Owner's Manual - Roland

Playing in Performance ModeFunctions in the PERFORMANCE Layer/Mixer Screenfig.08-002.eMIXER1 screenLAYER screen14 214238 753657119171015161112131114MIXER2 screen181112139Set the volume (LEVEL), pan (PAN), reverb (REV),chorus (CHO), Mute Sw (M), Solo Sw (S) of the part.The setting screen is divided into two screens, andyou can press function button [F6] to switch between them.10 Indicates the keyboard switch on/off.1 Indicates the current sound generating mode.24Indicates the name of the currently selected song,the measure location, the time signature, andthe sequencer status.3 Indicates the Octave Shift (Oct) and the Transpose (Trans).5Indicates multi-effects (MFX), chorus (CHO),reverb (REV) and mastering (MASTER) on and off.Indicates the tempo at which the song,Arpeggio or rhythm pattern is played.Indicates the Loop Play on/off (LOOP).11 Jumps to the setting screen of the displayed parameter.12 Switches the MIXER screen 1 and 2.1314 Scrolls the settings through parts 1-16.15These select the four parts that are controlled by the knobs.The currently selected parts are enclosed by a light green border.Use [CURSOR] ( or ) to select what is to be controlled.Indicates the functions that are assigned to eachrealtime controller knob (●) and assignable switch (■).67MIXER screen: Indicates the group, number, and nameof the selected performance.LAYER screen: Selects the group, number ofthe selected performance.LAYER screen: Displays the patches assigned to the parts.When you switch the current part, the part number willalso change.8 Current Indicates the part.161718This indicates the function that is assigned to the D Beamcontroller, and the response status of the D Beam controller.Indicates the key range in which you can play the keyboardor play rhythm sets.Set the Part Course Tune (Key), Output Assign, Keyboard Sw (K)reverb (REV), Arpeggio Part (A), Pad Part (P) of the part.The setting screen is divided into two screens, andyou can press function button [F6] to switch between them.98