FlexPendant Operators Manual 3HAC16590 ... - Technology

10 Systems10.3.2. Using the boot applicationContinuedStep Action Info4. Tap Service PC information to display networksettings to be used when connection a service PCto the controller’s service port.5. Tap FlexPendant to display FlexPendant softwareversions.Tap Advanced to display the boot loader version.Selecting systemStep Action Info1. You may reach the boot application by performingan X-start.2. In the boot application, tap Select System.A dialog box is displayed showing the availableinstalled systems.3. Tap the system to be selected and then Select.The selected system is displayed in the boxSelected System.4. Tap Close.A dialog box is shown urging you to restart to beable to use the selected system.How to perform an X-start isdetailed in section Restartand select another system(X-start) on page 258.Restarting controllerStep Action Info1. You may reach the boot application by performingan X-start.2. In the boot application, tap Restart System.A dialog box is displayed specifying the selectedsystem.3. Tap OK to restart using the selected system orCancel to abort.How to perform an X-start isdetailed in section Restartand select another system(X-start) on page 258.2563HAC 16590-1 Revision: B