FlexPendant Operators Manual 3HAC16590 ... - Technology

10 Systems10.3.6. Restart and delete programs and modules (P-start)10.3.6. Restart and delete programs and modules (P-start)What happens with my current system?After restart the system’s state will be resumed except for manually loaded programs andmodules. Static and semistatic tasks are started from the beginning, not from the state theyhad when the system was stopped.Modules will be installed and loaded in accordance with the set configuration. Systemparameters will not be affected.Restart and delete programs and modulesThis section describes how to restart and delete user loaded programs and modules.StepAction1. On the ABBmenu, tap Restart.The restart dialog is displayed.2. Tap Advanced... to select restart method.The select restart method dialog is displayed.3. Tap P-start, then tap OK.A dialog letting you confirm that you really want to restart is displayed.4. Tap P-start to restart the controller.The controller is restarted using the current system. After the startup procedureno programs or modules are open.2603HAC 16590-1 Revision: B