Pneumatic cylinders - Duncan Rogers

P1DCylinderStandard strokeStandard strokes for all P1D cylinders comply with ISO 4393. (* 40 is not an ISO standard stroke)Special strokes up to 2800 mm.Minimum stroke for P1D Clean is 25 mm with 0-2 sensors and 100 mm with 3-4 sensors.Order no Cylinder bore = Standard stroke (mm) = Stroke to special orderXXXX = Stroke (mm) 25 40 50 80 100 125 160 200 250 320 400 500 600 700 800 2800Double actingProfile cylinderP1D-S032MS-XXXX 32P1D-S040MS-XXXX 40P1D-S050MS-XXXX 50P1D-S063MS-XXXX 63P1D-S080MS-XXXX 80P1D-S100MS-XXXX 100P1D-S125MS-XXXX 125Operation dataWorking pressureMax 10 barWorking temperature min maxStandard -20 °C +80 °CHigh temp version -10 °C +150 °CLow temp version -40 °C +40 °CBores and strokesP1D32 - 125 mmStandard strokes 25 - 500 mm according to ISO 4393Max stroke2800 mmMin stroke, P1D Clean 25 mm (0-2 sensors)100 mm (3-4 sensors)Greased for life, does not normally need additional lubrication. If extralubrication is given, this must always be continued.Working medium, air qualityWorking mediumDry, filtered compressed airto ISO 8573-1 class 3.4.3.Recommended air quality for cylindersFor best possible service life and trouble-free operation, ISO 8573-1quality class 3.4.3 should be used. This means 5 µm filter (standardfilter) dew point +3 ºC for indoor operation (a lower dew point shouldbe selected for outdoor operation) and oil concentration 1.0 mg oil/m 3 ,which is what a standard compressor with a standard filter gives.P1D CleanProtection classChemical resistanceHose-proof in accordance with IP65Tested for normally used industrialdetergents, both acid and alkalineISO 8573-1 quality classesQuality Pollution Water Oilclass particle max con- max. press. max consizecentration dew point centration(µm) (mg/m³) (°C) (mg/m³)1 0,1 0,1 -70 0,012 1 1 -40 0,13 5 5 -20 1,04 15 8 +3 5,05 40 10 +7 256 - - +10 -Important!If the cylinder is used in applications withsignificant lateral loads on the piston rod,an external guide must be used to achievemaximum service life. See the examples onpages 52-55.1806.05www.parker.com/euro_pneumatic