12.07.2015 Views

Owner's Manual - Roland

Owner's Manual - Roland

Owner's Manual - Roland

SHOW MORE
SHOW LESS
  • No tags were found...

You also want an ePaper? Increase the reach of your titles

YUMPU automatically turns print PDFs into web optimized ePapers that Google loves.

Playing in Patch Mode1. Press [PATCH/RHYTHM] to access the Patch Play screen.fig.05-001.ePatch typePatch groupPatch numberPatch namePatch CategorySelecting Patches by Category(Patch Finder)The Fantom-X provides a “Patch Search function” (Patch Finder)which allows you to specify a type (category) of patch so that youcan quickly find the desired patch. There are a total of 38 categories.1. Press [PATCH/RHYTHM] to access the Patch Play screen.fig.05-001.ePatch typePatch groupPatch numberPatch namePatch Category2. Press [F7 (Part Kbd)] or [F8 (Part Pad)] to move the cursorto the pad part or the keyboard part.fig.05-006.ePatch typePatch groupPatch number2. Make sure that the patch type is set to “PATCH.”If this is set to “Rhythm,” use [CURSOR] to move the cursor tothe switch, and turn the VALUE dial or press [DEC] to select“Patch.”3. If you selected a patch group, turn the VALUE dial or use[INC][DEC] to choose the patch group.USER: UserPR-A–H:CARD:GM:Preset A–HMemory CardGM (GM2)XP-A–D: Wave Expansion Boards installed in EXP-A–D Slots* Make sure that the patch type select switch is set to “Patch.” If this isset to “Rhythm,” use [CURSOR] to move the cursor to the switch,and turn the VALUE dial or press [DEC] to select “Patch.”3. Use [CURSOR] to move the cursor to the “Patch Category,”and turn the VALUE dial, or press [INC]/[DEC] to select thedesired category.4. Press to move the cursor to “Lock,” and turn the VALUEdial or press [INC] to add a check mark (✔).5. Use [CURSOR] to move the cursor to the patch group orpatch number, and turn the VALUE dial or use [INC]/[DEC]to select the patch.When the cursor is located at the Patch group, you can select thegroup. When the cursor is located at the Patch number, you canspecify the number.4. Press [CURSOR] to move the cursor to the patch group.5. Turn the VALUE dial, or press [INC]/[DEC] to select a patchgroup.6. If you selected a patch for the pad part, play the pads tohear the sound. If you selected a patch for the keyboardpart, play the keyboard to hear the sound.40

Hooray! Your file is uploaded and ready to be published.

Saved successfully!

Ooh no, something went wrong!