EMI Filter Transient - Amphenol Aerospace

EMI/Transient ProtectionSpecialsSealed ConnectorsHermetic & High Speed Hermetic:Features and Benefits:• Leak rate of 1X10-7 cc of He/sec or less• Utilizes fused glass insert in a steel shell• Approximately 1/2 inch longer thanstandard seriesAquacon:Features and Benefits:• Underwater Use• Hermetically Sealed-Moisture/OilResistant 1500 PSI capabilityAmphenolAerospace• Filter and Transient protectionintegration available.• Hermetically sealed High Speed ContactsavailableFor more information see pages 140-142• Leak rate of 1X10-7 cc of He/sec or less• Utilizes fused glass insert in a steel shellFor more information see the Aquaconsection of this catalog.38999IIIHDDualokIIISJTAccessoriesAquaconHerm/SealPCBNew/FeaturedEpoxy Sealed Connectors:Features and Benefits:• Light weight alternative to glass sealedhermetic connector• Leak rate of 1x10-5 cc of He/sec leak ratemaintained after temperaturecycling, 5 cycles -55 to +125°CSealed Receptacles withCrimp Contact:Features and Benefits:• Leak rate of 1x10-5 cc of He/sec leak ratemaintained after temperature cycling, 5cycles -55 to +125°CPrinted Circuit Board Mount:Features and Benefits:• Allows mounting directly to a PC board,Flex circuit, and header connector• Available in Composite andAluminum shellsHeader for Flex Printed orPC Board:Features and Benefits:• Circular and rectangular• Provides easy separation of the connectorfrom the PC board or flex• Available in standard and customconfigurations.• Available in virtually all majorMIL-SPEC circular connectorsFor more information see pages 140-142.• Allows quick and reliable termination usingstandard M39029/57 socket contacts.• Intermateable & inter-mountable withstandard 38999 Series III plugs.For more information see pages 141-142.Printed Circuit Board MountPress Fit Connectors:Features and Benefits:• Solderless mounting on printed circuitboards• High speed• Low costComposite:Features and Benefits:• Meets MIL-DTL-38999, Series IIIdimensional lengths• Offers same high performance as its metalcounterpart• Lightweight: 17%-70% weight savingsNew/Featured• Elimination of soldering thermal stress• No cold soldered joints• No short circuits• No cleaning of excess flux• Optional contact for piercing conformalboard coating is available.For more information see page 557• Improved reliability by elimination ofexternal spacers and washers• Stand-off shells available in differentconfigurationsFor more information see page 286, 287, 292,293, 306, 309• Cost savings in the manufacturing process• Assemblies can be vapor phase or wavesoldered to flex/printed circuit board• Eliminates possible damage to yourexpensive filter ,TVS protected connectors,or Printed Circuit BoardsFor more information see page 120, 121Weight Savingover metal• Corrosion Resistant• Offers better environmental performancethan its metal counterpart• Durable- 1500 coupling minimumSee FCTV Composites on pages 284-287HighSpeedFiberOpticsContactsConnectorsCablesEMI FilterTransient26482Matrix 283723 IIIMatrix|Pyle26500Pyle5015Crimp RearReleaseMatrix22992Class LBack-ShellsOptionsOthersContact Amphenol Aerospace for more information at 800-678-0141 or Filterapps@amphenol-aao.com • www.amphenol-aerospace.com 273