Owner's Manual - Roland

Creating a PatchPortamento StartWhen another key is pressed during a pitch change produced byportamento, a new pitch change will begin. This setting specifies thepitch at which the change will begin.ValuePITCH:fig.06-048.eStarts a new portamento when another key ispressed while the pitch is changing.Miscellaneous Settings (Misc)fig.06-050_50PitchC5D4C4NOTE:fig.06-049.ePitchpress C4 keypress C5 keypress D4 keyTimePortamento will begin anew from the pitch wherethe current change would end.Tone Delay ModeSelects the type of tone delay.ValueNORM: The tone begins to play after the time specified in theDelay Time parameter has elapsed.fig.06-051.eNo Tone DelayC5Delay timeD4C4Portamento TimeWhen portamento is used, this specifies the time over which thepitch will change. Higher settings will cause the pitch change to thenext note to take more time.Value: 0–127press C4 keypress C5 keypress D4 keyTimeNote onHOLD:fig.06-052.eNote offAlthough the tone begins to play after the timespecified in the Delay Time parameter has elapsed, ifthe key is released before the time specified in theDelay Time parameter has elapsed, the tone is notplayed.Delay timeNo soundplayedNote onNote off78