V-Belts - Houston Bearing and Supply

PulleysClassical QD PulleysClassical QD Pulleys are easy tomount and easy to remove. Theystay tight and run true. Stock QDPulleys and Bushings conform tostandardized QD dimensions andto industry standard pulley grooves.Available in A, B, C, D cross-section.Pulleys are made of highgrade semi-steel closely machinedto industry standard tolerances withclose static balance.For Use With:A, AP, AX, B, BP, BX,C, CP, CX, DP, DXClassical Section V-BeltsBQ Sheaves — For use with AX — BX — AP — BP — A — B belt cross sectionsCLASSICAL QD SHEAVES (BQ)Weight (lbs.)Part OutsideDatum Diameter LessNo Diameter A B Bushing BushingBQ Sheaves — For use with AX — BX — AP — BP — A — B belt cross sectionsCLASSICAL QD SHEAVES (BQ)Weight (lbs.)Part OutsideDatum Diameter LessNo Diameter A B Bushing Bushing1 Groove Face Width (F) = 7/8" for 3.75" thru 7.15" and 1" for 7.35" and Over1BQ34 3.75 3.00 3.40 1.2 SH1BQ36 3.95 3.20 3.60 1.3 SH1BQ38 4.15 3.40 3.80 1.6 SH1BQ40 4.35 3.60 4.00 1.8 SH1BQ42 4.55 3.80 4.20 2 SH1BQ44 4.75 4.00 4.40 2.2 SH1BQ46 4.95 4.20 4.60 2.4 SDS1BQ48 5.15 4.40 4.80 2.6 SDS1BQ50 5.35 4.60 5.00 2.8 SDS1BQ52 5.55 4.80 5.20 3.1 SDS1BQ54 5.75 5.00 5.40 3.4 SDS1BQ56 5.95 5.20 5.60 3.6 SDS1BQ58 6.15 5.40 5.80 3.9 SDS1BQ60 6.25 5.60 6.00 4.1 SDS1BQ62 6.55 5.80 6.20 4.5 SDS1BQ64 6.75 6.00 6.40 3.8 SDS1BQ66 6.95 6.20 6.60 4.3 SDS1BQ68 7.15 6.40 6.80 4.4 SDS1 Groove Face Width (F) = 7/8" for 3.75" thru 7.15" and 1" for 7.35" and Over1BQ70 7.35 6.60 7.00 5 SDS1BQ74 7.75 7.00 7.40 5.1 SDS1BQ80 8.35 7.60 8.00 5.6 SDS1BQ86 8.95 8.20 8.60 6.2 SDS1BQ94 9.75 9.00 9.40 6.5 SDS1BQ110 11.35 10.60 11.00 9 SDS1BQ124 12.75 12.00 12.40 9.9 SDS1BQ136 13.95 13.20 13.60 13.4 SDS1BQ154 15.75 15.00 15.40 18.5 SK1BQ160 16.35 15.60 16.00 18.2 SK1BQ184 18.75 18.00 18.40 20.7 SK1BQ200 20.35 19.60 20.00 23.7 SK2 Grooves Face Width (F) = 1-3/4"2BQ34 3.75 3.00 3.40 2.5 SH2BQ36 3.95 3.20 3.60 2.7 SH2BQ38 4.15 3.40 3.80 3.2 SH2BQ40 4.35 3.60 4.00 2.9 SH103