FlexPendant Operators Manual 3HAC16590 ... - Technology

8 Handling inputs and outputs, I/O8.2. Simulating and changing signal values8.2. Simulating and changing signal valuesSimulating and changing signal valuesA signal can be changed into a simulated signal and the value of the signal can be changed.More information on how to change the signal’s properties is described in the section ControlPanel, Configuring Most Common I/O on page 289.StepAction1. On the ABB menu, tap I/O.A list of most common signals is displayed. See section Configuring MostCommon I/O on page 289.2. Tap on a signal.3. Tap on Simulate to change the signal into a simulated signal.Tap on Remove Simulation to remove the simulation from the signal.4. Tap on 123... to change the signal’s value.The soft numeric keyboard is displayed. Enter the new value and tap OK.2383HAC 16590-1 Revision: B