T1617 Halyard Aquadrive No2 ID2.indd

More documents

Recommendations

Info

AQUADRIVE AS DRIVE SHAFTSTHE ONLY DRIVE SHAFT IN THEWORLD WITH FREE END FLOATAquadrive special drive shafts canbe used to connect Jet drives, Vdrives, thrusters and stern-drives.They remove vibration and takeout misalignment in just the sameway as the complete Aquadrive,but they have one huge advantageover rubber jointed drive shaftsand older universally jointed units– they allow the engine to vibratefreely fore and aft.No more vibration transmissionthrough rubber joints. No more ofthe torsional lock-up to be foundon shafts with sliding splines in thecentre. Just give us details of thecraft, power, and length and we’ll dothe rest.Aquadrive CVT systemsare designed for use where thereis no gearbox, and no drive plateto absorb the engine’s torsionalvibration. All the same advantages asa complete Aquadrive, and the sameunique free end float which no otherdrive shaft can offer.Aquadrive triplejoint shafts have a third joint anda support bearing partway alongtheir length. These specialised driveshafts allow total lengths of up to 9mfor installations where flexibility ofengine positioning is the key.Aquadrive extended shaftsup to 2 metres long, allowing majorengine position changes.6
AQUADRIVE ENGINE MOUNTSCOMPLIMENTING THE AQUADRIVE’SFLEXIBILITYWhat makes a mountgood – and safe?•Only natural rubber isused. Each size of mount ismanufactured with up to fourdifferent rubber stiffness grades.•The steel hood covers thewhole top of the mount, reducingthe risk of diesel attacking thenatural rubber.•The mount is “fully captive”.Even if the engine turns overand the rubber elements rip, theengine is held tight.The bolt holes are slotted•one way at each end so you canadjust their position.50210 mountsThe baby of the range. 38mmhigh with a 12mm stud. Fourrubber grades are available forweights up to 60kgs.The Aquadrive system creates free movement betweenthe engine and the shaft. One result is that the engine’smountings can be much softer than normal, partlybecause the engine can vibrate freely relative to theshaft, and partly because no propeller thrust reaches themounts and strains them forwards. Aquadrive enginemounts are used with engines of four cylinders or more,and our expert staff will rapidly select the correct rubberstiffness for the machinery involved.502405023050220 mountsThe most versatile mount ever,taking weights up to 200kgs ormore and available with fivedifferent rubber grades. Themount is 50mm high, with a16mm stud.50230 mountsThe big one. 68mm high with a20mm stud, the 50230 comes inthree rubber grades and will takeweights up to 700kgs.50240 mountsThe Giant. 110mm high andsecured with four bolts, the50240 has a 24mm stud andcomes in four rubber gradestaking up to almost 3000kgs.5022050210TrademarksModuline and Aquadrive areregistered trade marks.7
Page 1 and 2: Quietvibration-freeperformance from
Page 3 and 4: AQUADRIVE TO SUITALL ENGINESModulin
Page 5: WHAT’S INSIDE AN AQUADRIVE?The Aq

T1617 Halyard Aquadrive No2 ID2.indd

Create successful ePaper yourself

Delete template?

Save as template?