FlexPendant Operators Manual 3HAC16590 ... - Technology

3 Get started3.2.3. Connecting a PC to the service portContinuedConnecting a pc to the service portStep Action Illustration1. Make sure the network setting on thePC to be connected is correct.2. Use the delivered category 5 Ethernetcrossover boot cable with RJ45connectors.3. Connect the network cable to thenetwork port of your PCRefer to the system documentation foryour PC, depending on the operativesystem you are running.The PC must be set to “Obtain an IPaddress automatically”.The cable is delivered in the RobotWareproduct box.xx0400000844• A: network portThe placement of the network port mayvary depending on the pc model.4. Connect the boot cable to the serviceport, placed on the control module front.3HAC 16590-1 Revision: B53