Owner's Manual - Roland

Creating a Rhythm SetTone Pitch Bend Range(Rhythm Tone Pitch Bend Range)Specifies the amount of pitch change in semitones (4 octaves) thatwill occur when the Pitch Bend Lever is moved. The amount ofchange when the lever is tilted is set to the same value for both leftand right sides.Value: 0–48Modifying Waveforms (Wave)fig.07-009_50Tone Receive Expression(Rhythm Tone Receive Expression Switch)For each rhythm tone, specify whether MIDI Expression messageswill be received (ON), or not (OFF).Value: OFF, ONTone Receive Hold-1(Rhythm Tone Receive Hold-1 Switch)For each rhythm tone, specify whether MIDI Hold-1 messages willbe received (ON), or not (OFF).Value: OFF, ONIf “NO SUS” is selected for Env Mode parameter (p. 87), thissetting will have no effect.Tone Receive Pan Mode(Rhythm Tone Receive Pan Mode)For each rhythm tone, specify how pan messages will be received.ValueCONTINUOUS:Whenever Pan messages are received, the stereoposition of the tone will be changed.KEY-ON:The pan of the tone will be changed only when thenext note is played. If a pan message is receivedwhile a note is sounding, the panning will notchange until the next key is pressed.The channels cannot be set so as not to receive Pan messages.One Shot ModeThe sound will play back until the end of the waveform (or the endof the envelope, whichever comes first). The result will be the sameas when the envelope’s Tone Env Mode parameter (p. 87) is set toNO-SUS. If you have set Wave Group (p. 88) to Sample, the loopsetting will be forced to ONE SHOT.Value: OFF, ONAftertouch Time Ctrl Sens (Sensitivity)If Wave Group is set to SAMPLE and Tempo Sync is ON, aftertouchwill control the amount of time stretching/shrinking caused by TimeStretch. If Time Stretch is not being applied, nothing will happen. Ifthe stretch/shrink time will become shorter, and if set to “-” the timewill become longer.Value: -63–+63For details on these settings, refer to “How to make RhythmSet settings” (p. 83).With rhythm tones, sounds are created by combining up to fourWaves (eight for stereo).Tips on Creating a Rhythm ToneThe Waves for the bass drum, snare, hi-hat, toms, and otherpercussion instruments are each assigned to one rhythm tone.When adding 3D effects to the sound, make the Pan settings foreach rhythm tone individually.Wave GroupSelect the groups containing the Waves comprising the rhythm tone.ValueINT:Waveforms stored in internalEXP: Waveform stored in a Wave Expansion Board (SRXseries) installed in EXP slots.SMAP: Sample waveformsMSAM: Multisample waveformsYou cannot select a waveform group of a Wave ExpansionBoard that is not installed.Wave BankSelect the wave bank.ValueWhen the wave group is EXP: A-DWhen the wave group is SAMP: PRST, USER, CARDWhen the wave group is MSAM: USER, CARD88