70/140H-8 Series (2310KB) - TAIYO

Switch List
Kind
Contact
No contact
7/14 MPa double acting hydraulic cylinder
Switch
symbol
AF AX101
AG AX105
AH AX111
AJ AX115
AE AX125
AK AX11A
AL AX11B
5 WR505
7 WR505F
6 WR515
● General purpose type
AX type switch
Cord type Connector type
Mounting type
Load voltage
range
DC5-30V
AC5-120V
AC5-120V
DC5-30V
DC5-50V
AC5-120V
Load current
range
DC: 5-40mA
AC: 5-20mA
5-20mA
5-40mA
DC3-40mA
AC3-20mA
Maximum open/
close capacity
DC: 1.5W
AC: 2VA
2VA
1.5W
DC: 1.5W
AC: 2VA
● Cutting fluid proof type
WR • WS type switch
Protective
circuit
None
Present
Indicating
lamp
LED
(red light lights
up during ON)
None None
Present
None
LED
(red light lights
up during ON)
LED
(red light lights
up during ON)
70/140H-8
•For the switch symbol 11 , pay attention to the points below when
ordering the cutting fluid proof type switches, WR and WS types.
5 WR505
2 WS215
7 WR505F
4 WS215F
Wiring method
0.3mm 2 2-core,
outside diameter φ4mm
Rear wiring
4-pin connector type
Rear wiring
0.3mm 2 2-core,
outside diameter φ4mm
Rear wiring
Code
length
1.5m
5m
1.5m
5m
5m
0.5m
0.5m
5m
5m
5m
Applicable
load device
Small
relay
programmable
controller
S SR405
5m
BE AX201
1.5m
BF AX205
CE AX211
CF AX215
–
0.3mm
5m
1.5m
5m
Small
relay
program-
2
4
WS215
WS215F
LED
(2-lamp type in
red/green)
5m
5m
mable
controller
3 WS225
5m
Notes) ● For the switches without a protective circuit, be sure to provide the protective circuit (SK-100) with load devices when using induction load devices (relay, etc.).
● For the handling of switches, be sure to refer to the switch specifications in the end of this catalogue.
● All the AX type switches can be mounted. For the types other than the above, refer to the switch specifications in the end of this catalogue.
● The WR and WS type switches are cutting fluid proof type.
● SR405 switch can be used for only bore size φ32~φ125.
● We have developed CE conformed switches. Please refer to the end of a book for detailed information.
● We recommend AND UNIT (AU series) for multiple switches connected in series.
2 Neon lamp 0.5mm
AC80-220V 2-300mA 30VA Present (lamp lights up
during OFF)
LED
DC5-30V 5-40mA
Present
(red light lights
up during ON)
LED
(2-lamp type in
red/green)
2-core,
outside diameter φ4mm
DC10-30V 6-70mA –
Present
Rear wiring
2 2-core,
outside diameter φ6mm
Rear wiring
SD SD type (Basic type)
DC30V or less
AC120V or less
LA LA type (Side lugs mounting)
LB LB type (End angles mounting)
(for 7MPa)
DC40mA or less
AC20mA or less
FA FA type (head rectangular flange mounting)
(for 7MPa) (for Rod B•C)
FB FB type (cap rectangular flange mounting)
(for 7MPa) (for Rod B•C)
FY FY type (head rectangular flange mounting)
FE FE type (for Rod A)
FC FC type (head square flange mounting)
(for Rod B•C)
FD FD type (cap square flange mounting)
(for Rod B•C)
FK FK type (Intermidiate flange mounting)
The switch and straight box connector (F-SB)
are combined [the flex tube (F-05: 4.8 m) is required].
The flex tube (F-05: 4.8 m) is attached to the
switch and straight box connector (F-SB).
CS CS type (With spherical bearing)
CB CB type (Clevis mounting)
Clevis mounting in old JIS standards
TA TA type (head trunnion mounting)
LC LC type (End angles mounting) FZ FZ type (cap rectangular flange mounting) CA CA type (Eye mounting)
Cap eye mounting in old JIS standards
TC TC type (intermediate trunnion mounting)
Note) The mounting type of the 7 MPa type cannot be used basically with the pressure exceeding 7 MPa. For the using method, contact us.
44
General purpose hydraulic cylinder