Owner's Manual - Roland

Creating a Rhythm SetEditing in a Graphic Display (ZoomEdit)You can edit while viewing a graphic display of the most frequentlyused important parameters.Zoom Edit lets you edit the following parameters.ParameterpagePitch Envelope p. 91TVF p. 92TVF Envelope p. 93TVA Envelope p. 941. Press [PATCH/RHYTHM] to access the Patch Play screen,and select the part (keyboard part or pad part) and patchthat you want to edit.2. Press [PATCH EDIT], and then press [F3 (Zoom Edit)].fig.07-002_50The Zoom Edit screen will appear.1. Press [PATCH/RHYTHM] to access the Patch Play screen,and select the part (keyboard part or pad part) and rhythmset that you want to initialize (p. 52).2. Hold down [SHIFT] and press [F1 (Init)].A message will ask you for confirmation.3. Press [F8 (Exec)].The initialization will be carried out, and you’ll be returned tothe previous screen.To cancel, press [F7 (Cancel)].Initializing only a specific keyHere’s how to initialize only a specific key of a Rhythm Set.1. Press [PATCH/RHYTHM] to access the Patch Play screen,and select the part (keyboard part or pad part) and rhythmset that you want to initialize (p. 52).2. Press [PATCH EDIT].Press keys to specify the key (A0–C8) that is to be initialized.3. Press [F4 (Init)].Select the type of initialization.• ALL: All keys of the rhythm set will be initialized. (This isthe same as the rhythm set initialize proceduredescribed above.)• KEY: One key will be initialized.4. Press [F8 (Select)].A message will ask for confirmation.3. The parameters are organized into several edit groups.Press [F1]–[F4] to select the tab for the parameters that youwant to edit.• To select a Wave for editing or switch a Wave on/offPress [F8 (Wave Sw/Sel)].• To switch to a different part for editingPress [F7 (Part Select)].4. Use [CURSOR] to move the cursor to the parameter thatyou want to edit.You can use the realtime control knob to set the value.5. Turn the VALUE dial or use [INC][DEC] to modify the value.6. When you have finished editing, press [EXIT].Initializing Rhythm Set Settings(Init)“Initialize” means to return the settings of the currently selectedsound to a standard set of values or to the factory settings.5. Press [F8 (Exec)].The initialization will be carried out, and you’ll be returned tothe previous screen.To cancel, press [F7 (Cancel)].Copying Rhythm Tone Settings(Copy)This operation copies the settings of any desired rhythm set to thecurrently selected rhythm set. You can use this feature to make theediting process faster and easier.Basic Procedure for Rhythm ToneCopy1. Press [PATCH/RHYTHM] to access the Patch Play screen,and select the part (keyboard part or pad part) that you wantto edit and the copy-destination Rhythm set (p. 52).2. Press [PATCH EDIT].The Initialize operation will affect only the currently selectedsound; the sounds that are stored in user memory will not beaffected. If you wish to restore all of the Fantom’s settings totheir factory values, perform a Factory Reset (p. 235).84