Owner's Manual - Roland

Creating a Patch8. Repeat steps 5-7 to set each parameter you want to edit.9. If you wish to save the changes you’ve made, press[WRITE] to perform the Save operation (p. 59). If you do notwish to save changes, press [EXIT] to return to the PatchPlay screen.If you return to the Patch Play screen without saving, an “*”will be displayed at the left of the patch number, indicating thatthe patch settings have been edited.If you turn off the power or select a different sound while thedisplay indicates “*,” your edited patch will be lost.4. Use [CURSOR] to move the cursor to the parameter thatyou want to edit.You can use the realtime control knob to set the value.5. Turn the VALUE dial or use [INC][DEC] to modify the value.6. When you have finished editing, press [EXIT].Initializing Patch Settings (Init)“Initialize” means to return the settings of the currently selectedsound to a standard set of values.In stead of using [F1] or [F2] in the patch edit screen, you canalso select the edit group by holding down [SHIFT] andpressing or . It is convenient to use this feature whenthe Tone SW/Select window is displayed.Editing in a Graphic Display(Zoom Edit)You can edit while viewing a graphic display of the most frequentlyused important parameters.Zoom Edit lets you edit the followingparameters.Parameter page Parameter pagePitch Envelope p. 68 Structure Type p. 63TVF p. 69 LFO 1/2 p. 74TVF Envelope p. 71 Step LFO p. 74TVA Envelope p. 72The Initialize operation will affect only the currently selectedsound; the sounds that are stored in user memory will not beaffected. If you wish to restore all of the Fantom-X’s settings totheir factory values, perform a Factory Reset (p. 235).1. Press [PATCH/RHYTHM] to access the Patch Play screen,and select the part (keyboard part or pad part) and patchthat you want to initialize (p. 39).2. Hold down [SHIFT] and press [F1 (Init)].A message will ask you for confirmation.3. Press [F8 (Exec)].The initialization will be carried out, and you’ll be returned tothe previous screen.To cancel, press [F7 (Cancel)].1. Press [PATCH/RHYTHM] to access the Patch Play screen,and select the part (keyboard part or pad part) and patchthat you want to edit.2. Press [PATCH EDIT], and then press [F3 (Zoom Edit)].fig.06-002_50The Zoom Edit screen will appear.3. The parameters are organized into several edit groups.Press [F1]–[F4] to select the tab for the parameters that youwant to edit.• To switch the parameter you want to editPress [F6].• To switch to a different part for editingPress [F7 (Part Select)].• To select a tone for editing or switch a tone on/offPress [F8 (Tone Sw/Sel)].57