FlexPendant Operators Manual 3HAC16590 ... - Technology

10 Systems10.3.4. Restart and select another system (X-start)10.3.4. Restart and select another system (X-start)What happens with my current system?The current system will be stopped.All system parameters and programs will be saved to an image file, so that the system’s statecan be resumed later.Restart and select another systemThis section describes how to restart and select another system.Step Action Info1. Make sure the power to the controllercabinet is switched on.2. On the ABBmenu, tap Restart.The restart dialog is displayed.3. Tap Advanced... to select restartmethod.The select restart method dialog isdisplayed.4. Tap X-start, then tap OK.A dialog letting you confirm that youreally want to restart is displayed.5. Tap X-Start to restart the controller.The controller is restarted. After thestartup procedure the boot application isstarted.6. Use the boot application to selectsystem.7. Tap Close, then OK to return to the bootapplication.8. Tap Restart to restart the controllerusing the selected system.How to use the boot application isdetailed in Using the boot application onpage 254.2583HAC 16590-1 Revision: B