Assembly instructions - KLARO GmbH

More documents

Recommendations

Info

Assembly instructions for KLARO retrofit kitsFigure 12). The stainless steel downpipes must be pushed downwards until the curves reston the ground. Care must be taken that the diaphragm discs are aligned horizontally. Whereapplicable, the discs must be readjusted accordingly by rotating the horizontal pipe. Theoutlet lift must be aligned and fixed in such a manner that safe delivery into the outlet of theplant is ensured and that the lift cannot get out of place. Afterwards, the air hoses can beconnected.Figure 6: KLARO Quick ZK with 1 membrane disc,assembled in the two-chamber pitFigure 7: KLARO Quick ZK with 2 membrane discs,assembled in the two-chamber pit6 KLARO GmbH
Assembly instructions for KLARO retrofit kitsFigure 8: KLARO Quick ZK with 1 membrane disc,assembled in the three-chamber pitFigure 9: KLARO Quick DK, assembled in the threechamberpitFeedOutletFeed1Key1 Submerged opening2 Emergency overflow with scum board3 Feed lift4 Diaphragm disc aerator5 Borehole for percussion dowel for fixation6 Excess sludge lift7 Outlet lift at the sampling unit64513274OutletFigure 10: KLARO Quick DK, assembled in a three-chamber pitKLARO GmbH 7
Page 1 and 2: Assembly instructionsfor KLARO retr
Page 3 and 4: Assembly instructions for KLARO ret
Page 5: Assembly instructions for KLARO ret

Assembly instructions - KLARO GmbH

Create successful ePaper yourself

Delete template?

Save as template?