FlexPendant Operators Manual 3HAC16590 ... - Technology

6 Programming and testing6.10.4. Service Information System, ServiceInfo service routine6.10.4. Service Information System, ServiceInfo service routineServiceInfoServiceInfo is a service routine based on Service Information System, SIS, a softwarefunction which simplifies maintenance of the robot system. It supervises the operating timeand mode of the robot, and alerts the operator when a maintenance activity is scheduled.Maintenance is scheduled by setting the system parameters of the type SIS parameters. Howto work with system parameters is described in section Configuring system parameters onpage 270. All system parameters are described in Technical reference manual - Systemparameters. See also the product manual for the robot.Supervised functionsThe following counters are available:• Calender time counter• Operation time counter• Gearbox operation time countersCounters are reset when maintenance has been performed.The counter status is displayed after running the ServiceInfo routine for maintenance. Status“OK” indicates that no service interval limit has been exceeded by that counter.Related informationRunning a service routine on page 209.Configuring system parameters on page 270.The system parameters for SIS are described in Technical reference manual - Systemparameters, chapter Motion.3HAC 16590-1 Revision: B213