Axia Preisliste 1. November 2011 - bei Thum + Mahr!

Beschreibung Part Nummer Key Einzelpreis
Radius Console Components
Radius 8-Fader Console System NEW
The new Radius console is an all-in-one system designed specifically to
for small standalone or small networked studios, where no more than
eight faders are needed. A Radius 8-Fader control surface (P/N 2001-
00273) and a QOR.16 integrated console engine (P/N 2001-00274, order
separately below) constitute a complete Radius system. The Radius
surface connects to the QOR.16 engine with a single CANBus cable.
Radius includes 4 stereo Program buses 3 dedicated Program,
Audition and Utility mixing outputs; the fourth a stereo Utility bus for
recording phone callers or other off-air bits. The fourth bus may also be
used as an additional Program bus. Automatic mix-minus is provided on
each fader, plus talkback functions, one-button off-air Record Mode, Show
Profile instant recall of up to 4 pre-defined console snapshots , LED bargraph
program meters switchable between VU and PPM meter styles,
high-resolution OLED option displays on each fader, and Studio and
Control Room monitor controls.
Radius can be placed on top of desk surface, mounted drop-in style, or
rack-mounted using included hardware. Unit weight: 12 lbs / 5.5 kg.
Shipping weight 25 lbs / 11.4 kg.
P/N 2001-00273 HW 2.995,00
QOR.16 Integrated Console Engine NEW P/N 2001-00274 HW 2.995,00
QOR.16 integrated console engine includes DSP-based mixing engine,
audio I/O, machine-control logic, Ethernet switch. 2 mic inputs, 8 Analog
inputs, 4 Analog outputs, 1AES/EBU input and 1 AES/EBU output, 4
GPIO, Ethernet switch with 6 Livewire 100Base-T ports (4 with PoE), 2
Gigabit ports (RJ-45 & SFP) for connection to Livewire networks. I/O can
be easily expanded using Axia Audio Nodes (see Section 6). Auto-sensing
power supply, 90VAC to 240VAC, 50 Hz to 60 Hz. 500 Watts. Rackmount,
2RU.
iQ Console System
iQ 8-Fader Main Frame
The iQ system can be used to build custom consoles of sizes from 8 to 24
faders. A basic system consists of one iQ 8-Fader Main Frame (P/N 2001-
00275) and one QOR.32 integrated console engine (P/N 2001-00275,
order separately below). The iQ mixing surface plugs into the QOR.32
engine using a single CANBus cable. iQ operates as a standalone
console, but can also connect to Axia networks. Faders and control
capabilities can be expanded by adding one or more of the iQ Expansion
Frames described below. Features include 3 dedicated stereo Program
buses, plus a stereo Utility bus that can be used for phone calls, off-air
recording, or as a fourth Program bus. Automatic mix-minus is provided
on each fader, plus talkback functions, one-button off-air Record Mode,
Show Profile functions for instant recall of up to 4 pre-defined console
snapshots , highresolution OLED program meters switchable between
VU and PPM metering styles, sharp OLED option displays on each fader
strip, Studio and Control Room monitor controls.
P/N 2001-00275 HW 4.195,00
Auto-switching iQ Backup Power Supply (P/N 2001-00277, see below)
can be added for redundant power backup. iQ console frames may be
placed on top of desk surface, mounted drop-in style, or rack-mounted
using included hardware. Multiple frames may be physically joined. Unit
weight: 12 lbs / 5.5 kg. Shipping weight 25 lbs / 11.4 kg.
THUM + MAHR GmbH
D-40789 Monheim am Rhein, Germany
Phone +49-2173-967322 - Fax +49-2173-967400 Stand 01.11.2011 Seite 1 von 22

QOR.32 integrated console engine
Beschreibung Part Nummer Key Einzelpreis
QOR.32 Integrated Console Engine P/N 2001-00276 HW 4.195,00
QOR.32 integrated console engine includes DSP-based mixing engine,
audio I/O, machine-control logic, Ethernet switch. 4 mic inputs, 16 Analog
inputs, 8 Analog outputs, 2 AES/EBU ins/outs, 8 GPIO, Ethernet switch
with 6 Livewire 100Base-T ports (4 with PoE), 2 Gigabit ports (RJ-45 &
SFP). I/O can be easily expanded using Axia Audio Nodes (see Section
6). QOR.32 supports consoles of up to 24 faders or three console frames.
Auto-sensing power supply, 90VAC to 240VAC, 50 Hz to 60 Hz. 500
Watts. Rackmount, 3RU.
iQ 8-Fader Expansion Frame P/N 2001-00283 HW 2.195,00
The iQ 8-Fader Expansion Frame plugs in to the iQ Core using an
available CANBus connector; adds eight faders to your iQ Main Frame.
Utilizes 100mm conductive-plastic faders, aircraft-quality switches and
LED key back-lighting. May be placed on top of desk surface or mounted
drop-in style. iQ frames can be physically joined using included hardware.
Unit weight: 9 lbs / 4 kg. Shipping weight: 20 lbs / 9 kg.
iQ 6-Fader Expansion Frame + User Buttons P/N 2001-00285 HW 2.195,00
The iQ 6-Fader Expansion Frame plugs in to the iQ Core using an
available CANBus connector; adds six faders to your iQ Main Frame, plus
10 Film-Cap buttons to control GPIO closures to peripheral audio devices.
Utilizes 100mm conductive-plastic faders, aircraft-quality switches and
LED key back-lighting. May be placed on top of desk surface or mounted
drop-in style. iQ frames can be physically joined using included hardware.
Unit weight: 9 lbs / 4 kg. Shipping weight: 20 lbs / 9 kg.
iQ 6-Fader Telco Expansion Frame P/N 2001-00284 HW 2.195,00
The iQ 6-Fader Telco Expansion Frame plugs in to the iQ Core using an
available CANBus connector; adds six faders to your iQ Main Frame. Builtin
Telco section provides easy to use, on-the-board control of Telos iQ6
telephone hybrid (see below). Includes OLED Status Symbols visual
call management display, direct control of six phone lines and two hybrids,
DTMF dial pad. Utilizes 100mm conductive-plastic faders, aircraft-quality
switches and LED key back-lighting. May be placed on top of desk surface
or mounted drop-in style. iQ frames can be physically joined using
included hardware. Unit weight: 9 lbs / 4 kg. Shipping weight: 20 lbs / 9 kg.
iQ6 Six-Line Telco Gateway for iQ NEW
POTS
Dual-hybrid iQ6 connects directly to your iQ via Ethernet - no discrete I/O
needed. Controlled by the Call Controller section of the iQ Telco
Expansion Frame, or with optional Telos VSet phone or included VX
Producer call screening software. Requires one unused Ethernet port on
iQ Core or network switch. Each iQ6 purchase includes Telos VX
Producer Call Screening Software. Rackmount, 1RU.
iQ6 Six-Line Telco Gateway for iQ NEW
ISDN S (4-Wire) Interface Card
For use outside North America
Dual-hybrid iQ6 connects directly to your iQ via Ethernet - no discrete I/O
needed. Controlled by the Call Controller section of the iQ Telco
Expansion Frame, or with optional Telos VSet phone or included VX
Producer call screening software. Requires one unused Ethernet port on
iQ Core or network switch. Each iQ6 purchase includes Telos VX
Producer Call Screening Software. Rackmount, 1RU.
P/N 2001-00248 HW 1.995,00
P/N 2001-00256 HW 1.995,00
THUM + MAHR GmbH
D-40789 Monheim am Rhein, Germany
Phone +49-2173-967322 - Fax +49-2173-967400 Stand 01.11.2011 Seite 2 von 22

Beschreibung Part Nummer Key Einzelpreis
iQ Backup Power Supply P/N 2001-00277 HW 1.095,00
Add redundant power to your iQ system! Single-cable connection to
QOR.32 console engine provides backup power with automatic switching.
Auto-sensing power supply, 90VAC to 240VAC, 50 Hz to 60 Hz. 500
Watts. Rackmount, 2RU.
Element Console Systems
Element 4-Position Mainframe
Width: 11.3 in (28.7 cm.), Front-to-back: 20.25 in. (51.5 cm.)
Element 2.0 modular console is available in sizes from 4 to 28 positions,
with support for up to 40 faders in multiple linked frames. Element is
designed to work with the Axia PowerStation or Studio Mix Engine and
plugs into the network with a single CAT-6 Ethernet cable. Features four
Program buses and four auxiliary buses. A variety of module types provide
control of mic/line inputs, telephones and other devices. Enhanced,
integrated features for phones and codecs include auto-assigned mixminus
on each channel, easy talkback for remote talent cueing, onebutton
off-air phone record mode, and optional integrated Telco line
switching. Show Profiles allow console snapthots with different
preferences, layouts and defaults to be loaded instantly, customizing the
board to each show or talent if desired. Includes digital EQ, Omnia
dynamic mic processing, and many other advanced features. Allows
sharing of audio resources across multiple studios. Requires usersupplied
VGA monitor for metering and options display.
Element consoles require a power supply and mixing engine. Element
may be used with either a separate Element Power Supply (P/N 2001-
00170) and Studio Mix Engine (P/N 2001-00139), or the PowerStation allin-one
power supply/mixing engine/audio I/O center (P/N 2001-00251)
described later in this section.
P/N 2001-00172 SW 1.345,00
Element 8-Position Mainframe P/N 2001-00173 SW 1.475,00
Width: 18.3 in (46.5 cm.), Front-to-back: 20.25 in. (51.5 cm.)
Element 12-Position Mainframe P/N 2001-00174 SW 1.605,00
Width: 25.3 in (64.3 cm.), Front-to-back: 20.25 in. (51.5 cm.)
Element 14-Position Mainframe P/N 2001-00280 SW 1.670,00
Width: 29.25 in (74.3 cm.), Front-to-back: 20.25 in. (51.5 cm.)
Element 16-Position Mainframe P/N 2001-00175 SW 1.735,00
Width: 32.3 in (82.1 cm.), Front-to-back: 20.25 in. (51.5 cm.)
Element 20-Position Mainframe P/N 2001-00176 SW 1.865,00
Width: 39.3 in (99.8 cm.), Front-to-back: 20.25 in. (51.5 cm.)
Element 22-Position Mainframe P/N 2001-00229 SW 1.930,00
Width: 42.8 in (108.7 cm.), Front-to-back: 20.25 in. (51.5 cm.)
Element 24-Position Mainframe P/N 2001-00177 SW 1.995,00
Width: 46.3 in (117.6 cm.), Front-to-back: 20.25 in. (51.5 cm.)
Element 28-Position Mainframe P/N 2001-00178 SW 2.125,00
Width: 53.3 in (135.4 cm.), Front-to-back: 20.25 in. (51.5 cm.)
THUM + MAHR GmbH
D-40789 Monheim am Rhein, Germany
Phone +49-2173-967322 - Fax +49-2173-967400 Stand 01.11.2011 Seite 3 von 22

Beschreibung Part Nummer Key Einzelpreis
PowerStation Main
Power Supply + Mix Engine + Audio I/O
PowerStation is an all-in-one studio solution that combines audio I/O, a
console power supply, mixing engine and network switch into one easytodeploy
package. Each PowerStation Main provides:
4 Analog inputs and 6 Analog outputs
2 AES/EBU inputs and 2 AES/EBU outputs
2 Microphone inputs with selectable Phantom power
4 GPIO machine-control logic ports, each with 5 inputs and 5 outputs
An integrated network switch with 10 100Base-T Ethernet ports, 4
100Base-T ports with PoE (Power over Ethernet), and 2 1000Base-T
(Gigabit) ports with SFP
Heavy-duty power supply
Industrial CPU designed for harsh-environment reliability
Use PowerStation Main with an Element console as a standalone studio
solution, or connect to other Axia equipment as part of a larger IP-Audio
network. Simple Networking allows daisy-chain connection of up to 4
PowerStation-based studios without the use of an external network switch.
Connecting a PowerStation Aux (P/N 2001-00252) adds autoswitching
redundant backup power and doubles audio I/O and GPIO capacity. I/O
can also be easily expanded using
P/N 2001-00251 HW 8.995,00
Axia Audio Nodes. Autosensing power supply, 90VAC to 240VAC, 50 Hz
to 60 Hz. 500 Watts. Rackmount, 4RU. Shipping weight: 45 lbs. / 21.3
kgs. Mounting depth requirement: 18 from rack rails to rear of unit,
allowing for cable connections.
PowerStation Aux
Redundant Backup Power Supply + Audio I/O Expansion
Connects with PowerStation Main (P/N 2001-00251) to adds
autoswitching redundant backup power and double the audio I/O and
GPIO capacity. Each PowerStation Aux provides:
4 Analog inputs and 6 Analog outputs
2 AES/EBU inputs and 2 AES/EBU outputs
2 Microphone inputs with selectable Phantom power
4 GPIO machine-control logic ports, each with 5 inputs and 5 outputs
One 100Base-T Ethernet connection to PowerStation Main
Heavy-duty, auto-switching redundant backup power supply for
PowerStation Main
Auto-sensing power supply, 90VAC to 240VAC, 50 Hz to 60 Hz. 500
Watts. Rackmount, 4RU. Shipping weight: 40 lbs. / 18.2 kgs.
P/N 2001-00252 HW 4.395,00
StudioEngine console mixing engine P/N 2001-00139 HW 3.995,00
The networked StudioEngine, based on a Pentium IV motherboard
running real-time Linux, provides bulletproof mixing console signal
processing. All connections into and out of the Studio Engine are via a
single 1000BT Ethernet port. Each engine is equipped with multiple
simultaneous inputs, outputs, mix-minus feeds, monitor signals, etc.
Additionally, the Studio Mix Engine can provide EQ for multiple channels
and has extra capacity to support expansion features. Autosensing power
supply, 90VAC to 240VAC, 50 Hz to 60 Hz. 100 Watts. Rackmount, 2RU.
Only one Studio Engine is required per Element console, whether singleframe
or split-frame configuration.
Element Power Supply + GPIO Node P/N 2001-00170 HW 2.995,00
Element 48VDC power supply includes GPIO Node with 8 assignable
logic ports. Each port contains 5 opto-isolated inputs and 5 optoisolated
outputs, which can be associated with audio sources and/or destinations
to provide machine start/stop pulses, lamp drives, and remote channel
controls. One required for each Element console using StudioEngine
(above), in single or split-frame configurations not required for Element
consoles using PowerStation. Additional GPIO nodes without power
supplies (P/N 2001-00007) may be added as needed. Rackmount, 2 RU;
auto-sensing power supply, 90VAC to 240VAC, 50 Hz to 60 Hz. 150
Watts.
THUM + MAHR GmbH
D-40789 Monheim am Rhein, Germany
Phone +49-2173-967322 - Fax +49-2173-967400 Stand 01.11.2011 Seite 4 von 22

Beschreibung Part Nummer Key Einzelpreis
Element Modular Control Surface Options
Pick Your Console Color
Choice is good! All Element 2.0 modules are available in your choice of
bright Silver or bold Bronze, with tough Lexan surfaces and high-impact
paint to resist scuffing and wear.
4-Fader Module w/ Rotary Options Control
Silver
4-fader module for use with any line, mic, hybrid or codec sources;
100mm long-life conductive-plastic faders, HOLD and SET controls for
Telos telephone hybrids. Rotary Options Control knob can be
programmed to trim source or fader gain when turned; invokes Options
screen when pressed. Includes alphanumeric channel displays. Occupies
4 frame positions.
P/N 2001-20279 HW 2.295,00
4-Fader Module w/ Rotary Options Control
Bronze
4-fader module for use with any line, mic, hybrid or codec sources;
100mm long-life conductive-plastic faders, HOLD and SET controls for
Telos telephone hybrids. Rotary Options Control knob can be
programmed to trim source or fader gain when turned; invokes Options
screen when pressed. Includes alphanumeric channel displays. Occupies
4 frame positions.
P/N 2001-30279 HW 2.295,00
Motorized 4-Fader Module w/ Rotary Options Control
Silver
Same features as 4-Fader module 2001-xx279 above, but with motorized
faders that work with Element Show Profiles or PathfinderPC software to
assume preset levels upon command. Includes alphanumeric channel
displays. Comes with required conductive Silver fader knobs.
Motorized 4-Fader Module w/ Rotary Options Control
Bronze
Same features as 4-Fader module 2001-xx279 above, but with motorized
faders that work with Element Show Profiles or PathfinderPC software to
assume preset levels upon command. Includes alphanumeric channel
displays. Comes with required conductive Silver fader knobs.
Call Controller + 2-Fader Phone Module w/ Rotary Options Control
Silver
This module integrates control of Telos VX, Nx12, Nx6, TWOX12, Series
2101 and VX telephone systems right into the console. 2-fader telephone
control module features integrated Telos Call Controller with Status
Symbols . Rotary Options Control knob can be programmed to trim
source or fader gain when turned; invokes Options screen when pressed.
Includes alphanumeric channel displays. Occupies 4 frame positions.
P/N 2001-20203 HW 2.895,00
P/N 2001-30203 HW 2.895,00
P/N 2001-20280 HW 2.295,00
THUM + MAHR GmbH
D-40789 Monheim am Rhein, Germany
Phone +49-2173-967322 - Fax +49-2173-967400 Stand 01.11.2011 Seite 5 von 22

Beschreibung Part Nummer Key Einzelpreis
Call Controller + 2-Fader Phone Module w/ Rotary Options Control
Bronze
This module integrates control of Telos VX, Nx12, Nx6, TWOX12, Series
2101 and VX telephone systems right into the console. 2-fader telephone
control module features integrated Telos Call Controller with Status
Symbols . Rotary Options Control knob can be programmed to trim
source or fader gain when turned; invokes Options screen when pressed.
Includes alphanumeric channel displays. Occupies 4 frame positions.
Motorized Call Controller + 2-Fader Phone Module w/ Rotary Options Control
Silver
Identical to Call Controller 2001-xx280 above, but with motorized faders
that work with Element Show Profiles or PathfinderPC software to assume
preset levels upon command. Includes alphanumeric channel displays.
Occupies 4 frame positions.
Motorized Call Controller + 2-Fader Phone Module w/ Rotary Options Control
Bronce
Identical to Call Controller 2001-xx280 above, but with motorized faders
that work with Element Show Profiles or PathfinderPC software to assume
preset levels upon command. Includes alphanumeric channel displays.
Occupies 4 frame positions.
P/N 2001-30280 HW 2.295,00
P/N 2001-20204 HW 2.595,00
P/N 2001-30204 HW 2.595,00
Element Production Module
Silver
The perfect addition for production studios. User panel gives direct access
to frequently-used production options, such as Send bus levels, EQ
settings, and stereo audio positioning tools. Includes overbridge selector
panel with alphanumeric source display. Occupies 2 frame positions.
P/N 2001-20196 HW 2.295,00
Element Production Module
Bronze
The perfect addition for production studios. User panel gives direct access
to frequently-used production options, such as Send bus levels, EQ
settings, and stereo audio positioning tools. Includes overbridge selector
panel with alphanumeric source display. Occupies 2 frame positions.
P/N 2001-30196 HW 2.295,00
Film-Cap Switch Modules
5-Button Film-Cap Switch Module
Silver
Film-cap buttons provide access to often-used machine-control or
software functions. Includes overbridge filler panel. Occupies 1 frame
position. Requires PathfinderPC (P/N 3001-0015).
5-Button Film-Cap Switch Module
Bronze
Film-cap buttons provide access to often-used machine-control or
software functions. Includes overbridge filler panel. Occupies 1 frame
position. Requires PathfinderPC (P/N 3001-0015).
P/N 2001-20187 HW 645,00
P/N 2001-30187 HW 645,00
THUM + MAHR GmbH
D-40789 Monheim am Rhein, Germany
Phone +49-2173-967322 - Fax +49-2173-967400 Stand 01.11.2011 Seite 6 von 22

Beschreibung Part Nummer Key Einzelpreis
10-Button Film-Cap Switch Module
Silver
Film-cap buttons provide access to often-used machine-control or
software functions. Includes overbridge filler panel. Occupies 1 frame
position. Requires PathfinderPC (P/N 3001-0015).
10-Button Film-Cap Switch Module
Bronze
Film-cap buttons provide access to often-used machine-control or
software functions. Includes overbridge filler panel. Occupies 1 frame
position. Requires PathfinderPC (P/N 3001-0015).
LCD SmartSwitch Modules
5-Button LCD SmartSwitch Module
Silver
Program these backlit LCD button panels using Axia PathfinderPC
software to provide 1-touch access to often-used machine-control or
software functions. In-button LCD display shows function readout.
Dynamic programming allows assigned functions to change with each
Show Profile or in response to user keypress. Includes alphanumeric
display. Occupies 1 frame position. Requires PathfinderPC (P/N 3001-
0015).
5-Button LCD SmartSwitch Module
Bronze
Program these backlit LCD button panels using Axia PathfinderPC
software to provide 1-touch access to often-used machine-control or
software functions. In-button LCD display shows function readout.
Dynamic programming allows assigned functions to change with each
Show Profile or in response to user keypress. Includes alphanumeric
display. Occupies 1 frame position. Requires PathfinderPC (P/N 3001-
0015).
10-Button LCD SmartSwitch Module
Silver
Program these backlit LCD button panels using Axia PathfinderPC
software to provide 1-touch access to often-used machine-control or
software functions. In-button LCD display shows function readout.
Dynamic programming allows assigned functions to change with each
Show Profile or in response to user keypress. Includes alphanumeric
display. Occupies 1 frame position. Requires PathfinderPC (P/N 3001-
0015).
10-Button LCD SmartSwitch Module
Bronze
Program these backlit LCD button panels using Axia PathfinderPC
software to provide 1-touch access to often-used machine-control or
software functions. In-button LCD display shows function readout.
Dynamic programming allows assigned functions to change with each
Show Profile or in response to user keypress. Includes alphanumeric
display. Occupies 1 frame position. Requires PathfinderPC (P/N 3001-
0015).
Single-Position Filler Module w/Overbridge Filler
Silver
Blanking plate with overbridge filler panel. Occupies 1 frame position.
Single-Position Filler Module w/Overbridge Filler
Bronze
Blanking plate with overbridge filler panel. Occupies 1 frame position.
P/N 2001-20188 HW 995,00
P/N 2001-30188 HW 995,00
P/N 2001-20189 HW 1.165,00
P/N 2001-30189 HW 1.165,00
P/N 2001-20190 HW 1.795,00
P/N 2001-30190 HW 1.795,00
P/N 2001-20186 HW 65,00
P/N 2001-30186 HW 65,00
THUM + MAHR GmbH
D-40789 Monheim am Rhein, Germany
Phone +49-2173-967322 - Fax +49-2173-967400 Stand 01.11.2011 Seite 7 von 22

Beschreibung Part Nummer Key Einzelpreis
20 Station OLED Element Intercom Module
Silver
Part of the Axia IP Intercom system. Provides instant access to 20
preprogrammed intercom stations. Individual talk and listen buttons and
high-rez OLED displays give fast access to frequently-called stations. Mic
audio is taken directly from the console operator s microphone; returning
audio is directed to the console s preview (cue) speaker. Includes Autoanswer,
dedicated listen volume control, individual mic and speaker mute
keys and group talk functions. Overbridge display works with Element
monitor module numeric keypad to give direct access to any station; can
also be used to dial outside phone lines for intercom conversations (using
an optional telephone hybrid). Station presets and GPIO functions are
programmed using any standard Web browser. Occupies 2 frame
positions.
P/N 2001-20253 HW 1.895,00
20 Station OLED Element Intercom Module
Bronze
Part of the Axia IP Intercom system. Provides instant access to 20
preprogrammed intercom stations. Individual talk and listen buttons and
high-rez OLED displays give fast access to frequently-called stations. Mic
audio is taken directly from the console operator s microphone; returning
audio is directed to the console s preview (cue) speaker. Includes Autoanswer,
dedicated listen volume control, individual mic and speaker mute
keys and group talk functions. Overbridge display works with Element
monitor module numeric keypad to give direct access to any station; can
also be used to dial outside phone lines for intercom conversations (using
an optional telephone hybrid). Station presets and GPIO functions are
programmed using any standard Web browser. Occupies 2 frame
positions.
P/N 2001-30253 HW 1.895,00
10 Station OLED Element Intercom Module
Silver
Part of the Axia IP Intercom system. 10-station Intercom module has 10character
OLED displays, Auto-answer function, dedicated listen volume
control, mute keys for speaker and mic. Mic audio is taken directly from
the console operator s microphone; returning audio is directed to the
console s preview (cue) speaker. Station presets and GPIO functions are
programmed using any standard Web browser. Occupies 1 frame
position.
P/N 2001-20254 HW 1.395,00
10 Station OLED Element Intercom Module
Bronze
Part of the Axia IP Intercom system. 10-station Intercom module has 10character
OLED displays, Auto-answer function, dedicated listen volume
control, mute keys for speaker and mic. Mic audio is taken directly from
the console operator s microphone; returning audio is directed to the
console s preview (cue) speaker. Station presets and GPIO functions are
programmed using any standard Web browser. Occupies 1 frame
position.
P/N 2001-30254 HW 1.395,00
10 Station Film-Cap Element Intercom Module
Silver
Part of the Axia IP Intercom system. Affordable 10-Station intercom
module features 10 LED-lit film-cap buttons. Provides dedicated listen
volume control, speaker and mic mute buttons and single-button calling of
up to 10 preset stations. Mic audio is taken directly from the console
operator s microphone; returning audio is directed to the console s
preview (cue) speaker. Station presets and GPIO functions are
programmed using any standard Web browser. Occupies 1 frame
position.
P/N 2001-20255 HW 1.045,00
THUM + MAHR GmbH
D-40789 Monheim am Rhein, Germany
Phone +49-2173-967322 - Fax +49-2173-967400 Stand 01.11.2011 Seite 8 von 22

Beschreibung Part Nummer Key Einzelpreis
10 Station Film-Cap Element Intercom Module
Bronze
Part of the Axia IP Intercom system. Affordable 10-Station intercom
module features 10 LED-lit film-cap buttons. Provides dedicated listen
volume control, speaker and mic mute buttons and single-button calling of
up to 10 preset stations. Mic audio is taken directly from the console
operator s microphone; returning audio is directed to the console s
preview (cue) speaker. Station presets and GPIO functions are
programmed using any standard Web browser. Occupies 1 frame
position.
P/N 2001-30255 HW 1.045,00
Element Console Director for Legacy Telos Phone Systems (ONE-x-
Six, Direct Interface Module, 1A2), for consoles with Silver or Bronze modules
10-line, +12v telephone control module features line control and DTMF
functions. For use with Telos ONE-x-Six, Direct Interface Module and 1A2
Talkshow Systems. Faders not supplied; works in conjunction with
standard Element fader modules. Includes overbridge filler panel.
Occupies two frame positions.
Element Console Director for NewGen Telos Phone Systems (Nx6,
Nx12, TWOx12, Series 2101) consoles with Silver or Bronze modules
12-line, +48v telephone control module features line control and DTMF
functions. For use with Telos Nx6, Nx12, TWOx12 and Series 2101
Talkshow Systems. Faders not supplied; works in conjunction with
standard Element fader modules. Includes overbridge filler panel.
Occupies two frame positions.
P/N 2001-20193 HW 1.395,00
P/N 2001-20243 HW 1.395,00
Monitor + 2-Fader Module w/ Rotary Options Control
Silver
Space-saving module includes two faders. Includes numeric entry/dial
pad, basic Monitor/Headphone controls and SoftKnob overbridge control
set with alphanumeric display. 100mm long-life conductive plastic faders.
Rotary Options Control knob can be programmed to trim source or fader
gain when turned; invokes Options screen when pressed. Includes
alphanumeric channel displays. Occupies 4 frame positions. One Monitor
Module per console required.
P/N 2001-20321 HW 2.295,00
Monitor + 2-Fader Module w/ Rotary Options Control
Bronze
Space-saving module includes two faders. Includes numeric entry/dial
pad, basic Monitor/Headphone controls and SoftKnob overbridge control
set with alphanumeric display. 100mm long-life conductive plastic faders.
Rotary Options Control knob can be programmed to trim source or fader
gain when turned; invokes Options screen when pressed. Includes
alphanumeric channel displays. Occupies 4 frame positions. One Monitor
Module per console required.
P/N 2001-30321 HW 2.295,00
Motorized Monitor + 2-Fader Module w/ Rotary Option Control
Silver
Same features as 2001-xx321 above, but with motorized faders that work
with Show Profiles or PathfinderPC software to assume preset levels.
Includes SoftKnob overbridge control set and alphanumeric display.
Occupies 4 frame positions. One Monitor Module per console required.
P/N 2001-20222 HW 2.595,00
Motorized Monitor + 2-Fader Module w/ Rotary Option Control
Bronze
Same features as 2001-xx321 above, but with motorized faders that work
with Show Profiles or PathfinderPC software to assume preset levels.
Includes SoftKnob overbridge control set and alphanumeric display.
Occupies 4 frame positions. One Monitor Module per console required.
P/N 2001-30222 HW 2.595,00
THUM + MAHR GmbH
D-40789 Monheim am Rhein, Germany
Phone +49-2173-967322 - Fax +49-2173-967400 Stand 01.11.2011 Seite 9 von 22

Beschreibung Part Nummer Key Einzelpreis
Monitor/Navigation Module
Silver
Master module with Deluxe monitor, headphone and preview volume
controls, dedicated selection keys for Program, Aux Sends or External
monitor. Numeric entry/dialpad for use with Element Phone modules. Nav
pad for onscreen options control; profanity delay controls can be linked to
external delay unit. Includes SoftKnob overbridge control set. Occupies 4
frame positions. One Monitor Module per console required.
P/N 2001-20181 HW 2.295,00
Monitor/Navigation Module
Bronze
Master module with Deluxe monitor, headphone and preview volume
controls, dedicated selection keys for Program, Aux Sends or External
monitor. Numeric entry/dialpad for use with Element Phone modules. Nav
pad for onscreen options control; profanity delay controls can be linked to
external delay unit. Includes SoftKnob overbridge control set. Occupies 4
frame positions. One Monitor Module per console required.
P/N 2001-30181 HW 2.295,00
Axia SoftSurface Virtual Console Software NEW P/N 3001-00049 SW 995,00
New Axia SoftSurface gives you powerful real-time remote control of your
Axia Element 2.0 mixing console! With SoftSurface, you can operate your
Element from any PC connected to the Livewire network. Or, pair
SoftSurface with an Axia StudioEngine to create a virtual console that you
can control from remotes, transmitter sites even from home.
SoftSurface makes an ideal companion for existing consoles; it s also the
perfect audio mixing solution for limited-space locations. SoftSurface
remotely controls any physical Element console, and pairs with Axia
StudioEngine as a Virtual Console. Compatible with Windows Windows 7
operating systems; 20Mb free disc space required.
Mic Control / Headphone Selector Panel
Silver
Deluxe in-studio accessory panel mounts in tabletop or turret. Provides
remote control of mic on/off functions; dedicated Mute and Talkback
buttons give talent full control of their position. Volume/selection knob
allows users to select their headphone monitor source; alphanumeric
display readout confirms their choice. Easily connects to Element CANbus
using CAT-5 cable. 6 x 2 , requires 2 mounting depth.
P/N 2001-20199 HW 595,00
Headphone Selector Panel
Silver
In-studio accessory panel with volume/selection knob mounts in tabletop
or turret to allow users to select their headphone monitor source;
alphanumeric display readout confirms their choice. Two preset buttons let
talent set and quickly recall frequently-listened-to sources. Easily connects
to Element CANbus using CAT-5 cable. 6 x 2 , requires 2 mounting
depth.
P/N 2001-20200 HW 545,00
Mic Control Panel
Silver
In-studio accessory panel for remote control of mic on/off functions.
Mounts in tabletop or turret; includes dedicated Mute and Talkback
buttons. Requires 1 free Axia GPIO port per panel. 6 x 2 , requires 2
mounting depth.
P/N 2001-20201 HW 345,00
THUM + MAHR GmbH
D-40789 Monheim am Rhein, Germany
Phone +49-2173-967322 - Fax +49-2173-967400 Stand 01.11.2011 Seite 10 von 22

Beschreibung Part Nummer Key Einzelpreis
Producer s Mic Control Panel
Silver
Special accessory panel for producers mounts in tabletop or turret to
provide remote control of mic on/off functions, includes dedicated Mute
key. Two Talkback keys allow producers to talk to control room board op,
studio guests, or both. Requires 1 free Axia GPIO port per panel. 6 x 2 ,
requires 2 mounting depth.
P/N 2001-20202 HW 395,00
Blank Accessory Panel
Silver
Filler panel for in-studio use. 6 x 2 .
P/N 2001-20207 HW 54,00
4-Button Element LCD SmartSwitch Panel
Silver
Program these backlit LCD button panels using Axia PathfinderPC
software to provide producers or talent with 1-touch remote access to
often-used machine-control or software functions. In-button LCD display
shows function readout. Dynamic programming allows specific assigned
functions to change for each Show Profile, if desired. Requires
PathfinderPC (P/N 3001-0015). Works with Element consoles only; easily
connects to CANbus using CAT-5 cable. Mounts in tabletop or turret. 6 x
2 , requires 2 mounting depth.
P/N 2001-20198 HW 795,00
5-Button Film-Cap Switch Panel
Silver
Film-cap accessory switch panel for use at interview or producer s
positions. Can be programmed to provide 1-touch remote access to oftenused
machine-control or software functions. Works with Element or
SmartSurface control surfaces. Requires PathfinderPC (P/N 3001-0015)
and 1 free Axia GPIO port per panel. Mounts in tabletop or turret. 6 x 2 ,
requires 2 mounting depth.
P/N 2001-20197 HW 445,00
6-Position Studio Accessory Panel Rack Frame P/N 2001-00117 HW 215,00
Allows easy mounting of Axia Studio Accessory Panels in rack turrets
instead of desktops. 4RU rack frame is made of heavy metal, with
mounting positions for up to 6 Axia Studio Accessory Panels. 4RU;
requires 2 empty space behind for cable clearance.
Element Split-Frame CANBus Y Connector P/N 2001-00122 HW 95,00
Y cable required when connecting two Element mixing surfaces to a
single #2001-00251 PowerStation console engine, or to a #2001-00170
Element Power Supply for use as a single, split-frame console.
Element Touchscreen Timer, Desktop P/N 2001-00244 HW 3.295,00
Standalone, desktop timer accessory gives studio guests, producers and
show hosts access to functions only the board operator had until now. An
elegant, touch-sensitive interface features digital and analog time-ofday
clocks, elapsed-time counter with freeze and pause functions, and
adjustable event countdown timer. Touchscreen Timer can be slaved to
the console timer, act as timer master, or operate independently. Requires
one unused 100Base-T Ethernet port for connection to an Axia network.
THUM + MAHR GmbH
D-40789 Monheim am Rhein, Germany
Phone +49-2173-967322 - Fax +49-2173-967400 Stand 01.11.2011 Seite 11 von 22

Beschreibung Part Nummer Key Einzelpreis
Element Touchscreen Timer Panel, Rackmount
+ 3-Position Accessory Rack Frame
Rackmount version of Touchscreen Timer accessory gives studio guests,
producers and show hosts access to functions only the board operator
had until now. An elegant, touch-sensitive interface features digital and
analog time-of-day clocks, elapsed-time counter with freeze and pause
functions, and adjustable event countdown timer. Touchscreen Timer can
be slaved to the console timer, act as timer master, or operate
independently. Rackmount frame provides CANBus and GPIO expansion
ports and mounting positions for up to 3 Axia Studio Accessory Panels.
Universal internal power supply. 4RU high, 10 (25.4 cm) deep; requires
one unused 100Base-T Ethernet port for connection to an Axia network.
P/N 2001-00234 HW 3.695,00
Element Fader Knobs in Color
Customize your Element console with these colored replacement fader
knobs. Red, Blue and Gray colored knobs quickly draw operator s eye to
important fader positions during fast-paced show production; also
available in original Black. Silver Conductive knobs, standard on
Motorized Fader modules, can be used to dress up standard modules as
well. Price per knob, sold individually.
Element Conductive Fader Knob - Silver only
Silver Conductive knobs, standard on Motorized Fader modules, can be
used to dress up standard modules as well. Price per knob, sold
individually.
P/N 1453-#####-
101
Red -00054-
Blue -00055-
Gray -00056-
Black -00004-
P/N 1453-00034-
101
HW 4,95
HW 8,95
PathfinderPC Router Control Software P/N 3001-00015 SW 1.995,00
Designed for automated routing control in small to medium-sized facilities,
PathfinderPC provides a central point of control, via IP, of up to 25 Axia
devices in your plant. Capabilities include route or scene changes based
on scheduled events, GPIO closure or Silence Detect trigger events.
Includes one server license, which supports up to 10 PathfinderPC client
or PathfinderPC Mini connections. Requires P2-400 MHz (or greater) PC,
with 10/100 or 100/1000 Ethernet NIC running Windows XP or Windows
2003 Server or better.
PathfinderPRO Router Control Software P/N 3001-00043 SW 3.595,00
Enterprise version of PathfinderPC software contains all features found in
PathfinderPC plus additional capabilities tailored to facilities with large
physical plants or complex operational requirements. Controls an
unlimited number of Axia devices and supports unlimited PathfinderPC
client or PathfinderPC Mini connections; also supports direct Pathfinder
control of Element Motorized Faders, Element VMix Virtual Mixers and
more. Includes Translators for Pro-Bel General Router and General
Switcher Protocols, Sine Systems ACU-1 Protocol and BTools Protocol,
plus support for the SA Port Router application. Includes two server
licenses for backup server or server clustering. Requires P2-400 MHz (or
greater) PC, with 10/100 or 100/1000 Ethernet NIC running Windows
2003 Server or better (two PCs required for clustering installation).
THUM + MAHR GmbH
D-40789 Monheim am Rhein, Germany
Phone +49-2173-967322 - Fax +49-2173-967400 Stand 01.11.2011 Seite 12 von 22

Beschreibung Part Nummer Key Einzelpreis
PathfinderPC to PathfinderPRO Software UPGRADE P/N 2011-00060 SW 1.695,00
Upgrades users of PathfinderPC to PathfinderPRO. License number of
previous PathfinderPC installation must accompany order to verify
upgrade eligibility. Note: Clients who purchased PathfinderPC prior to 1
July, 2008 may obtain an upgrade to PathfinderPRO at no additional cost.
Contact your Axia representative for details. THUM+MAHR GmbH,
Heinrich-Hertz-Strasse 1-3, 40789 Monheim, 0049 - 2173 - 9673-22.
Pathfinder Core PRO Router Control NEW P/N 2011-00296 SW 6.495,00
Pathfinder Core PRO packs all the power of PathfinderPRO software (and
more) into a Linux-based network-attached appliance. Exclusive features
include automatic router table generation, automatic configuration backup,
improved clustering support for more than two servers, multi-site clusters,
clustering auto-discovery, and powerful new Core Events tools. Perfect for
stations that desire reliable, redundant, systemwide routing control without
PCs. Requires one unused 100Base-T Ethernet port for connection to an
Axia network. Auto-sensing power supply, 90VAC to 240VAC, 50 Hz to 60
Hz. 100 Watts. Rackmount, 2RU.
X1 Router Control Panel, Rackmount P/N 2001-20261 HW 1.145,00
X1 Router Control Panel lets you instantly route any source on your
Livewire network to a specified destination. Scroll through available
channels on the bright, high-visibility display using the selector knob to its
right; then press the Take key to make your route change. 1RU
rackmount package for convenient placement anywhere control is
needed. Requires 1 free Ethernet port.
X2 Router Control Panel, Rackmount P/N 2001-20262 HW 1.595,00
X2 Router Control Panel provides the routing functionality of two X1
Panels in a single chassis; each separate control routes any available
network source to an individually specified destination. Requires 1 free
Ethernet port.
XY Router Control Panel, Rackmount P/N 2001-20263 HW 1.595,00
XY Router Control Panel lets you route any source to any destination with
the click of a button. Choose your desired audio stream, select your
network output and press Take to route audio. 1 RU package can be
placed in any turret or rack. Requires 1 free Ethernet port.
OLED SoftSwitch Router Control Panel, Rackmount P/N 2001-20260 HW 1.145,00
8-Button OLED SoftSwitch provides high-visibility router control from any
studio turret or equipment rack. Its eight bright, sharp OLED (Organic
Light-Emitting Diode) readouts can display text, bitmaps or photos, and
can be seen from nearly any angle across the table, or across the
room. Use PathfinderPC to program custom routing commands you can
invoke instantly with the touch of a button. Requires PathfinderPC (P/N
3001-0015) and 1 free Ethernet port.
5-Button Film-Cap Switch Panel, Rackmount P/N 2001-20223 HW 595,00
Film-cap rackmount accessory switch panel. Can be programmed to
provide 1-touch remote access to often-used machine-control or
software functions. Requires PathfinderPC (P/N 3001-0015) and 1 free
Axia GPIO port per panel.
THUM + MAHR GmbH
D-40789 Monheim am Rhein, Germany
Phone +49-2173-967322 - Fax +49-2173-967400 Stand 01.11.2011 Seite 13 von 22

Beschreibung Part Nummer Key Einzelpreis
10-Button Film-Cap Switch Panel, Rackmount P/N 2001-20224 HW 895,00
Film-cap rackmount accessory switch panel. Can be programmed to
provide 1-touch remote access to often-used machine-control or
software functions. Requires PathfinderPC (P/N 3001-0015) and 2 free
Axia GPIO ports per panel.
15-Button Film-Cap Switch Panel, Rackmount P/N 2001-20225 HW 1.195,00
Film-cap rackmount accessory switch panel. Can be programmed to
provide 1-touch remote access to often-used machine-control or
software functions. Requires PathfinderPC (P/N 3001-0015) and 3 free
Axia GPIO ports per panel.
9-Button LCD SmartSwitch Panel, Rackmount P/N 2001-20231 HW 1.695,00
Rackmount accessory switch panel with dynamic-text, backlit LCD
buttons. Can be programmed to provide 1-touch remote access to up to 8
often-used machine-control or software functions at a time; multiple pages
of button assignments can be programmed for recall with just a touch.
Works with Element or SmartSurface control surfaces. Requires
PathfinderPC (P/N 3001-0015) or PathfinderPRO (P/N 3001-00043) and 1
free Ethernet port per panel.
17-Button LCD SmartSwitch Panel, Rackmount P/N 2001-20232 HW 2.295,00
Rackmount accessory switch panel with dynamic-text, backlit LCD
buttons. Can be programmed to provide 1-touch remote access to up to
16 often-used machine-control or software functions at a time; multiple
pages of button assignments can be programmed for recall with just a
touch. Works with Element or SmartSurface control surfaces. Requires
PathfinderPC (P/N 3001-0015) or PathfinderPRO (P/N 3001-00043) and 1
free Ethernet port per panel.
Router Selector Node P/N 2001-20134 HW 2.295,00
More than just a routing panel, the Router Selector node has its own
stereo audio inputs and outputs both AES/EBU and analog and a frontpanel
headphone jack. Select sources from the Axia network and send
them to the built-in audio output; use input for convenient on-thefly
connection of audio devices to the Axia network. Built-in screen provides
scrollable list of available audio streams, eight programmable radio
buttons give instant access to frequently used sources. Ideal for news or
production rooms, or TOC monitoring. Auto-sensing power supply, 90VAC
to 240VAC, 50 Hz to 60 Hz. 30 Watts. Rackmount, 1RU.
IC.20 20-Station Intercom Panel P/N 2001-20259 HW 3.295,00
IC.20 intercom panel has 20 station presets for quick contact with
frequently-called locations. Perfect for Master Control or TOC; keypad +
display gives fast access to stations system-wide, plus group talk and autoanswer
functions. Can also dial outside phone lines (using an optional
telephone hybrid). 2RU rackmount package features highvisibility 10character
OLED displays, built-in speaker, front- and rearpanel mic
connections, 4-pin locking headset jack, analog I/O on XLR and
StudioHub-compatible RJ-45 connectors, GPIO connection for speaker
mute/dim and external line-status tallies. Requires one unused 100Base-T
Ethernet switch port. Auto-sensing power supply, 90VAC to 240VAC, 50
Hz to 60 Hz. 30 Watts. Rackmount, 1RU.
THUM + MAHR GmbH
D-40789 Monheim am Rhein, Germany
Phone +49-2173-967322 - Fax +49-2173-967400 Stand 01.11.2011 Seite 14 von 22

Beschreibung Part Nummer Key Einzelpreis
IC.10X 10-Station Intercom Expander P/N 2001-20257 HW 1.645,00
ICX.10 pairs with IC.20 intercom panel, adds 10 station presets (each with
10-character OLED display + talk and listen keys) to IC.20 for total of 30
station presets. Requires one unused 100Base-T Ethernet switch port.
Auto-sensing power supply, 90VAC to 240VAC, 50 Hz to 60 Hz. 30 Watts.
Rackmount, 1RU.
IC.10 10-Station Intercom Panel P/N 2001-20258 HW 1.995,00
IC.10 has 10 station presets with high-resolution 10-character OLED
displays for quick contact with frequently-called locations. Programmed
using a standard Web browser. Built-in speaker, front- and rear-panel mic
connections, 4-pin locking headset jack, analog I/O on XLR and
StudioHub-compatible RJ-45 connectors, GPIO connection for speaker
mute/dim and external line-status tallies. Requires one unused 100Base-
T Ethernet switch port. Auto-sensing power supply, 90VAC to 240VAC, 50
Hz to 60 Hz. 30 Watts. Rackmount, 1RU.
IC.1 10-Station Intercom Panel P/N 2001-20256 HW 1.645,00
Cost-effective way to add intercom capabilities to your studios! 10
LEDbacklit film-cap buttons can be labeled with station names;
programming is via Web interface. Built-in speaker and front-panel 4-pin
locking headset jack, front- and rear-panel mic inputs, analog I/O with
XLR and RJ-45 connectors, GPIO speaker mute/dim control. Requires
one unused 100Base-T Ethernet switch port. Auto-sensing power supply,
90VAC to 240VAC, 50 Hz to 60 Hz. 30 Watts. Rackmount, 1RU.
20 Station OLED Element Intercom Module
Silver
Part of the Axia IP Intercom system. Provides instant access to 20
preprogrammed intercom stations. Individual talk and listen buttons and
high-rez OLED displays give fast access to frequently-called stations. Mic
audio is taken directly from the console operator s microphone; returning
audio is directed to the console s preview (cue) speaker. Includes Autoanswer,
dedicated listen volume control, individual mic and speaker mute
keys and group talk functions. Overbridge display works with Element
monitor module numeric keypad to give direct access to any station; can
also be used to dial outside phone lines for intercom conversations (using
an optional telephone hybrid). Station presets and GPIO functions are
programmed using any standard Web browser. Occupies 2 frame
positions.
P/N 2001-20253 HW 1.895,00
20 Station OLED Element Intercom Module
Bronze
Part of the Axia IP Intercom system. Provides instant access to 20
preprogrammed intercom stations. Individual talk and listen buttons and
high-rez OLED displays give fast access to frequently-called stations. Mic
audio is taken directly from the console operator s microphone; returning
audio is directed to the console s preview (cue) speaker. Includes Autoanswer,
dedicated listen volume control, individual mic and speaker mute
keys and group talk functions. Overbridge display works with Element
monitor module numeric keypad to give direct access to any station; can
also be used to dial outside phone lines for intercom conversations (using
an optional telephone hybrid). Station presets and GPIO functions are
programmed using any standard Web browser. Occupies 2 frame
positions.
P/N 2001-30253 HW 1.895,00
THUM + MAHR GmbH
D-40789 Monheim am Rhein, Germany
Phone +49-2173-967322 - Fax +49-2173-967400 Stand 01.11.2011 Seite 15 von 22

Beschreibung Part Nummer Key Einzelpreis
10 Station OLED Element Intercom Module
Silver
Part of the Axia IP Intercom system. 10-station Intercom module has 10character
OLED displays, Auto-answer function, dedicated listen volume
control, mute keys for speaker and mic. Mic audio is taken directly from
the console operator s microphone; returning audio is directed to the
console s preview (cue) speaker. Station presets and GPIO functions are
programmed using any standard Web browser. Occupies 1 frame
position.
P/N 2001-20254 HW 1.395,00
10 Station OLED Element Intercom Module
Bronze
Part of the Axia IP Intercom system. 10-station Intercom module has 10character
OLED displays, Auto-answer function, dedicated listen volume
control, mute keys for speaker and mic. Mic audio is taken directly from
the console operator s microphone; returning audio is directed to the
console s preview (cue) speaker. Station presets and GPIO functions are
programmed using any standard Web browser. Occupies 1 frame
position.
P/N 2001-30254 HW 1.395,00
10 Station Film-Cap Element Intercom Module
Silver
Part of the Axia IP Intercom system. 10-station Intercom module has 10character
OLED displays, Auto-answer function, dedicated listen volume
control, mute keys for speaker and mic. Mic audio is taken directly from
the console operator s microphone; returning audio is directed to the
console s preview (cue) speaker. Station presets and GPIO functions are
programmed using any standard Web browser. Occupies 1 frame
position.
P/N 2001-20255 HW 1.045,00
10 Station Film-Cap Element Intercom Module
Bronze
Part of the Axia IP Intercom system. 10-station Intercom module has 10character
OLED displays, Auto-answer function, dedicated listen volume
control, mute keys for speaker and mic. Mic audio is taken directly from
the console operator s microphone; returning audio is directed to the
console s preview (cue) speaker. Station presets and GPIO functions are
programmed using any standard Web browser. Occupies 1 frame
position.
P/N 2001-30255 HW 1.045,00
IC.1D 20-Station Filmcap Intercom Panel P/N 2001-00271 HW 1.795,00
20-station desktop intercom panel is perfect for producers, screeners, etc.
Can be placed anywhere. 20 LED-backlit film-cap buttons can be labeled
with station names and programmed using a built-in Web interface and
any browser. Features include OLED callback window to permit identifying
and answering multiple calls from any remote stations not programmed on
a local station key, built-in speaker and front -panel 4-pin locking headset
jack, front -panel mic input, and an Ethernet port. Requires one 100Base-
T Ethernet switch port. Autosensing power supply, 90VAC to 240VAC, 50
Hz to 60 Hz. 30 Watts. Measures 13.4 wide x 8.5 deep x 4.5 tall (34.1
cm x 21.6 cm x 11.5 cm).
THUM + MAHR GmbH
D-40789 Monheim am Rhein, Germany
Phone +49-2173-967322 - Fax +49-2173-967400 Stand 01.11.2011 Seite 16 von 22

Beschreibung Part Nummer Key Einzelpreis
IC.20D 20-Station OLED Intercom Panel P/N 2001-20272 HW 2.990,00
20-station desktop intercom panel is perfect for producers, screeners, etc.
Can be placed anywhere. 20 station presets with OLED displays can be
programmed to display frequently-called stations on the fly, or by using the
built-in Web interface and any browser. Features include an OLED
callback window that permits identification and full communication with
any remote stations not programmed on a preset key, built-in speaker and
front-panel 4-pin locking headset jack, frontpanel mic input, and an
Ethernet port. Requires one unused 100Base-T Ethernet switch port. Autosensing
power supply, 90VAC to 240VAC, 50 Hz to 60 Hz. 30 Watts.
Measures 18.2 wide x 5.9 deep x 5.6 tall (46.3 cm x 15 cm x 14.25 cm).
Axia SoftCom Intercom for Windows Site License P/N 3001-00048 SW 1.195,00
Make any networked PC a part of your IP-Intercom system! Simple user
interface mimics control panel of IC-20 rack unit, with preset locations for
20 frequently-called stations. Auto-answer and hands-free functions are
provided. Easy drop-down station finder gives instant access to stations
not pre-programmed. Site license SoftCom may be installed on any or
every PC in your local facility for one purchase price. Software requires a
PC with Ethernet connection, sound card and mic/earphone headset,
running Windows XP or higher, with 20MB free disc space.
Analog Line Node P/N 2001-20133 HW 2.795,00
The Analog line node has eight balanced stereo inputs and eight balanced
stereo outputs, presented on easy-to-install RJ-45 connectors. The inputs
are switchable to accommodate consumer level -10dBv or professional
level +4dBu. The short-circuit protected outputs are capable of delivering
up to +24 dBu before clipping. Create an Ethernet audio snake with Axia
Analog Audio Nodes at each end (or mix and match digital, microphone
and analog line terminals), a single 100Base-T link can be used to send
and receive 8 stereo audio channels, eliminating old-fashioned multi-pair
cable. Superior performance specs include 102dB of dynamic range,

Beschreibung Part Nummer Key Einzelpreis
Microphone Node P/N 2001-20136 HW 2.795,00
The Microphone Node has eight phantom-powered mic inputs. It also
contains eight balanced stereo analog line outputs for convenient delivery
of associated headphone and studio monitor feeds to the room in which
the mics are located. The inputs are on XLR connections while the
outputs are on RJ-45. The Axia Microphone Node can also be used as a
multiple-input mic preamp and A/D converter or as the stage-end of a
digital snake. Specs that would shame a $200,000 recording console,
such as EIN of < -128dB and THD of

Beschreibung Part Nummer Key Einzelpreis
Axia SoftSurface Virtual Console Software NEW P/N 3001-00049 SW 995,00
New Axia SoftSurface gives you powerful real-time remote control of your
Axia Element 2.0 mixing console! With SoftSurface, you can operate your
Element from any PC connected to the Livewire network. Or, pair
SoftSurface with an Axia StudioEngine to create a virtual console that you
can control from remotes, transmitter sites even from home.
SoftSurface makes an ideal companion for existing consoles; it s also the
perfect audio mixing solution for limited-space locations. SoftSurface
remotely controls any physical Element console, and pairs with Axia
StudioEngine as a Virtual Console. Compatible with Windows Windows 7
operating systems; 20Mb free disc space required.
Axia SoftCom Intercom for Windows Site License P/N 3001-00048 SW 1.195,00
Make any networked PC a part of your IP-Intercom system! Simple user
interface mimics control panel of IC-20 rack unit, with preset locations for
20 frequently-called stations. Auto-answer and hands-free functions are
provided. Easy drop-down station finder gives instant access to stations
not pre-programmed. Site license SoftCom may be installed on any or
every PC in your local facility for one purchase price. Software requires a
PC with Ethernet connection, sound card and mic/earphone headset,
running Windows XP or higher, with 20MB free disc space.
iProFiler Automated Program Archiving P/N 3001-00033 SW 1.395,00
Axia version of popular Telos ProFiler logging software lets you
simultaneously capture up to 24 stereo audio channels to time-stamped
MP3 audio logs directly from your Axia IP-Audio network no audio
cards required. CD-ROM includes software to record, manage and play
back archived audio files. Recording software runs under Windows XP
and later; playback software runs under Windows NT, Windows 2000,
Windows 98 or Windows XP and later. Record mode can be set for
logging, skimming, or combination of both. Logged audio may be
auditioned remotely via LAN, WAN, or Internet, if you choose. Minimum
hardware requirements: Pentium-IV, 2.4GHz processor (or equivalent)
with 512Mb RAM, 300Gb free hard-drive space (enough to continuously
archive 24 64kbps streams for two weeks) and a 100Base-T NIC.
iProbe Network Management Software P/N 3001-00040 SW 1.195,00
iProbe is an intelligent network maintenance and diagnostics tool that
makes managing, updating, and remote controlling your Axia system
easier than ever. There s a powerful auto-documentation feature that
generates configuration docs for every device. The Organizer lets you
group Audio Nodes into logical groups for easy management, upload
software to single or multiple devices, make device configuration backups
and more all from the comfort of your office. Requires P2-400 MHz (or
greater) PC, with 10/100 or 100/1000 Ethernet NIC running Windows
2000 or XP.
Axia IP-Audio Driver for Windows 1 input, 1 output P/N 3001-00017 SW 225,00
The Axia Windows® Driver connects PC audio directly to the network via
Ethernet and without sound cards. This software works with delivery
systems and editors that support standard Windows audio. Provides one
stereo input and one stereo output via the Livewire network.
THUM + MAHR GmbH
D-40789 Monheim am Rhein, Germany
Phone +49-2173-967322 - Fax +49-2173-967400 Stand 01.11.2011 Seite 19 von 22

Console Service
Kits
Beschreibung Part Nummer Key Einzelpreis
Axia IP-Audio Driver for Windows 24 inputs, 24 outputs P/N 3001-00024 SW 1.195,00
Multi-channel version of 3001-00017 (above) supports 24 stereo inputs
and 24 stereo outputs via the Livewire network, connecting PC audio
directly to the network via Ethernet and without sound cards.
Axia IP-Audio Driver for Linux 24 inputs, 24 outputs P/N 3001-00047 SW 1.195,00
Multi-channel IP-Audio Driver for Axia users with Linux-based software
delivery systems. Supports 24 stereo inputs and 24 stereo outputs via the
Livewire Network, connecting PC audio directly to the network via
Ethernet and without sound cards.
iPlay Network Stream Player for Windows P/N 3001-00023 SW 95,00
Software-based IP-Audio monitoring program lets Windows® PC users
select and listen to any audio source available to their Axia network. Eight
user-programmable preset buttons for quick access to frequently
accessed channels; on-screen level display meters auditioned audio.
Requires P2-400 MHz (or greater) PC, with 10/100 or 100/1000 Ethernet
NIC running Windows 2000 or XP.
Configuration, Training & Network Design per day + expenses *P/N 4000-00014 SW 1.359,00
Axia IP-Audio networks are easy to set up and configure, saving you
significant time and money during installation. However, some clients
prefer to have us assist them during their first installation; for Euro
1.195,00 per day plus expenses*, an Axia support expert is available to
assist with on-site network design, hardware/software configuration and
equipment training sessions.
*Expenses include but are not limited to travel, lodging and meals.
Element Deluxe Spares Kit P/N 2011-00052 HW 345,00
Comprehensive set of spare parts for the Axia Element includes:
(1) Conductive Plastic Fader Assembly consisting of:
(1) Fader
(1) Cable
(1) Element Fader Knob
(2) Element Fader Knob
(3) 1/2" Rotary Encoder Caps (for SoftKnobs & Studio Monitor knobs)
(3) 3/4" Rotary Encoder Caps (for CR Monitor knobs & Scrub Wheel)
(1) Element CR Monitor/HP Volume Rotary Encoder
(1) Element SoftKnob Rotary Encoder
(1) Element 5-volt Power Brick
THUM + MAHR GmbH
D-40789 Monheim am Rhein, Germany
Phone +49-2173-967322 - Fax +49-2173-967400 Stand 01.11.2011 Seite 20 von 22

Beschreibung Part Nummer Key Einzelpreis
Element Maintenance Spares Kit P/N 2011-00053 HW 245,00
Maintenance parts kit for the Axia Element includes:
(1) Conductive Plastic Fader Assembly consisting of:
(1) Fader
(1) Cable
(1) Element Fader Knob
(2) Element Fader Knob
(3) 1/2" Rotary Encoder Caps (for SoftKnobs & Studio Monitor knobs)
(3) 3/4" Rotary Encoder Caps (for CR Monitor knobs & Scrub Wheel)
(1) Element CR Monitor/HP Volume Rotary Encoder
Element Power Supply/CPU/GPIO Spares Kit P/N 2011-00054 HW 945,00
Spare parts kit for the Element Power Supply/CPU includes:
(1) Element CPU Power Supply
(1) Element 3.2-volt Power Brick
(1) Element 5-volt Power Brick
(1) VIA EPIA ME 6000 Mainboard
(1) 2 Port set of Opto's 4N36 and Solid State Relays HSR312L IC's
iQ Radius Maintenance Spares Kit P/N 2011-00070 HW 85,00
Maintenance parts kit for the iQ console includes:
(1) Conductive Plastic Fader Assembly consisting of:
(1) Fader
(1) Cable
(1) Fader Knob
(2) Fader Knob
iQ Control Surface Circuit Board Replacements
IQ Meter Board + OLED Displays
iQ Control Surface Circuit Board Replacements
IQ / Radius Logic Mainboard
iQ Control Surface Circuit Board Replacements
IQ / RadiusFront-Panel Control Board
QOR.32 Spares
48-Volt Power Supply
Main internal power supply
QOR.32 Spares
Mainboard
Lower main circuit board
QOR.32 Spares
Audio/GPIO Board
Logic & Audio I/O riser board
P/N 1701-00268-
100
P/N 1701-00265-
100
P/N 1701-00262-
100
P/N 1281-00079-
100
P/N 1701-00271-
100
P/N 1701-00272-
100
HW 309,00
HW 309,00
HW 619,00
HW 295,00
HW 829,00
HW 519,00
THUM + MAHR GmbH
D-40789 Monheim am Rhein, Germany
Phone +49-2173-967322 - Fax +49-2173-967400 Stand 01.11.2011 Seite 21 von 22

Beschreibung Part Nummer Key Einzelpreis
IQ/Radius Maintenance Spares Kit P/N 2011-00070 HW 85,00
Maintenance parts kit includes:
(1) Conductive Plastic Fader Assembly consisting of:
(1) Fader
(1) Cable
(1) Fader Knob
(2) Fader Knob
Radius Control Surface Circuit Board Replacements
Radius Meter Board + LED Displays
iQ Control Surface Circuit Board Replacements
IQ / Radius Logic Mainboard
iQ Control Surface Circuit Board Replacements
IQ / Radius Front-Panel Control Board
QOR.16 Spares
48-Volt Power Supply
Main internal power supply
QOR.16 Spares
Mainboard
Main circuit board
P/N 1701-00270-
100
P/N 1701-00265-
100
P/N 1701-00262-
100
P/N 1281-00079-
100
P/N 1701-00271-
100
Es gelten die Allgemeinen Geschäftsbedingungen (AGB) der Thum + Mahr GmbH. Alle genannten Preise
verstehen sich in EURO und zzgl. der bei Rechnungsstellung gültigen gesetzlichen Mehrwertsteuer. Die
Lieferung erfolgt ab Werk Monheim. Die Gegenstände der Lieferung (Vorbehaltsware) bleiben bis zur Erfüllung
sämtlicher ihr gegen den Auftraggeber zustehenden Ansprüche Eigentum der Thum + Mahr GmbH.
HW 309,00
HW 309,00
HW 619,00
HW 295,00
HW 829,00
THUM + MAHR GmbH
D-40789 Monheim am Rhein, Germany
Phone +49-2173-967322 - Fax +49-2173-967400 Stand 01.11.2011 Seite 22 von 22