FlexPendant Operators Manual 3HAC16590 ... - Technology

1 Safety1.5.3. Handling of FlexPendant1.5.3. Handling of FlexPendantGeneral instructionsThe FlexPendant is a high-quality handheld terminal equipped with highly sensitive state-ofthe-artelectronics. To avoid malfunctions or damage through improper handling, followthese instructions during operation.The FlexPendant may only be used for the purposes mentioned in this manual. TheFlexPendant was developed, manufactured, tested and documented in accordance withapplicable safety standards. If you follow the instructions regarding safety and use asdescribed in this manual, the product will, in the normal case, neither cause personal injurynor damage to machinery and equipment.CAUTION!• Turn off the power supply before opening the cable entrance area of the FlexPendant.Otherwise the components could be destroyed or undefined signals could occur.• Make sure that nobody trips over the cable to prevent the device from falling to theground.• Take care not to squeeze and thus damage the cable with any object.• Do not lay the cable over sharp edges since this can damage the cable sheath.• When not using the device, hang it on the wall bracket provided for storage.• Never use sharp objects (e.g. screwdriver) for operating the touch screen. This coulddamage the touch screen.CAUTION!A disconnected FlexPendant should be stored in such a way that it cannot be mistaken forbeing connected to the controller.Waste disposalObserve the national regulations when disposing of electronic components! When replacingcomponents equipped with batteries, please dispose of used batteries properly!Foreseeable misuse of enabling deviceForeseeable misuse means that it is not allowed to fixate the enabling device in the enablingposition. The foreseeable misuse of the enabling device must be restricted.When releasing and then pressing the enabling device again, make sure to wait for the systemto go to Motors Off state before pressing again. Otherwise you will receive an error message.3HAC 16590-1 Revision: B33