12.07.2015 Views

Owner's Manual - Roland

Owner's Manual - Roland

Owner's Manual - Roland

SHOW MORE
SHOW LESS
  • No tags were found...

You also want an ePaper? Increase the reach of your titles

YUMPU automatically turns print PDFs into web optimized ePapers that Google loves.

MIDI Implementation4. Data transmission (Sequencer Section)4.1 Messages transmitted during playingRecorded messages are transmitted during playback.4.2 Soft Thru settingMessages (except System Common and System Realtime Messages) that are received arethen sent out when Soft Thru parameter (System/Sync/Tempo) is switched to ON.4.3 Messages that are generated and transmitted4.3.1 Messages Appearing When Synchronizingwith Other Devices■System Common Messages* Sent when Sync Output parameter (System/Sync/Tempo) is set to ON.●Song Position PointerStatus 2nd byte 3rd byteF2H mmH llHmm, ll=value: 00 00H - 7F 7FH (0 - 16383)■System Realtime Messages* Sent when Sync Output parameter (System/Sync/Tempo) is set to ON.●Timing ClockStatusF8H●StartStatusFAH●ContinueStatusFBH●StopStatusFCH●Quarter Frame MessagesStatusF1H2nd bytemmH (= 0nnndddd)* Sent when Sync Mode parameter (System/Sync/Tempo) is set to MASTER and MTCSync Output parameter (System/Sync/Tempo) is set to ON. Furthermore, sending aQuarter Frame Message with “00h00m00s00f00” at the beginning of the song adds theMTC Offset Time parameter (System/Sync/Tempo).■System Exclusive Message●MIDI Time code❍Full MessageFull Messages are used, which encode the complete time into a single message.This message transmitted when the song position moves.Status Data Byte StatusF0H, 7FH xxH, 01H, 01H, hrH, mnH, scH, frHF7HF0H, 7FH : Realtime Universal System Exclusive HeaderxxH : 7F (Device ID)01H : sub-ID #1 (MIDI Time code)01H : sub-ID #2 (Full Message)hrH : hours and type: 0 yy zzzzzyy type:00 = 24 Flame/sec01 = 25 Flame/sec10 = 30 Flame/sec11 = 30 Flame/seczzzzz : Hours (00 - 23)mnH : Minutes (00 - 59)scH : Seconds (00 - 59)frH : Frames (00 - 29)F7H : EOX (End of Exclusive)●MIDI Machine Control (MMC)* Not received when the MMC Mode parameter (System/Sync/Tempo) is Master.❍STOP (MCS)Status Data byte StatusF0H7FH, dev, 06H, 01H F7HByteRemarksF0HExclusive status7FHUniversal System Exclusive Realtime Header7FHDevice ID06HMMC command message01HSTOP (MCS)F7HEOX (End of Exclusive)❍DEFFERRED PLAY (MCS)Status Data byte StatusF0H 7FH, dev, 06H, 03H F7HByteRemarksF0HExclusive status7FHUniversal System Exclusive Realtime Header7FHDevice ID06HMMC command message03HDEFERRED PLAY (MCS)F7HEOX (End of Exclusive)❍LOCATE (MCP)❍Format2—LOCATE [TARGET]Status Data byte StatusF0H 7FH, dev, 06H, 44H, 06H, 01H, hrH, mnH, scH, frH, ffH F7HByteF0H7FH7FH06H44H06H01HhrHmnHscHfrHffHF7HRemarksExclusive statusUniversal System Exclusive Realtime HeaderDevice IDMMC command messageLOCATE (MCP)Byte count“TARGET” sub-CommandStandard Time Specification with subframesEOX (End of Exclusive)310

Hooray! Your file is uploaded and ready to be published.

Saved successfully!

Ooh no, something went wrong!