WSM Reference Guide - WatchGuard Technologies

WSM Reference Guide - WatchGuard Technologies WSM Reference Guide - WatchGuard Technologies

watchguard.com
from watchguard.com More from this publisher
12.07.2015 Views

Firebox® X Edge Log MessagesModuleMessageTypeMessage TextDescriptionMONITOR Error Unable to save config file -insufficient space on deviceThere is not enough space on the RAMdrive to store the configuration file.MONITOR Error Unable to store license file An internal error ocurred while storingthe license key.MONITOR Error [string] is disconnected from thenetwork.MONITOR Information [string] is connected to the networkat [number] Mbps [string] duplex.MONITOR Error No license has been installed so only1 IP address is allowed to access theexternal network. ContactWatchGuard support to obtain alicense for this device.MONITOR Error The license for the [string] featurehas expired and has been disabledMONITOR Error No firmware updates are allowedbecause the LiveSecuritysubscription has expired.The specified port is no longer connectedto the network.The specified port is now connected tothe network at the specified speed.No license has been installed so only 1 IPaddress is allowed to access the externalnetwork. Contact WatchGuard support toobtain a license for this device.The license for the specified feature hasexpired.No firmware updates are allowed oncethe LiveSecurity subscription has expired.NAT Error Translation pool exhausted The maximum number of activeconnections through the firewall is at itslimit.NAT Error User count exceeded, packetdroppedThe maximum number of users allowedthrough the firewall is at its limit.NAT Error IPSEC packet with zero SPI discarded An ESP IPSEC packet was discardedbecause of an illegal SPI value (zero.NAT Error Discard IPSEC packet to [ip address] -still waiting for response for [ipaddress]NAT Information IPSEC NAT timeout: gateway [ipaddress] client [ip address]NAT Information IPSEC NAT IKE timeout: client [ipaddress]An IPSEC packet was discarded becauseanother client is currently establishing aconnection.An established IPSEC connection endedbecause it timed out.A established NAT-d IPSEC connectiontimed out and was terminated.NAT Warning Default The packet was discarded because it didnot match any of the existing NATconnections.NAT Warning Session terminated by administratorfor host [ip address]NAT Warning Session terminated by periodicautomatic time-out for host [ipaddress]An administrator terminated all NATsessions via the GUI.All NAT sessions were termianted becausethe configured time was reached.PPP Error PPP negotiation failed during LCP PPP negotiation failed in the initial state(LCP).PPP Error Authentication failure, verifyusername and passwordPPP Error PPP server rejected static IP in IPCPnegotiationThe supplied username and passwordwere rejected by the remote site.PPP server rejected static IP in IPCPnegotiation.64 WatchGuard System Manager

Firebox® X Edge Log MessagesModuleMessageTypeMessage TextDescriptionPPP Error PPP IP configuration error PPP negotiation failed in the IPCP state.PPP Information Login Successful The PPP connection was established.PPP Information Negotiating IP settings The PPP client is starting the IPCP phase.PPP Information CHAP Authentication The PPP client is starting CHAPauthentication.PPP Information PAP Authentication The PPP client is starting PAPauthentication.PPP Information Starting login The PPP client is starting the LCP phase.PPP Error PPPOE started by packet The packet was discarded because it wasnot for our current PPPOE session.PPP Error Cannot start PPPOE until pppconfiguration is updatedA new PPP connection cannot beestablished because the username andpassword were previously rejected by theserver and were not updated.PPPoE Error Unable to locate PPPoE server A PADI request was sent to the PPPOEserver, but received no reply.PPPoE Error Timeout communicating with PPPoEserverA PADR request was sent to the PPPOEserver, but received no reply.PPPoE Information PPPoE service established A PPPOE Session has been established.PPPoE Warning Timeout locating PPPoE server, willretryPPPoE Warning Incorrect session number in PPPoEpacketNo reply was received by the PPPOEclient. The request is being sent again.A PPPOE packet was received for adifferent PPPOE client session .PPPoE Warning PPPoE session terminated by remote The PPPOE server terminated the currentsession.PPPoE Warning PPPoE connection terminated, noactivityPPPoE Warning PPPoE connection terminated,service unavailablePPPoE Warning PPPOE response received withincorrect AC or ServiceNameThe PPPOE connection was idle for theconfigured limit and will be terminated.An LCP ECHO request was sent to theserver but no reply was received.Restarting the link.A PADO packet from the server wasignored because of the service name didnot match our name.SMTP Error Unable to create message queue There was an error adding a new messageto the SMTP logging queue.SMTP Error Unable to allocate memory for mailmessageSMTP Error Missing required config props forSMTPSMTP Error Unable to connect to SMTP host(error [number])SMTP Error Error reading from SMTP server (error[number])There was an error allocating memory forSMTP logging.The SMTP logging client is missingrequired configuration information.The SMTP logging client cannot establisha connection to the specified server.The SMTP logging client had an errorcommunicating with the specified server.Reference Guide 65

Firebox® X Edge Log MessagesModuleMessageTypeMessage TextDescriptionPPP Error PPP IP configuration error PPP negotiation failed in the IPCP state.PPP Information Login Successful The PPP connection was established.PPP Information Negotiating IP settings The PPP client is starting the IPCP phase.PPP Information CHAP Authentication The PPP client is starting CHAPauthentication.PPP Information PAP Authentication The PPP client is starting PAPauthentication.PPP Information Starting login The PPP client is starting the LCP phase.PPP Error PPPOE started by packet The packet was discarded because it wasnot for our current PPPOE session.PPP Error Cannot start PPPOE until pppconfiguration is updatedA new PPP connection cannot beestablished because the username andpassword were previously rejected by theserver and were not updated.PPPoE Error Unable to locate PPPoE server A PADI request was sent to the PPPOEserver, but received no reply.PPPoE Error Timeout communicating with PPPoEserverA PADR request was sent to the PPPOEserver, but received no reply.PPPoE Information PPPoE service established A PPPOE Session has been established.PPPoE Warning Timeout locating PPPoE server, willretryPPPoE Warning Incorrect session number in PPPoEpacketNo reply was received by the PPPOEclient. The request is being sent again.A PPPOE packet was received for adifferent PPPOE client session .PPPoE Warning PPPoE session terminated by remote The PPPOE server terminated the currentsession.PPPoE Warning PPPoE connection terminated, noactivityPPPoE Warning PPPoE connection terminated,service unavailablePPPoE Warning PPPOE response received withincorrect AC or ServiceNameThe PPPOE connection was idle for theconfigured limit and will be terminated.An LCP ECHO request was sent to theserver but no reply was received.Restarting the link.A PADO packet from the server wasignored because of the service name didnot match our name.SMTP Error Unable to create message queue There was an error adding a new messageto the SMTP logging queue.SMTP Error Unable to allocate memory for mailmessageSMTP Error Missing required config props forSMTPSMTP Error Unable to connect to SMTP host(error [number])SMTP Error Error reading from SMTP server (error[number])There was an error allocating memory forSMTP logging.The SMTP logging client is missingrequired configuration information.The SMTP logging client cannot establisha connection to the specified server.The SMTP logging client had an errorcommunicating with the specified server.<strong>Reference</strong> <strong>Guide</strong> 65

Hooray! Your file is uploaded and ready to be published.

Saved successfully!

Ooh no, something went wrong!