Owner's Manual - Roland

Creating a PatchModifying Pitch (Pitch/Pitch Env)fig.06-029_50For details on these settings, refer to “How to Make PatchSettings” (p. 56).PitchPitch Key follow 4This specifies the amount of pitch change that will occur when youplay a key one octave higher (i.e., 12 keys upward on the keyboard).If you want the pitch to rise one octave as on a conventionalkeyboard, set this to “+100.” If you want the pitch to rise twooctaves, set this to “+200.” Conversely, set this to a negative value ifyou want the pitch to fall. With a setting of “0,” all keys will producethe same pitch.Value: -200, -190, -180, -170, -160, -150, -140, -130, -120, -110,-100, -90, -80, -70, -60, -50, -40, -30, -20, -10, 0, +10,+20, +30, +40, +50, +60, +70, +80, +90, +100, +110,+120, +130, +140, +150, +160, +170, +180, +190, +200fig.06-030.ePitch+200+100+500Tone Coarse Tune ★1-50Adjusts the pitch of the tone’s sound up or down in semitone steps(+/-4 octaves).Value: -48– +48-200 -100C1 C2 C3 C4 C5 C6 C7KeyTone Fine Tune ★ 2Adjusts the pitch of the tone’s sound up or down in 1-cent steps (+/-50 cents).Value: -50– +50One cent is 1/100th of a semitone.Random Pitch Depth 3This specifies the width of random pitch deviation that will occureach time a key is pressed. If you do not want the pitch to changerandomly, set this to “0.” These values are in units of cents (1/100thof a semitone).Value: 0, 1, 2, 3, 4, 5, 6, 7, 8, 9, 10, 20, 30, 40, 50, 60, 70, 80, 90,100, 200, 300, 400, 500, 600, 700, 800, 900, 1000, 1100,1200Bend Range Up (Pitch Bend Range Up)Specifies the degree of pitch change in semitones when the PitchBend lever is all the way right. For example, if this parameter is set to“12,” the pitch will rise one octave when the pitch bend lever ismoved to the right-most position.Value: 0– +48Bend Range Down (Pitch Bend Range Down)Specifies the degree of pitch change in semitones when the PitchBend lever is all the way left. For example if this is set to “-48” andyou move the pitch bend lever all the way to the left, the pitch willfall 4 octaves.Value: -48–0P-Env V-Sens(Pitch Envelope Velocity Sensitivity)Keyboard playing dynamics can be used to control the depth of thepitch envelope. If you want the pitch envelope to have more effectfor strongly played notes, set this parameter to a positive (+) value. Ifyou want the pitch envelope to have less effect for strongly playednotes, set this to a negative (-) value.Value: -63– +63P-Env T1 V-Sens(Pitch Envelope Time 1 Velocity Sensitivity)This allows keyboard dynamics to affect the Time 1 of the Pitchenvelope. If you want Time 1 to be speeded up for strongly playednotes, set this parameter to a positive (+) value. If you want it to beslowed down, set this to a negative (-) value.Value: -63– +6367