Owner's Manual - Roland

Creating a Rhythm SetSaving Rhythm Sets You’veCreated (Write)Changes you make to sound settings are temporary, and will be lostif you turn off the power or select another sound. If you want to keepthe modified sound, you must save it in the internal user memory ormemory card.When you edit the patch settings, an “*” will appear in the PatchPlay screen.6. Turn the VALUE dial or use [INC][DEC] and [F2 (⇑)] [F3 (⇓)]to select the write destination and rhythm set number.The write destination can be either the Fantom-X’s internal userarea (User), or a memory card (Card).fig.07-007_50When you perform the save procedure, the data that previouslyoccupied the save destination will be lost.1. Make sure that the Rhythm Set you wish to save is selected.2. Press [WRITE].The WRITE Menu screen appears.fig.07-005_50By pressing [F6 (Compare)] you can check the save-destinationRhythm set (Compare function).7. Press [F8 (Write)].A message will ask you for confirmation.Never switch off the Fantom-X while data is being saved.8. Press [F8 (Exec)] to execute the save operation. To cancelthe operation, press [F7 (Cancel)].* To cancel, press [F7 (Cancel)].Auditioning the Save-DestinationRhythm Set (Compare)3. Press [F2 (Patch/Rhythm)].* Press or to select “Rhythm Edit,” and then press [ENTER].The Rhythm Set Name screen appears.fig.07-006_50Before you save a rhythm set, you can audition the rhythm set whichcurrently occupies the save destination to make sure that it is oneyou don’t mind overwriting. This can help prevent importantrhythm sets from being accidentally overwritten and lost.1. Follow the procedure in “Saving Rhythm Sets You’veCreated (Write)” through step 5 to select the savedestination.2. Press [F7 (Compare)] to light it into red.The Rhythm Compare window appears, making it possible tosound the currently selected save destination rhythm set.fig.07-008.eSave-destinationrhythm set4. Assign a name to the rhythm set.For details on assigning names, refer to “Assigning a Name”(p. 36)5. When you have finished inputting the name, press [F8(Write)].A screen will appear, allowing you to select the writedestinationrhythm set.3. Play the keyboard or pad to sound the save destinationrhythm set, then check whether you really want to overwriteit.The rhythm set auditioned using the Compare function maysound slightly different than when it is played normally.86