Assembly instructions - KLARO GmbH
Assembly instructions - KLARO GmbH
Assembly instructions - KLARO GmbH
- No tags were found...
Create successful ePaper yourself
Turn your PDF publications into a flip-book with our unique Google optimized e-Paper software.
<strong>Assembly</strong> <strong>instructions</strong> for <strong>KLARO</strong> retrofit kitsFigure 12). The stainless steel downpipes must be pushed downwards until the curves reston the ground. Care must be taken that the diaphragm discs are aligned horizontally. Whereapplicable, the discs must be readjusted accordingly by rotating the horizontal pipe. Theoutlet lift must be aligned and fixed in such a manner that safe delivery into the outlet of theplant is ensured and that the lift cannot get out of place. Afterwards, the air hoses can beconnected.Figure 6: <strong>KLARO</strong> Quick ZK with 1 membrane disc,assembled in the two-chamber pitFigure 7: <strong>KLARO</strong> Quick ZK with 2 membrane discs,assembled in the two-chamber pit6 <strong>KLARO</strong> <strong>GmbH</strong>