Owner's Manual - Roland

Playing in Performance ModeSelecting a PerformanceThe Fantom-X has two performance groups, including the Usergroup and Preset groups, with each group storing 64 performances,for a total of 128 performances.USERThis is the group inside the Fantom-X which can be rewritten.Performances you yourself create can be stored in this group. TheFantom-X contains 64 preset performances.Selecting Performances from theListYou can display a list of performances and select a performance fromthat list.1. Press [LAYER/SPLIT] or [MIXER].2. Press [F5 (Perf List)].fig.08-004_50The Performance List screen appears.PRST (Preset)This is the group inside the Fantom-X which cannot be rewritten.However you may modify the settings of the currently selectedperformance, and then store the modified performance in Usermemory. The Fantom-X contains 64 preset performances.CARD (Memory Card)This group lets you use patches stored on a memory card inserted inthe rear panel PC card slot. Since the data in this group can berewritten, you can use this group to store patches that you create.1. Press [LAYER/SPLIT].2. Press [CURSOR] to move the cursor to the performancegroup.fig.08-003.e3. Turn the VALUE dial, or press [INC]/[DEC] to select aperformance group.USER: UserPRST:CARD:Performance groupPerformance numberPresetMemory Card4. Press [CURSOR] to move the cursor to the performancenumber.3. To switch the performance group, press [F1(⇑)] [F2 (⇓)] tomove the cursor to the performance group tab, and pressor to select the performance.4. Press [F8 (Select)] to close the Performance List screen.Creating a list of frequentlyused Patches andPerformances (the LiveSetting function)You can create a list of frequently used sounds, and recall theminstantly. Since you can register Patches, Rhythm Sets, orPerformances, any type of sound you need can be recalled instantlyregardless of the mode.For details, refer to p. 42.5. Turn the VALUE dial or press [INC]/[DEC] to select theperformance number.99