Owner's Manual - Roland
Owner's Manual - Roland
Owner's Manual - Roland
- No tags were found...
Create successful ePaper yourself
Turn your PDF publications into a flip-book with our unique Google optimized e-Paper software.
MIDI Implementation1. Receive Data (Sound Source Section)■Channel Voice Messages* Not received in Performance mode when the Receive Switch parameter (PERFORM/MIDI) is OFF.●Note offStatus 2nd byte 3rd byte8nH kkH vvH9nH kkH 00Hn = MIDI channel number: 0H - FH (ch.1 - 16)kk = note number: 00H - 7FH (0 - 127)vv = note off velocity: 00H - 7FH (0 - 127)* Not received when the Envelope Mode parameter (PATCH/MISC and RHYTHM/GENERAL) is NO-SUS.●Note onStatus 2nd byte 3rd byte9nH kkH vvHn = MIDI channel number: 0H - FH (ch.1 - 16)kk = note number: 00H - 7FH (0 - 127)vv = note on velocity: 01H - 7FH (1 - 127)●Polyphonic Key PressureStatus 2nd byte 3rd byteAnH kkH vvHn = MIDI channel number: 0H - FH (ch.1 - 16)kk = note number: 00H - 7FH (0 - 127)vv = Polyphonic Key Pressure: 00H - 7FH (0 - 127)* Not received in Performance mode when the Receive Poly Key Pressure parameter(PERFORM/MIDI) is OFF.●Control Change* If the corresponding Controller number is selected for the Patch Control Source 1, 2, 3 or4 parameter (PATCH/CTRL1-4), the corresponding effect will occur.* If a Controller number that corresponds to the System Control Source 1, 2, 3 or 4parameter (SYSTEM/SYSTEM CONTROL) is selected, the specified effect will apply ifPatch Control Source 1, 2, 3 or 4 parameter (PATCH/CTRL1–4) is set to SYS-CTRL1,SYS-CTRL2, SYS-CTRL3 or SYS-CTRL4.❍Bank Select (Controller number 0, 32)Status 2nd byte 3rd byteBnH 00H mmHBnH 20H llHn = MIDI channel number: 0H - FH (ch.1 - 16)mm, ll = Bank number: 00 00H - 7F 7FH (bank.1 - bank.16384)* Not received in Performance mode when the Receive Bank Select (PERFORM/MIDI) isOFF.* The Performances, Patches, and Rhythms corresponding to each Bank Select are asfollows.* The SRX series corresponding to each Bank Select are to see the SRX series owner’smanual.BANK SELECT | PROGRAM | GROUP | NUMBERMSB | LSB | NUMBER | |-----+-----------+-----------+----------------------+-----------000 | | 001 - 128 | GM Patch | 001 - 256: | | | |063 | | 001 - 128 | GM Patch | 001 - 256085 | 000 | 001 - 064 | User Performance | 001 - 064| 032 | 001 - 064 | Card Performance | 001 - 064| 064 | 001 - 064 | Preset Performance | 001 - 064086 | 000 | 001 - 032 | User Rhythm | 001 - 032| 032 | 001 - 032 | Card Rhythm | 001 - 032| 064 | 001 - 032 | Preset Rhythm | 001 - 032087 | 000 | 001 - 128 | User Patch | 001 - 128| 001 | 001 - 128 | User Patch | 129 - 256| 032 | 001 - 128 | Card Patch | 001 - 128| 033 | 001 - 128 | Card Patch | 129 - 256| 064 | 001 - 128 | Preset Patch A | 001 - 128| 065 | 001 - 128 | Preset Patch B | 001 - 128| : | | : |092 | 000 - | 001 - | SRX Rhythm | 001 -| : | | : |093 | 000 - | 001 - | SRX Patch | 001 -| : | | : |120 | | 001 - 057 | GM Rhythm | 001 - 009121 | 000 - | 001 - 128 | GM Patch | 001 - 256❍Modulation (Controller number 1)Status 2nd byte 3rd byteBnH 01H vvHn = MIDI channel number: 0H - FH (ch.1 - 16)vv = Modulation depth: 00H - 7FH (0 - 127)* Not received in Performance mode when the Receive Modulation parameter(PERFORM/MIDI) is OFF.❍Breath type (Controller number 2)Status 2nd byte 3rd byteBnH 02H vvHn = MIDI channel number: 0H - FH (ch.1 - 16)vv = Control value: 00H - 7FH (0 - 127)❍Foot type (Controller number 4)Status 2nd byte 3rd byteBnH 04H vvHn = MIDI channel number: 0H - FH (ch.1 - 16)vv = Control value: 00H - 7FH (0 - 127)❍Portamento Time (Controller number 5)Status 2nd byte 3rd byteBnH 05H vvHn = MIDI channel number: 0H - FH (ch.1 - 16)vv = Portamento Time: 00H - 7FH (0 - 127)* In Performance mode the Part Portament Time parameter (PERFORM/PART) willchange.❍Data Entry (Controller number 6, 38)Status 2nd byte 3rd byteBnH 06H mmHBnH 26H llHn = MIDI channel number: 0H - FH (ch.1 - 16)mm, ll = the value of the parameter specified by RPN/NRPNmm = MSB, ll = LSB❍Volume (Controller number 7)Status 2nd byte 3rd byteBnH 07H vvHn = MIDI channel number: 0H - FH (ch.1 - 16)vv = Volume: 00H - 7FH (0 - 127)* Not received in Performance mode when the Receive Volume parameter (PERFORM/MIDI) is OFF.* In Performance mode the Part Level parameter (PERFORM/PART) will change.❍Balance (Controller number 8)Status 2nd byte 3rd byteBnH 08H vvHn = MIDI channel number: 0H - FH (ch.1 - 16)vv = Balance: 00H - 7FH (0 - 127)❍Panpot (Controller number 10)Status 2nd byte 3rd byteBnH 0AH vvHn = MIDI channel number: 0H - FH (ch.1 - 16)vv = Panpot:00H - 40H - 7FH (Left - Center - Right),* Not received in Performance mode when the Receive Pan parameter (PERFORM/MIDI)is OFF.* In Performance mode the Part Pan parameter (PERFORM/PART) will change.❍Expression (Controller number 11)Status 2nd byte 3rd byteBnH 0BH vvHn = MIDI channel number: 0H - FH (ch.1 - 16)vv = Expression: 00H - 7FH (0 - 127)* Not received when Tone Receive Expression parameter (PATCH/MISC or RHYTHM/GENERAL) is OFF.* Not received in Performance mode when Receive Expression parameter (PERFORM/MIDI) is OFF.298