V-Belts - Houston Bearing and Supply

ToolsSpring Loaded Tensiometer for V-BeltsSingle Stem Part Number — 102761Double Stem Part Number — 105575Triple Stem Part Number — 105576Uses a tensioning method based on the principle that the force required to deflect a given span length by a givenamount is related to the tension in the belt. For use with v-belts or synchronous belts.Proper tensioning of v-belts is the single most important factor necessary for long, satisfactory operation. Too littletension will result in slippage, causing rapid belt and sheave wear. Too much tension can result in excessive stresson belts, bearings, and shafts.Single Stem TensiometerP/N 102761Double StemTensiometerP/N 105575Triple StemTensiometerP/N 1055576V-Belt Tensioning DevicePart Number – 108039-A.Introducing a new tensioning tool from Carlisle Power Transmission– a simple, easy and accurate alternative for tensioning of individual belts or v-bands.• No measurements• No math• No computers• No O-ringsIt’s practicalIt’s reusableIt’s easy for the installerIt works!Note: Not for use with Aramid Fiber or Glass Fiber reinforced belts160