WSM Reference Guide - WatchGuard Technologies

Event LogsEvent Log Message CatalogLog Module Log Message ID MessageDVCPCD 1041 The Firebox cannot get certificates from this server %s, %sDVCPCD 1042 The Firebox is importing the CA certificateDVCPCD 1043 The Firebox cannot import the CA certificateDVCPCD 1044 The Firebox imported the CA certificateDVCPCD 1045 The Firebox is importing the VPN certificateDVCPCD 1046 Cannot import the VPN certificateDVCPCD 1047 Successfully imported the VPN certificateDVCPCD 1050 Cannot load configuration (export xml config)DVCPCD 1051 Requesting new configuration from server %sDVCPCD 1052 Cannot download configuration from server %s, %sDVCPCD 1053 Cannot save this new configuration: %sDVCPCD 1054 The new configuration was savedHAM 0 The HA manager is initialized and enabledHAM 2 The Firebox is now in active modeHAM 4 The Firebox starts with HA disabledHAM 7 Firebox restart completed and HA is now readyHAM 20 The Configuration manager sets HA manager with invalid HA type: %dHAM 107 HA: The Firebox did not complete the secure transport channel process(error: %s)HAM 108 Secure channel is dropped! (error:%s)HAM 110 TCP connection was broken! (error:%s)HAM 214 HA: Received a fail notification from peer (error:%s)HAM 218 HA: Start the forced failover process (error:%s)HAM 222 HA:The hotsync procedure failed (error:%s)HAM 231 HA: The secure channel was not set (rc=%d)HAM 232 HA: Mismatched HA peer information (error:%s)HAM 233 HA: The peer Firebox is upgrading. Need to takeover!HAM 234 HA event monitor is enabled and the system starts from the WAITADMINstateHAM 301 HA: The HA link is down on port %dHAM 302 HA: The Firebox is misssing the MIA heartbeatHAM 304 HA: The Firebox will failover because (%s). Info=%dHAM 307 HA: The Firebox is now active because of peer restarts or because peer isunavailableHAM 308 HA: The Firebox is in standby modeHAM 310 HA: Process the forced failover commandIKE 0 There is no CA Certificate available for the certificate payload buildIKE 1 Cannot convert the CA name from DER to X509IKE 2 Certificate chain forming failure because there is no matching certificateReference Guide 49