HX8347-D - Mikrocontroller.net

HX8347-D(T)240RGB x 320 dot, 262K color, TFT Mobile Single Chip DriverExample:(1) PLTON = ‘1’,DATA SHEET Preliminary V01(2) PSL [15:0] =11 DEC , PEL [15:0] =130 DEC , MADCTL’s B4(ML)=’0’ (SMY = ‘L’).Physical 0, 0 Point*-- 123456789 --**-- ABCDEFG --*0011130Panel Scan DirectionNon- display Area*-- 123456789--*Non- display Area0320 320320Content of GRAMDisplay PanelFigure 6. 5 Partial Display Area Setting (ML=’0’)Example:(1) PLTON = ‘1’,(2) PSL [15:0] =11 DEC , PEL [15:0] =130 DEC , MADCTL’s B4(ML)=’1’ (SMY = ‘L’).Physical 0, 0 Point3190*--123456789 --**--ABCDEFG --*Content of GRAM319130110Non- display Area*--ABCDEFG----*Non- display AreaDisplay PanelFigure 6. 6 Partial Display Area Setting (ML=’1’)The refresh gate scan cycle in the rest display area of the screen (non-display area) can bespecified by ISC[3:0] bits. The scan cycle is set to an odd number from 0~13.The polarity isinverted every scan cycle.319ISC3 ISC2 ISC1 ISC0 Scan Cycle f FLM = 60Hz0 0 0 0 1 frame 17ms0 0 0 1 5 frames 84ms0 0 1 0 9 frames 150ms: : : : :1 1 0 1 53 frames 880ms1 1 1 0 57 frames 946ms1 1 1 1 Setting Inhibited -Table 6. 1 ISC [3:0] Bits DefinitionThe rest display area (non-display area) will be the white display if the type of LCD is normallywhite (REV_panel = “0”) and will be the black display if the type of LCD is normally black(REV_panel = “1”) in refresh gate scan cycle.Himax ConfidentialThis information contained herein is the exclusive property of Himax and shall not be distributed, reproduced, or disclosedin whole or in part without prior written permission of Himax.-P.63-March, 2009