Base Station Antenna Systems 2008 Product Selection Guide - AVW
Share Embed Flag
Download ePaper

Base Station Antenna Systems 2008 Product Selection Guide - AVW

Base Station Antenna Systems 2008 Product Selection Guide - AVW Base Station Antenna Systems 2008 Product Selection Guide - AVW

avw.co.nz
12.07.2015 Views

Teletilt ® Remote Electrical Downtilt SystemActuatorTeletilt ® ATM200-002 ActuatorThe AISG-compliant ATM200-002 actuator engages the antenna downtilt rod for electricaldowntilt modifications as it receives tilt commands from either the ATC300-1000 rack mount orthe ATC200-LITE-USB portable controller. The controller also configures the actuator to store sectorposition, height, antenna type, as well as other parameters.This actuator can be field fitted onto Andrew Teletilt RET compatible antennas that are already inservice or factory fitted before delivery to the field.With more than 200,000 actuators in service, Andrew’s ATM200-002 actuator is a proven, reliableRET solution. Absolute position sensor eliminates calibration, enhances precision, and prevents dropped callscaused by calibration sweeps An LED flashes to indicate that the actuator is changing tilt Extensively tested and certified to contain EMI/EMC emissions, including operation near 50/60 Hzpower lines Male and female AISG connectors facilitate daisy chaining actuators Operates in either AISG 1.1 or 2.0 modeElectricalAdjustment time10,000Power input10–30 Vdc, compliant with AISG standardResolution tolerance± 0.1° per AISG specInternal lightning protectionProtection rating (all lines to ground):IEC 61312-1 annex B current pulse profile, 10/350 μs,10 repetitions minimum at 600 AEU certificationCE, CB low voltage directive 73/23/EECEMC/Surge immunityETSI EN 300 386–V1.3.2 2003 with EN 55022 1998 schedule forclass A device; GR 1089 core issue 3;FCC CFR 47 part 15 subpart B for class A; EN 61326-1, EN 55011Safety standard EN 60950, UL 60950 ATM200-002The fully AISG 2.0 compliant ATM200-002 connectsto the electrical downtilt adjustment rod of a basestation antenna to allow remote control downtiltConnectors/InterfacesInput portOutput portLogical interfaceOne AISG 8-pin male, IP67, data and powerOne AISG 8-pin female, IP67, data and powerUser menu driven commands from ATC200 controller unitMechanical/EnvironmentalNet weight0.53 lb (0.24 kg)Shipping weight0.65 lb (0.3 kg)DimensionsProduct—L x W x D8 x 2.75 x 2.75 in (203 x 70 x 70 mm)Shipping—L x W x D9.5 x 2.5 x 2.5 in (241.3 x 63.5 x 63.5 mm)Housing materialDurable ABSHousing colorBlackMaximum wind speed125 mph (201 km/h)Temperature range–40° C to +70° CHumidity Up to 100%IP ratingIP65All specifications are subject to change. Please see www.andrew.com for the most current information.Andrew Wireless Solutions www.andrew.com65

Teletilt ® Remote Electrical Downtilt SystemControllersTeletilt ® ATC300-1000 Rack Mount ControllerThe ATC300-1000 controller serves as an interface between a PC or Network Control Center andremote electrical downtilt (RET) devices installed at a base station site.This unit is equipped with an Ethernet port, as well as a 9-pin ‘D’ style RS-232 port. Either typeof connection provides direct access to a local computer, whereas the Ethernet port allows remoteaccess over a network or Internet connection. The controller interface is easily accessed through anInternet browser.The ATC300-1000 Teletilt controller is uniquely designed to provide both AISG and SMB connections onthe same unit. This controller supports up to 32 AISG antenna line device connections (e.g. actuatorsand TMAs). The SMB ports (layer one converter outputs) offer an alternative connection to transmit theAISG signals through a lower priced dc 2.1 bias tee. The ATC300-1000 is also capable of supportingnew concept antennas, such as the Andrew SmartBeam antenna models with three types ofadjustments that can be made (horizontal beamwidth, azimuth boresite, and electrical downtilt).The ATC300-1000 controller can be mounted in a 19 in rack (only 1 rack unit), usually enclosed inan equipment cabin. When the controller is used in an outdoor environment, it must be placed in aweatherproof enclosure.As a complimentary package, ANMS Site Manager software is provided with the purchase ofAndrew’s ATC300-1000 controller. This Antenna Network Management System (ANMS) programallows access to RET sites across the world to be managed over an Ethernet connection from anynetwork center. With ANMS Site Manager, you have instant visual feedback of your entire network.Adjustments can be easily made to accommodate changing coverage needs to numerous RET sitesat the same time without visiting the site.Part NumberATC300-1000IncludesDescriptionRack mount controller1 Antenna system control unit1 Ethernet crossover cable1 RS-232 serial cable1 Phoenix 48 V connector, female1 Phoenix 24 V connector, female*2 Quick reference guides (User guide available online.)*1 Site configuration worksheet (For pads of 50 worksheets, order ATFK-Config Pad.)*Available at www.andrew.com. ATC300-1000Communicates control signals from the bottom of the tower’s base station to adjust the antenna’s electrical tiltVisit www.andrew.com to register and receive software updates66Andrew Wireless Solutions www.andrew.com

Teletilt ® Remote Electrical Downtilt SystemActuatorTeletilt ® ATM200-002 ActuatorThe AISG-compliant ATM200-002 actuator engages the antenna downtilt rod for electricaldowntilt modifications as it receives tilt commands from either the ATC300-1000 rack mount orthe ATC200-LITE-USB portable controller. The controller also configures the actuator to store sectorposition, height, antenna type, as well as other parameters.This actuator can be field fitted onto Andrew Teletilt RET compatible antennas that are already inservice or factory fitted before delivery to the field.With more than 200,000 actuators in service, Andrew’s ATM200-002 actuator is a proven, reliableRET solution. Absolute position sensor eliminates calibration, enhances precision, and prevents dropped callscaused by calibration sweeps An LED flashes to indicate that the actuator is changing tilt Extensively tested and certified to contain EMI/EMC emissions, including operation near 50/60 Hzpower lines Male and female AISG connectors facilitate daisy chaining actuators Operates in either AISG 1.1 or 2.0 modeElectricalAdjustment time10,000Power input10–30 Vdc, compliant with AISG standardResolution tolerance± 0.1° per AISG specInternal lightning protectionProtection rating (all lines to ground):IEC 61312-1 annex B current pulse profile, 10/350 μs,10 repetitions minimum at 600 AEU certificationCE, CB low voltage directive 73/23/EECEMC/Surge immunityETSI EN 300 386–V1.3.2 2003 with EN 55022 1998 schedule forclass A device; GR 1089 core issue 3;FCC CFR 47 part 15 subpart B for class A; EN 61326-1, EN 55011Safety standard EN 60950, UL 60950 ATM200-002The fully AISG 2.0 compliant ATM200-002 connectsto the electrical downtilt adjustment rod of a basestation antenna to allow remote control downtiltConnectors/InterfacesInput portOutput portLogical interfaceOne AISG 8-pin male, IP67, data and powerOne AISG 8-pin female, IP67, data and powerUser menu driven commands from ATC200 controller unitMechanical/EnvironmentalNet weight0.53 lb (0.24 kg)Shipping weight0.65 lb (0.3 kg)Dimensions<strong>Product</strong>—L x W x D8 x 2.75 x 2.75 in (203 x 70 x 70 mm)Shipping—L x W x D9.5 x 2.5 x 2.5 in (241.3 x 63.5 x 63.5 mm)Housing materialDurable ABSHousing colorBlackMaximum wind speed125 mph (201 km/h)Temperature range–40° C to +70° CHumidity Up to 100%IP ratingIP65All specifications are subject to change. Please see www.andrew.com for the most current information.Andrew Wireless Solutions www.andrew.com65

logo

products

Resources

Company

Terms of service
Privacy policy
Cookie policy
Cookie settings
Imprint
Change language
Made with love in Switzerland
© 2024 Yumpu.com all rights reserved

Hooray! Your file is uploaded and ready to be published.

Saved successfully!

Ooh no, something went wrong!