Owner's Manual - Roland

More documents

Recommendations

Info

MIDI Implementation■System Exclusive MessagesStatus Data byte StatusF0H iiH, ddH, ......, eeH F7HF0H:System Exclusive message statusii=ID number: This is the ID number (manufacturer ID) that specifies themanufacturer whose exclusive message this is. <strong>Roland</strong>’s manufacturerID is 41H. ID numbers 7EH and 7FH are defined in an expansion ofthe MIDI standard as Universal Non-real-time messages (7EH) andUniversal Realtime Messages (7FH).dd,..., ee = data: 00H - 7FH (0 - 127)F7H:EOX (End of System Exclusive)* Not received when the System Exclusive parameter (Recording Select window) is OFF.* MIDI Machine Control and MIDI Time code is not recorded. (Refer to “3.3 Messagesacknowledged for synchronization”)3.2 Messages not recorded during recording■Channel mode messages●Local On/Off (Controller number 122)Status 2nd byte 3rd byteBnH 7AH vvHn=MIDI channel number:0H - FH (ch.1 - ch.16)vv=Value:00H, 7FH (Local Off, Local On)●All notes off (Controller number 123)Status 2nd byte 3rd byteBnH 7BH 00Hn=MIDI channel number:0H - FH (ch.1 - ch.16)* When an All Note Off message is received, all notes of the corresponding channel thatare on will be sent Note Off’s, and the resulting Note Off messages will be recorded.3.3 Messages acknowledged for synchronization■System Common messages●Tune RequestStatusF6H●MIDI Time Code Quarter Frame MessagesMIDI Time Code Quarter Frame Messages can be transmitted while the sequencer isrunning (Playing or Recording) if the Sync Mode parameter (System/Sync/Tempo) isMASTER and MTC Sync Output parameter (System/Sync/Tempo) is ON. The transmittedtime counts are summed to MTC Offset Time parameter (System/Sync/Tempo) as the songtop is “00:00:00:00.”The sequencer synchronizes with the time counts which are summed to MTC Offset Timeparameter (System/Sync/Tempo) as the song top is “00:00:00:00” if the Sync Modeparameter (System/Sync/Tempo) is SLAVE(MTC).StatusSecondF1HmmH (= 0nnndddd)nnn = Message type :0 = Frame count LS nibble1 = Frame count MS nibble2 = Seconds count LS nibble3 = Seconds count MS nibble4 = Minutes count LS nibble5 = Minutes count MS nibble6 = Hours count LS nibble7 = Hours count MS nibbledddd = 4 bit nibble data : h - FH (0 - 15)Bit Field is assigned as follows.Frame Count xxxyyyyyxxx Reserved (000)yyyyyFrame No.(0-29)Seconds Count xxyyyyyyxx Reserved (00)yyyyyy Seconds (0-59)Minutes Count xxyyyyyyxx Reserved (00)yyyyyy Minutes (0-59)Hours Count xyyzzzzzx Reserved (0)yyTime Code type0 = 24 Frames / Sec1 = 25 Frames / Sec2 = 30 Frames / Sec (Drop Frame)3 = 30 Frames / Sec (Non Drop Framezzzzz Hours (0-23)●Song Position PointerStatus 2nd byte 3rd byteF2H mmH llHmm, ll=value: 00 00H - 7F 7FH (0 - 16383)308
MIDI Implementation■System Realtime Messages●Timing ClockStatusF8H* Received when Sync Mode parameter (System/Sync/Tempo) is set to SLAVE-MIDI.●StartStatusFAH* Received when Sync Mode parameter (System/Sync/Tempo) is set to SLAVE-MIDI orREMOTE.●ContinueStatusFBH* Received when Sync Mode parameter (System/Sync/Tempo) is set to SLAVE-MIDI orREMOTE.■System Exclusive Message●MIDI Machine Control (MMC)* Received when the MMC Mode parameter (System/Sync/Tempo) is SLAVE.❍STOP (MCS)Status Data byte StatusF0H 7FH, dev, 06H, 01H F7HByteRemarksF0HExclusive status7FHUniversal System Exclusive Realtime Header7FHDevice ID06HMMC command message01HSTOP (MCS)F7HEOX (End of Exclusive)❍DEFERRED PLAY (MCS)Status Data byte StatusF0H 7FH, dev, 06H, 03H F7H●StopStatusFCH* Received when Sync Mode parameter (System/Sync/Tempo) is set to SLAVE-MIDI orREMOTE.ByteF0H7FH7FH06H03HF7HRemarksExclusive statusUniversal System Exclusive Realtime HeaderDevice IDMMC command messageDEFERRED PLAY (MCS)EOX (End of Exclusive)❍LOCATE (MCP)❍Format2—LOCATE [TARGET]Status Data byte StatusF0H 7FH, dev, 06H, 44H, 06H, 01H, F7HhrH, mnH, scH, frH, ffHByteF0H7FH7FH06H44H06H01HhrHmnHscHfrHffHF7HRemarksExclusive statusUniversal System Exclusive Realtime HeaderDevice IDMMC command messageLOCATE (MCP)Byte count“TARGET” sub-CommandStandard Time Specification with subframesEOX (End of Exclusive)309
Page 1 and 2:
Owner’s ManualThank you, and cong
Page 3 and 4:
USING THE UNIT SAFELYUsed for instr
Page 5 and 6:
IMPORTANT NOTESMaintenance401a• F
Page 7 and 8:
ContentsPlaying in Patch Mode .....
Page 9 and 10:
ContentsCreating a Performance ....
Page 11 and 12:
ContentsUsing the Pads.............
Page 13 and 14:
ContentsMaking Reverb Settings (Rev
Page 15 and 16:
Main FeaturesCutting-edge sound eng
Page 17 and 18:
Panel Descriptions[STOP]Controls se
Page 19 and 20:
Getting ReadyConnecting an Amp and
Page 21 and 22:
Getting ReadyTurning On the PowerOn
Page 23 and 24:
Listening to the Demo SongsThe Fant
Page 25 and 26:
Various Performance FeaturesControl
Page 27 and 28:
Overview of the Fantom-XLFO (Low Fr
Page 29 and 30:
Overview of the Fantom-XTemporary M
Page 31 and 32:
Overview of the Fantom-XTempo Track
Page 33 and 34:
Overview of the Fantom-XBasic Opera
Page 35 and 36:
Overview of the Fantom-XModifying a
Page 37 and 38:
Overview of the Fantom-XRegistering
Page 39 and 40:
Playing in Patch ModeFunctions in t
Page 41 and 42:
Playing in Patch ModeThe following
Page 43 and 44:
Playing in Patch ModeRegistering a
Page 45 and 46:
Playing in Patch ModeRegistering Fa
Page 47 and 48:
Playing in Patch ModeCreating Smoot
Page 49 and 50:
Playing in Patch ModeD Beam (Solo S
Page 51 and 52:
Playing in Patch ModeKnobfig.05-021
Page 53 and 54:
Playing in Patch ModePlaying a Rhyt
Page 55 and 56:
Playing in Piano Mode2. Use the VAL
Page 57 and 58:
Creating a Patch8. Repeat steps 5-7
Page 59 and 60:
Creating a PatchCautions When Using
Page 61 and 62:
Creating a PatchPatch CategorySpeci
Page 63 and 64:
Creating a PatchWave Gain1FXM Color
Page 65 and 66:
Creating a PatchBooster 1&2, 3&4 (B
Page 67 and 68:
Creating a PatchModifying Pitch (Pi
Page 69 and 70:
Creating a PatchModifying the Brigh
Page 71 and 72:
Creating a PatchTVF ENVF-Env Depth
Page 73 and 74:
Creating a PatchA-Env T4 V-Sens (TV
Page 75 and 76:
Creating a PatchRate Detune (LFO1/L
Page 77 and 78:
Creating a PatchApply Portamento or
Page 79 and 80:
Creating a PatchOFF-N:fig.06-053.eR
Page 81 and 82:
Creating a PatchMatrix Control 1-4
Page 83 and 84:
Creating a Rhythm SetWith the Fanto
Page 85 and 86:
Creating a Rhythm Set3. Press [F5 (
Page 87 and 88:
Creating a Rhythm Set4. If you wish
Page 89 and 90:
Creating a Rhythm SetWave No. L (Mo
Page 91 and 92:
Creating a Rhythm SetPitchTone Coar
Page 93 and 94:
Creating a Rhythm SetCutoff V-Sens
Page 95 and 96:
Creating a Rhythm SetA-Env Level 1-
Page 97 and 98:
Playing in Performance ModeA perfor
Page 99 and 100:
Playing in Performance ModeSelectin
Page 101 and 102:
Page 103 and 104:
Playing in Performance ModeUsing th
Page 105 and 106:
Page 107 and 108:
Creating a PerformanceWith the Fant
Page 109 and 110:
Creating a Performance[F3 (Pitch)]f
Page 111 and 112:
Creating a PerformanceKeyboard Rang
Page 113 and 114:
Creating a PerformanceExt Pan (Exte
Page 115 and 116:
Creating a PerformanceD Beam (Solo
Page 117 and 118:
Creating a PerformanceKnobfig.09-01
Page 119 and 120:
Creating a PerformanceControl D Bea
Page 121 and 122:
Modifying the Sound in Real TimeYou
Page 123 and 124:
Modifying the Sound in Real TimePad
Page 125 and 126:
Modifying the Sound in Real TimeCha
Page 127 and 128:
Modifying the Sound in Real Time127
Page 129 and 130:
Playing Arpeggios1. Connect an opti
Page 131 and 132:
Playing ArpeggiosHanging the Range
Page 133 and 134:
Using the Chord Memory Function (Ch
Page 135 and 136:
Playing RhythmsAbout Rhythm Pattern
Page 137 and 138:
Playing RhythmsChanging the Beat an
Page 139 and 140:
Playing RhythmsSaving the Patterns
Page 141 and 142:
SamplingThe Fantom-X lets you sampl
Page 143 and 144:
Sampling• Re-Sampling: [F2 (Re-Sa
Page 145 and 146:
SamplingSampling Earlier in Time(Sk
Page 147 and 148:
Editing a SampleLoading a SampleHer
Page 149 and 150:
Editing a SampleSetting the Start/E
Page 151 and 152:
Editing a SampleAssigning Samples t
Page 153 and 154:
Editing a Sample3. Press [F7 (Load
Page 155 and 156:
Editing a Sample6. When you’ve fi
Page 157 and 158:
Editing a Sample3. Press [F5 (Time
Page 159 and 160:
Editing a Sample4. Either turn the
Page 161 and 162:
Using the PadsMaking Settings for t
Page 163 and 164:
Using the PadsAssigning a Pattern t
Page 165 and 166:
Playing Back a Song4. Press [PLAY]
Page 167 and 168:
Playing Back a SongUsing the D Beam
Page 169 and 170:
Recording SongsSpecify the Time Sig
Page 171 and 172:
Recording SongsRecording Tempo Chan
Page 173 and 174:
Recording Songs4. Turn the VALUE di
Page 175 and 176:
Recording Songs• Step BackCancel
Page 177 and 178:
Editing SongsThis chapter explains
Page 179 and 180:
Editing Songs3. Turn the VALUE dial
Page 181 and 182:
Editing SongsAligning a Song’s Ti
Page 183 and 184:
Editing SongsRange Min, Range MaxSp
Page 185 and 186:
Editing SongsStatusSelects the type
Page 187 and 188:
Editing SongsMeasure, For (Edit Ran
Page 189 and 190:
Editing SongsExtract ModeSpecifies
Page 191 and 192:
Editing SongsStatusSelects the type
Page 193 and 194:
Editing Songs5. When you are finish
Page 195 and 196:
Editing SongsErasing Sequencer Data
Page 197 and 198:
Editing SongsAssigning a Name to aS
Page 199 and 200:
Saving/Loading a song (Save/Load)Sa
Page 201 and 202:
Saving/Loading a song (Save/Load)If
Page 203 and 204:
Playing a Phrase at the Touch of a
Page 205 and 206:
Playing a Phrase at the Touch of a
Page 207 and 208:
Adding EffectsApplying Effects in P
Page 209 and 210:
Adding Effects13Chorus Output Selec
Page 211 and 212:
Adding Effects6Part Reverb Send Lev
Page 213 and 214:
Adding EffectsMaking Multi-EffectsS
Page 215 and 216:
Adding EffectsSpecifying the multi-
Page 217 and 218:
Adding EffectsMastering EffectThis
Page 219 and 220:
Connecting to Your Computer via USB
Page 221 and 222:
Connecting to Your Computer via USB
Page 223 and 224:
File-Related Functions (File Utilit
Page 225 and 226:
Settings Common to All Modes (Syste
Page 227 and 228:
Page 229 and 230:
Page 231 and 232:
Page 233 and 234:
Page 235 and 236:
Data Management FunctionsReset to D
Page 237 and 238:
Using Fantom-X EditorFantom-X Edito
Page 239 and 240:
About V-LINKV-LINK ParametersNote T
Page 241 and 242:
Installing the Wave Expansion Board
Page 243 and 244:
Installation de la carte d’expans
Page 245 and 246:
Expanding the Memory4. Paying atten
Page 247 and 248:
Ajouter de la mémoire4. Prenez bie
Page 249 and 250:
TroubleshootingIf the Fantom-X does
Page 251 and 252:
TroubleshootingIssues Related to Ef
Page 253 and 254:
Troubleshooting• Is the data conc
Page 255 and 256:
Parameter ListPatch ParameterGenera
Page 257 and 258: Parameter ListTVA Env Group (P.72)P
Page 259 and 260: Parameter ListRhythm Set ParameterG
Page 261 and 262: Parameter ListEffect Group (P.207)P
Page 263 and 264: Parameter ListParameterValue[F8 (MI
Page 265 and 266: Parameter ListRhythm Group Paramete
Page 267 and 268: Parameter ListMIDI Group (P.230)Par
Page 269 and 270: Parameter ListV-LINK Group (P.239)P
Page 271 and 272: Effects List01: EQUALIZERThis is a
Page 273 and 274: Effects List08: AUTO WAHCyclically
Page 275 and 276: Effects List15: RING MODULATORThis
Page 277 and 278: Effects List23: CHORUSThis is a ste
Page 279 and 280: Effects List30: 3D FLANGERThis appl
Page 281 and 282: Effects List35: OVERDRIVECreates a
Page 283 and 284: Effects List44: LONG DELAYA delay t
Page 285 and 286: Effects ListParameter Range Explana
Page 287 and 288: Effects List57: LOFI COMPRESSThis i
Page 289 and 290: Effects ListParameter Value Descrip
Page 291 and 292: Effects List74: ENHANCER → DELAYf
Page 293 and 294: Effects ListAbout the STEP RESET fu
Page 295 and 296: Effects List05: NOISE SUPPRESSORSup
Page 297 and 298: About MIDIMIDI (Musical Instruments
Page 299 and 300: MIDI Implementation❍Hold 1 (Contr
Page 301 and 302: MIDI Implementation■Channel Mode
Page 303 and 304: MIDI Implementation❍Channel Press
Page 305 and 306: MIDI Implementation❍Volume (Contr
Page 307: MIDI Implementation3. Data receptio
Page 311 and 312: MIDI Implementation5. Parameter Add
Page 313 and 314: MIDI Implementation| 00 06 | 0000 0
Page 315 and 316: MIDI Implementation| | 0000 cccc |
Page 317 and 318: MIDI Implementation|# 00 54 | 0000
Page 319 and 320: MIDI Implementation| | | USER, PRES
Page 321 and 322: MIDI Implementation| | | -20000 - +
Page 323 and 324: MIDI Implementation|—————
Page 325 and 326: MIDI Implementation| | 0000 dddd |
Page 327 and 328: MIDI Implementation| | | -64 - +63
Page 329 and 330: MIDI Implementation■Example of an
Page 331 and 332: (Sound Generator Section)Model Fant
Page 333 and 334: SpecificationsFantom-X6/X7/X8:Synth
Page 335 and 336: IndexSymbols+OCT/-OCT .............
Page 337 and 338: IndexDeletingDividing Point .......
Page 339 and 340: IndexMMagnify .....................
Page 341 and 342: IndexP-Env DepthPatch .............
Page 343 and 344: IndexSolo/Portamento ..............
Page 345 and 346: IndexVoice Reserve ................
Page 347 and 348: Model Name :Type of Equipment :Resp
show all

Owner's Manual - Roland

Create successful ePaper yourself

Delete template?

Save as template?