Owner's Manual - Roland

Playing in Patch ModeKnobfig.05-021_50Switchfig.05-022_50For details on these settings, refer to “Assigning a Parameterto a Controller” (p. 48).For details on these settings, refer to “Assigning a Parameterto a Controller” (p. 34).Knob parameters are valid only when the REALTIMECONTROL button is set to “ASSIGNABLE.”Knob Assign 1–4 (Realtime Control KnobAssign 1–4)Specify the functions that will be controlled by the [] knobs.ValueCC01–31, 33–95: Controller numbers 1–31, 33–95For more information about Control Change messages, pleaserefer to “MIDI Implementation” (p. 298).Pitch Bend:Aftertouch:Arp Style:Arp Grid:Pitch BendAftertouchArpeggio StyleArpeggio GridArp Duration: Adjusts the duration of each arpeggiated noteArp Motif:Chord Form:Arpeggio MotifChord FormMaster Level: The volume of the entire Fantom-X.* Master Level adjusts the volume both of the OUTPUT A jacks and theDIGITAL OUT jack. The front panel VOLUME knob only adjusts thevolume of the OUTPUT A jacks.Arp Step:Digital In:Controls the playback position of the arpeggiopattern.Input level from DIGITAL IN.Assignable switches are valid only when the keyboard part isselected.Switch 1/2 (Assignable Switch 1–2)Specify the functions that will be controlled by the [ ]/[ ]buttons.ValueTranspose Down: Lowers the key range in semitone steps (upto 5 semitones lower).Transpose Up: Raises the key range in semitone steps (up to6 semitones higher).* Normally, the Transpose Down/Up functions are assigned to switches1/2.Tap Tempo: Tap tempo (a tempo specified by the intervalat which you press the button).Mono/Poly:Pressed to toggle between polyphonic(POLY) and monophonic (MONO) play of apatch.Indicator lit = MonoIndicator unlit = PolyPortamento: Portamento On/OffHold:Hold play On/OffMFX1–3 Sw: Multi-effect 1–3 switchChorus Sw:Chorus switchReverb Sw:Reverb switchMastering Sw: Mastering switchLoop:Loop play On/OffRhythm Start/Stop: Rhythm pattern playback On/Off51