 kg)Shipping weight4.85 lb (2.22 kg)DimensionsProduct—L x W x D5 x 3 x 2 in (127 x 76 x 51 mm)Shipping—L x W x D12.625 x 8.75 x 2.5 in (321 x 222 x 64 mm)Housing materialAluminumHousing colorGray; yellow casingTemperature range–40° C to +55° C, portable indoor useHumidityUp to 95% non-condensingAll specifications are subject to change. Please see www.andrew.com for the most current information.Andrew Wireless Solutions www.andrew.com69

Teletilt ® Remote Electrical Downtilt SystemJunction BoxesTeletilt ® ATJB200-A01 Series Junction BoxesThe ATJB200-A01-004 (4-way) and ATJB200-A01-007 (7-way) junction boxes serve as a hubto connect up to 32 actuators to a Teletilt controller and provide lightning protection. Variousconfigurations can be achieved to reduce the number of RET control cables needed to provide dataand power service to the RET devices on a site.The 4-way model is equipped with four female output ports and the 7-way model is equipped withseven female output ports. Both models are equipped with one male input port. Mounting bracketsare included with both models to allow these units to be mounted to either a pole or to a flat surface.Grounding is required; therefore a grounding cable is also included in each junction box. ATJB200-A01-004Part NumberATJB200-A01-004ATJB200-A01-007IncludesDescription4-way junction box7-way junction box1 Junction box1 Pipe bracket1 Band clamp2 Wall brackets2 M8 carriage bolts, stainless steel, 25 mm long2 M8 hex nuts, stainless steel2 M8 lock washers, stainless steel1 Ground cable (#6 AWG with lugs), 2 ft (610 mm)1 Installation bulletin ATJB200-A01-007Divides data and power on main RET cable from ATC200series control units to additional junction boxes orATM200 series actuators70Andrew Wireless Solutions www.andrew.com

Teletilt ® Remote Electrical Downtilt SystemControllersElectricalPower supplyInput110/240 VacOutput2.5 A at 24 VdcApprovalsPower converterUL, CE, FCCInterface CE, CB IC 60950-1:2001Connectors/InterfacesComputer interfaceUSBSerialPower supply interfaceAISG interfaceCable connects to controller and USB port on PCRS-232 9-pin D cable assembly connects between adapter and PCdc jack, 3.0A maximum8-pin DIN style, female, IP67, data and powerMechanical/EnvironmentalNet weight0.9 lb (0.4 kg)Shipping weight4.85 lb (2.22 kg)Dimensions<strong>Product</strong>—L x W x D5 x 3 x 2 in (127 x 76 x 51 mm)Shipping—L x W x D12.625 x 8.75 x 2.5 in (321 x 222 x 64 mm)Housing materialAluminumHousing colorGray; yellow casingTemperature range–40° C to +55° C, portable indoor useHumidityUp to 95% non-condensingAll specifications are subject to change. Please see www.andrew.com for the most current information.Andrew Wireless Solutions www.andrew.com69

logo

products

Resources

Company

Terms of service
Privacy policy
Cookie policy
Cookie settings
Imprint
Change language
Made with love in Switzerland
© 2024 Yumpu.com all rights reserved

Hooray! Your file is uploaded and ready to be published.

Saved successfully!

Ooh no, something went wrong!